Magpul Ar-15 300 Blk Pmag 30 Gen M3 Magazine

(4.0)

Buy Magpul Ar-15 300 Blk Pmag 30 Gen M3 Magazine

We found a great deal on the Magpul Ar-15 300 Blk Pmag 30 Gen M3 Magazine for only $12.99 at Brownells.

The PMAG 30 AR 300 B GEN M3 is a purpose-designed magazine for rifles chambered in .300 Blackout. Since its inception, .300 Blackout shooters have had to use a magazine designed for another cartridge, limiting its performance and compatibility. One of the nice features of .300 Blackout is the compatibility with 5.56x45mm parts, but with the magazine it is a compromise to do so. Due to the wide variety of projectile weights and shapes potentially decreasing overall reliability, a dedicated .300 Blackout magazine was a logical step for the PMAG line. In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your .300 BLK r Mfg: Magpul

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Brownells Ar-15 30rd Magazine Ss 223/5.56

(4.0)

Buy Brownells Ar-15 30rd Magazine Ss 223/5.56

We found a great deal on the Brownells Ar-15 30rd Magazine Ss 223/5.56 for only $10.49 at Brownells.

A battle rifle is only as reliable as its magazine make sure the one in your rifle is from Brownells. When the difference between a “bang” and a “click” is life and death, a magazine failure is more than inconvenient it can be fatal. So when we decided to build our own AR-15/M16 magazines, reliability was our first priority. Some of us have sons and daughters serving overseas or in law enforcement, and we aimed to build the kind of magazine we’d trust their lives with. We started with a clean slate, then worked out the bugs on the drawing board and the test range before we offered a single mag for sale, so you get a magazine of uncompromising Mfg: Brownells SPECS: Aluminum body, hard-anodized, dry-lube coating. Fiberglass-filled plastic follower. Available in stainless steel (SS) spring.30-round magazine capacities.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Magpul Ar-15 Str Stock Collapsible Commercial

(4.5)

Buy Magpul Ar-15 Str Stock Collapsible Commercial

We found a great deal on the Magpul Ar-15 Str Stock Collapsible Commercial for only $75.95 at Brownells.

An enhanced version of the Magpul CTR stock, the STR (“Storage/Type Restricted”) buttstock features two 4 1/4″ left- and right-side positioned battery storage tubes and a wider cheekweld for extra comfort. Rubber caps at the rear keep the storage compartments resistant to water incursion, yet pop off easily for access to two AA or two CR-123 batteries inside. Features two integral 1 1/4″ sling loops. Includes reversible QD swivel socket. Friction locking mechanism minimizes wobble between the buffer tube and the buttstock for a solid, secure “feel”, which is enhanced by the detachable .30″ thick rubber rubber that adds plent Mfg: Magpul SPECS: Reinforced nylon polymer, Black, Gray, or Foliage Green. 7 1/4″ (18.4cm) OAL, 5 1/4″ (13.3cm) high. LOP adjustment range: 3 1/4″ (8.3cm). 12.5 oz (354g) wt. Commercial Fits larger 1.17″ O.D. commercial carbine buffer tubes.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Blue Force Gear Ar-15/M16 Rail Mount Sling Loop

(4.0)

Buy Blue Force Gear Ar-15/M16 Rail Mount Sling Loop

We found a great deal on the Blue Force Gear Ar-15/M16 Rail Mount Sling Loop for only $33.99 at Brownells.

Low-profile sling loop clamps to Picatinny handguard rail and provides a secure, versatile forward mounting point for a 1″ sling. Precision machined from billet aluminum with rounded edges to prevent snagging on other gear. Fixed, non-pivoting design prevents rattles and unwanted sling shifting. Mfg: Blue Force Gear SPECS: Aluminum, hardcoat anodized, black. Stainless steel crossbolt, black oxide finish. 1 1/2″ (3.8cm) long. .6 oz. (17g) wt.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Troy Industries, Inc. Ar-15/M16 Sdmr Rails, Flat Dark Earth

(5.0)

Buy Troy Industries, Inc. Ar-15/M16 Sdmr Rails, Flat Dark Earth

We found a great deal on the Troy Industries, Inc. Ar-15/M16 Sdmr Rails, Flat Dark Earth for only $229.99 at Brownells.

Troy’s SDMR Rail installs quickly and easily. The streamlined one-piece design is exceptionally lightweight and sleek. With its series of keyholes, accessory mounting is simple and reliable: they can’t loosen or fall off. Machined from hardened aircraft aluminum with stainless steel components and finished in MIL-SPEC hardcoat anodizing. Mount on standard AR-15/M16 mil-spec barrel nut. Barrel nut not included. Mfg: Troy Industries, Inc. SPECS: Made from hardned aluminum with stainless steel components and finished in MIL-SPEC hard coat anodized. Mounts to standard AR-15/M16 mil-spec barrel nut (NOT INCLUDED).

