Puts an end to muzzle flip and felt recoil for more comfortable shooting and faster follow-up shots. Models available to fit rifles chambered in .223/5.56mm or .308/7.62mm with standard threaded muzzles. No machining, cutting, or fitting required to install on most guns. Just remove the factory brake and screw this one on. SPECS: Machined steel, mil-spec manganese phosphate finish, black. Lock nut included. .223 – 2″ (5cm) long, 3⁄4″ (19mm) dia., 1⁄2″-28 tpi threads. .308 – 27⁄8″ (7.3cm) long, 1″ (2.5cm) dia., 5⁄8″-24 tpi threads.
ARC 30-round magazine has a reinforced polymer body with unparalleled crush- and impact resistance, plus the latest features to ensure outstanding reliability. Two-piece body has straight walls and the optimal angle for the top half of the mag, with a constant-radius curve in the lower half for stable movement of the round stack. Molded-in reinforcing ridges, four interlocking tabs, and advanced, industrial-strength adhesive ensure that the joint between the halves is the strongest part of the body. Without a separate floorplate or lengthwise welded seam, the body forms an ultra-rigid, five-sided box that won’t fail when dropped free on hard pavement, and it resists crushing forces beyond what GI mags can handle. Sealed body keeps out dirt, dust, and moisture; if necessary, clean the inside by blowing compressed air or water through relief holes in the top of the follower. Proprietary anti-tilt follower of self-lubricating polymer rides smoothly in slots to ensure reliable, snag-free ammo flow. Premium-grade chrome-silicon steel spring is heat-treated to relieve stress and moly-coated for corrosion resistance and smooth movement; fully tested to ensure retention of spring force through 100,000 compression cycles. Reinforced feed lips stand up to the battering of sustained full-auto fire. Deep serrations on the front and rear of the body, plus an aggressive waffle pattern on the sides gives a non-slip grasp. Drops free from mil-spec mag wells, and seats easily on a closed bolt even with a full 30-round load. Fits most mag pouches that accept 30-round USGI magazines, including Brownells MOLLE-compatible pouches and Olongapo Outfitters Grab & Go pouch, both available separately. Available in black, Flat Dark Earth, and Foliage Green to match popular camouflage schemes.Check out the 360 Image of the Tangodown AR-15/M16 ARC Magazine. SPECS: Injection-molded polymer, black, dark earth, foliage green. Fits AR-15/M16/M4, FN SCAR-Light, and M249 machine gun. Holds 30 rounds of .223/5.56mm ammunition.
Multi-purpose front sight works as a fully functional gas block, plus delivers lifesaving backup when primary optics fail or become hindered by low light or poor weather conditions. Machined, steel body features a spring-loaded pushbutton that locks sight in the deployed position. When not in use, simply depress the button and fold down for an unobstructed view through your optics. Protective ears guard the sight post from blows incurred during duty. Split, barrel clamp design allows easy mounting to standard contour barrels without removal of flash hiders or muzzle brakes. Hex cap screws pull clamping halves tight to barrel for complete sight immobilization when properly tightened. Durable, mil-spec, phosphate finish resists rust and corrosion. YHM-9394 includes bayonet lug and pivoting sling swivel that accepts tactical slings up to 1 ” wide. Rubber coating prevents swivel from rattling and giving away your position while on patrol. YHM-9395 has sling swivel, no bayonet lug. YHM-9835A has Picatinny-style under-rail that accepts lights, lasers, and other forward-mounted accessories. No sling swivel. SPECS: Steel, phosphate-coated finish, dark gray. 1-7⁄8″ (4.8cm) long, 1-3⁄16″ (3cm) wide. Sight Post 2 ” (5.7cm) high when raised. Fits standard, .750″ diameter barrels. YHM-9394 6 oz. (170g) weight. YHM-9395 – 5.5 oz. (156g) weight. YHM-9835A 7.7 oz. (219 g) weight.
Molded, polymer, vertical grip attaches to Picatinny and Weaver-style accessory rails on your AR-15 handguard for superior control and improved weapon retention. Grooved, grip area ensures positive, non-slip hold in all tactical situations. Reduces fatigue and improves muzzle control in close quarters. Threaded shaft, with tightening knob, locks grip to rail, plus, makes removal fast and easy when shooting from a bench or bipod. Rubber O-ring prevents accidental loosening. Check out the video demonstration of the various vertical grips offered by Brownells. SPECS: Polymer, black. 4 ” (12.1cm) long.
Convenient kit contains all the components needed to mount the buttstock of your choice on an AR-15 rifle or carbine. Perfect for stock conversions such as altering a rifle to accept a collapsible carbine stock. All parts are manufactured from the highest quality materials and held to strict dimensional tolerances for proper fit and function. Kits available for the four standard buttstock types. A1 rifle kit contains receiver extension tube, recoil buffer, recoil buffer spring, and buttstock cap screw. A2 rifle kit adds to A1 kit contents the correct buttstock spacer required for A2 rifle stocks. Carbine kits contain receiver extension, carbine recoil spring, carbine recoil buffer, lock ring, and receiver plate. Commercial carbine kit comes with 1.17″ O.D., six-position receiver extension for use with commercial or “universal” buttstocks. Mil-Spec kit has a 1.14″ O.D., five-position receiver extension for correct fit of military M4 carbine buttstocks. M4 buttstocks and clones will not fit Commercial tubes. SPECS: Receiver Extension & A2 Stock Spacer Aluminum, anodized, matte black. Recoil Buffer Aluminum and steel. Spring, Lock Ring, Receiver Plate Steel. Kits fit standard, mil-spec AR-15/M16/M4 lower receiver and clones. Installation instructions included.