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Dpms Ar-15 5.56 16″ Sportical Rifle Kit

(4.5)

Buy Dpms Ar-15 5.56 16

We found a great deal on the Dpms Ar-15 5.56 16″ Sportical Rifle Kit for only $499.99 at Brownells.

This kit provides everything you need to assemble a complete AR-15 except for the lower receiver and sights. Contains a complete upper receiver with 16″ carbine barrel chambered in 5.56 NATO, a DPMS Pardus stock, a single-rail Picatinny rail gas block for mounting the flip-up front sigh of your choice, and all of the internal parts necessary for your build, including bolt, carrier, pistol grips, handguard, A2-type flash suppressor, and fire control system. Sportical kit has a slick side upper receiver without ejection port cover or forward assist. Mfg: Dpms SPECS: Receiver Forged 7075 T6 aluminum, hardcoat anodized, matte black. .250″ diameter pivot/takedown pin holes. Barrel/Flash Suppressor Steel, matte black oxide finish. 16″ OAL. Chambered for 5.56mm NATO. 1-9″ rifling twist rate. 1/2″-28 tpi muzzle t

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Drd Tactical Ar-15 Takedown Barrel Nut

(4.5)

Buy Drd Tactical Ar-15  Takedown Barrel Nut

We found a great deal on the Drd Tactical Ar-15 Takedown Barrel Nut for only $39.99 at Brownells.

DRD Tactical proprietary barrel nut works with the DRD Tactical Quick Takedown Build Kit to allow for multiply barrels to be used. Simply use any barrel compatible with the .223/5.56 action, add gas block and gas tube, and the DRD barrel nut will give you the ability to swap barrels in seconds! Mfg: Drd Tactical SPECS: 416 Stainless Steel Heat Treated

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Vltor Weapon Systems Ar-15 Imod Stock Assy Collapsible Mil-Spec

(4.5)

Buy Vltor Weapon Systems Ar-15 Imod Stock Assy Collapsible Mil-Spec

We found a great deal on the Vltor Weapon Systems Ar-15 Imod Stock Assy Collapsible Mil-Spec for only $144.95 at Brownells.

Tactical stock system contains all the parts you need to replace an existing carbine or rifle stock with a highly versatile, five-position, carbine stock. The IMOD buttstock’s unique, “clubfoot” shape provides better overall control and firm, stable shoulder contact in combat situations. Removable, non-slip rubber buttpad angles slightly forward from heel to toe for a better hold in the “ready” stance and when the weapon is held above the shoulder pocket in the heads-up position. Snag-free design won’t hangup on clothing, web gear, or equipment. Two detachable storage compartments with waterproof caps hold up to four AA or six, CR-123 spare batteries. Two Mfg: Vltor Weapon Systems SPECS: Molded polymer, Black, Dark Earth, or Foliage Green. 7″ (17.8cm) to 95/8″ (24.5cm) l.o.p. Kit contains stock, mil-spec 1.15″ O.D. receiver extension, carbine buffer, buffer spring, endplate, locking Nut, and two detachable storage compartments with caps.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Double Star Ar-15 Stripped Ds4 Upper

(4.0)

Buy Double Star Ar-15 Stripped Ds4 Upper

We found a great deal on the Double Star Ar-15 Stripped Ds4 Upper for only $269.99 at Brownells.

Double Star Upper with 16″ DS-4 Barrel, ready to be your next build’s foundation. DS-4 barrel features a 1-9 twist, M4 feedramps and a matte black, phosphate finish. Barrel is chambered in 5.56x45mm NATO, and does not have chrome lining. Flat top upper receiver is ready for the attachment of Picatinny accessories and barrel. Carbine gas tube and barrel assembly are ready for your choice of handguard and muzzle device. Low profile gas block installs onto the barrels .750″ OD gas shoulder. Mfg: Double Star

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Present Arms Inc Ar-15 Trigger Puck

(4.0)

Buy Present Arms Inc Ar-15 Trigger Puck

We found a great deal on the Present Arms Inc Ar-15 Trigger Puck for only $60 at Brownells.

The trigger guard lips on the AR-15 lower are the weakest item on the receiver. When installing or removing the roll pin, they can easily be snapped or fractured. The Trigger Gunner’s Puck fits the circular cutout on the Gunner’s Mount. The Gunner’s Puck fits most mil-spec lower receivers, with cutouts for the bolt stop, safety/selector, magazine release, and magazine well. Trigger Gunner’s Puck will fit the circular cut on the Gunners Mount or is good for standalone use. Puck cut to have the lower receiver fit by way of the grip portion when grip removed, most Mil Spec lowers. It will accommodate the bolt stop. Safety/Selector Mfg: Present Arms Inc SPECS: Fits mil-spec AR-15 lower receivers.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,
Links