Solidly clamps to either side of an AR-15, front sight base. Features two Picatinny rails for holding lights, lasers, sling adapters and other accessories. Machined for a secure fit so it won’t rotate or twist out of alignment. SPECS: Aluminum, anodized, black, matte. 1 ” long. 2.3 oz. (66 g) wt.
Convenient kits contain all the components needed to securely mount the buttstock of your choice using original factory parts from the manufacturer of your receiver. Eliminates the hassle of tracking down every part and accidentally getting incorrect ones for your stock. Have everything you need to finish your build, so you won’t be held up waiting for that one part you forgot to order. Each kit contains original factory parts; parts from one manufacturer will fit another manufacturer’s receiver but may require minor fitting. Select the buttstock you want (available separately), then purchase the mounting kit for that type of stock. A2 Rifle kit is for mounting any fixed rifle buttstock based on the military M16A2 stock. Includes receiver extension tube, recoil buffer, buffer spring, buttstock spacer, and buttstock screw. Mil-Spec Carbine kit is for adjustable-length carbine buttstock that requires M4-type 1.14″ O.D. buffer tube. Includes receiver extension tube, carbine recoil buffer, buffer spring, receiver plate, and lock nut. Commercial Carbine – For adjustable-length carbine buttstock that requires a “commercial” 1.17″ O.D. buffer tube; same components breakdown as Mil-Spec kit.COLT – From the original manufacturer of the M16 battle rifle, this kit contains the four-position, Mil-Spec receiver extension used on the Colt M4 and Law Enforcement carbines.DPMS – Factory parts used in the popular Panther™ rifle series. A2 Rifle, Mil-Spec and Commercial Carbine kits available.HIGH STANDARD – Original parts used in the HSA-15 series of rifles and carbines. Commercial Carbine and fixed A2 Rifle kits available. SPECS: A2 Rifle – Receiver extension: 10-1⁄8″ (25.7cm) OAL. Mil-Spec Carbine – Receiver extension: 7 ” OAL (18.4cm), 1.14″ O.D. Six locking positions for buttstock, unless otherwise indicated. Commercial Carbine – Receiver extension: 7 ” (19.7cm) OAL, 1.17″ O.D. Six locking positions.
Ready-to-install, match-grade barrels machined from premium-quality steels for building a precise-shooting, customized tactical, varmint, or competition rifle. A leading manufacturer of M2 .50 caliber machine gun and 7.62mm mini-gun barrels for the United States military, Sabre brings the same advanced materials and manufacturing technology to their AR-15/M16 barrels. Machined to exacting tolerances from ordnance-grade chrome-moly-vanadium steel alloy or extra-hard 410 stainless steel. Heat treated to relieve internal stress in the alloy’s grain structure to prevent point-of-impact drift as the barrel heats up during sustained fire. All models have M4-type feed ramp to ensure reliable feeding in carbine and rifle configurations. M5Carbine – M4 contour and 14.5″ length let you build a lightweight, fast-handling carbine-length weapon, with mid-length gas system for greater reliability, a longer sight radius, and a longer handguard for more accessory mounting area. Chambered in 5.56mm NATO, with a 1-7″ twist, for best compatibility with military ammo. Includes a permanently attached A2-style flash hider to meet minimal length requirements for civilian ownership, plus barrel extension, barrel nut, bayonet lug, and front sling swivel under gas block. Machined from long-wearing chrome-moly-vanadium steel alloy and chrome lined for maximum bore life. Available with low-profile gas block/flip-up front sight or in USGI configuration with forged A2 gas block/sight tower, handguard slip ring, and handguard cap. Mid-Weight Stainless – Precision-cut, full-length flutes to give you the rigidity of a bull barrel with minimal added weight. “Shark gill” flash hider/muzzle brake tames felt recoil and virtually eliminates muzzle rise for fast follow-up shots. Available in 18″ length with low-profile aluminum gas block, or 20″ length with ultra-low-profile steel gas block. Includes barrel extension, barrel nut, and gas tube; free-float handguard required. Chambered in 5.56mm NATO, with a 1-8″ twist. Heavy Bench Target Stainless – Fluted, 24″ bull barrel chambered in .223 Remington, with rifle-length gas system and aluminum gas block with a 1-8″ twist. Muzzle has recessed, 11deg target crown to protect the rifling. SPECS: Chrome-moly-vanadium steel alloy (CM), matte black finish, or 410 stainless steel (SS), natural matte gray finish.
Dual, curved restrictor plates with a tremendous amount of surface area stop exiting barrel gases and pull the barrel forward to counteract recoil and muzzle flip. The front sight or scope stays right on target for a faster second shot, plus less felt recoil and shooter fatigue. Models available for rifles chambered in .223/5.56mm and .308/7.62mm. SPECS: Steel, blued, matte finish. 11⁄2″ (3.8cm) dia., 21⁄4″ (5.7cm) long. .223 – 5.3 oz. (149g) wt. Fits “-28 tpi muzzle threads. .281″ exit hole accommodates bores up to .243/6mm without modification; may be enlarged for bores up to .358″. .308 – 4.8 oz. (136g) wt. Fits 5⁄8″-24 tpi muzzle threads. .350″ exit hole may be enlarged to fit bores up to .416″.
Durable, steel springs provide extra hammer power to ensure proper ignition with each trigger pull. Replaces factory spring. SPECS: Steel. Approximately 23/32″ (18.2mm) wide, 2″ (5.1cm) long.
