We found a great deal on the J P Enterprises Ar-15 Stainless Steel Bolt Carrier for only $199.99 at Brownells.

Custom, stainless steel bolt carrier features a 100% increase in bearing surface for smooth cycling and outstanding reliability. Includes forward assist serration and dust cover notch for tactical duty or any application requiring absolute “no-fail” operation. Expanded, exterior, bearing surfaces are hand polished and ensure precise alignment in upper receiver for less wear. Non-plated carrier bore is roller burnished for low-drag movement. Rear of carrier is designed in the AR-15, semi-auto configuration with longer, mil-spec cocking pad in the front. Five-step QPQ process produces an exceptionally hard, wear-resistant high-lubricity black finish. Comes with steel gas key installed. Mfg: J P Enterprises SPECS: 416 stainless steel, polished, black QPQ finish. Includes steel key. 9 oz. (255g).

Click Here to Buy Now

The Dpms Firearms Llc Ar-15/Ar-Style .308 Upper Receiver Block can be found at Brownells for $49.99, which is a pretty good price.

Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250″ diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers. Mfg: Dpms Firearms Llc SPECS: Nylon, white. AR-15 – 7″ (17.8cm) long, 1 3/4″ (4.5cm) wide, 2-7/8″ (7.3cm) high. DPMS .308 – 7-3/8″ (18.7cm) long, 1-7/8″ (4.8cm) wide, 3″ (7.6cm) high. Fits DPMS Panther AR-style .308 receivers.

Click Here to Buy Now

We found a great deal on the Mwg Ar-15/M16 90 Rounder~ Magazine for only $124 at Brownells.

Precision built, ultra-high capacity, drum-style magazine allows extended shooting strings and plenty of shooting fun with your favorite AR-15 or M16 rifle. Made from extra-strong polycarbonate resin with a clear back cover so you can see at a glance the remaining rounds. Holds a maximum of 90 rounds of .223 Rem./5.56 NATO ammunition and is guaranteed not to jam or malfunction. Offset design keeps the weight of all rounds directly below the magazine well, so the balance point of your rifle remains unchanged. Very easy to load, includes a 10-round loading chute and stripper clips to help speed reloads. Mfg: Mwg SPECS: Injection-molded synthetic nylon, black. 1lb. 4 oz (.56kg) wt. empty. Includes magazine, loading chute, plunger, (9) stripper clips, nylon spacer and instructions.

Click Here to Buy Now

Brownells has a great price on the Dpms Firearms Llc Ar-15 Round Handguards, at only $24.99.

Strong, comfortable-to-hold replacement for the older, triangular handguards. Raised ribs improve grasp for easier carry and firing. Constructed from mil-spec, thermo-set resin for improved strength and durability. Includes aluminum heat shield. Fits standard or delta slip ring. Mfg: Dpms Firearms Llc SPECS: Plastic resin, black. A-2 Long; 12″ (30.5cm) long. Fits AR-15 with 20″ barrel. AR-15 Short; 6 3/4″ (17.1cm) long. Fits CAR-15 with 11.5 or 16″ barrel.

Click Here to Buy Now

We found a great deal on the Glenair Ar-15/M16 Strap Wrench for only $32.99 at Brownells.

Easily grips all types and sizes of AR-15/M16 tube handguards, without damage, for faster, more precise installation and removal. Fiber reinforced rubber strap with steel handle gives plenty of leverage, plus it’s broached for attaching 3/8″ drive torque wrench. Mfg: Glenair SPECS: Nickel-plated aluminum handle, 6-3/8″ (16cm) long. Fits handguards up to 3″ (7.6cm) in diameter.

Click Here to Buy Now

Brownells has a great price on the Lancer Systems Ar-15/M16 L5 Polymer Magazines, at only $17.99.

Full-capacity, 20- and 30-round magazines feature a translucent polymer body with molded-in round-count markers to give the operator instant visual feedback on ammo status. Makes pre- and post-combat ammo checks easy; helps improve training safety and range efficiency. Tough, lightweight molded polymer stands up to rough handling and extreme conditions of tactical operations, including heat and impact of sustained full-auto fire. Tested to withstand temperature extremes of 50deg F to +180deg F and 5-foot drop, fully loaded, to hard concrete surface without impairment of function. Impervious to cleaning solvents, oils, and many other chemicals. Non-reflective exterior has molded-in Mfg: Lancer Systems SPECS: Molded polymer, translucent smoke gray. Fits AR-15/M16/M4 and clones chambered for .223/5.56mm. L5A also fits HK416, SA80, and Beretta ARX160

Click Here to Buy Now

The Brownells Brownells Diy Ar-15 Performance Upgrade Kit can be found at Brownells for $199.99, which is a pretty good price.

The Brownells DIY AR-15 Performance Upgrade Kit includes: Brownells AR-15 Compensator Brownells AR-15 Accu-Wedge Rock River Arms .154″ 2-Stage NM Trigger AR-15/M16 Receiver Action Block DPMS AR-15 Multi-Tool The accompanying video shows you how to install the Brownells Ar-15 Performance Upgrade Kit step by step.Download the Brownells DIY AR-15 Performance Upgrade Kit Instructions Mfg: Brownells

Click Here to Buy Now

Brownells has a pretty good price on the Tti Intl Ar-15/M16 Buffer Springs, for only $14.99.

Genuine, Mil-spec quality springs for the AR-15/M-16 that wear out, break, or just get lost. Great for creating your own emergency parts kits. Mfg: Tti Intl SPECS: Springs – steel, music wire or stainless steel wire. Parts sold 5 per pack.

Click Here to Buy Now

The Brownells Ar-15 Sight Wrench is only $17.99 at Brownells these days, which seems to be a pretty good price.

Precision machined from tough, stressproof steel with square-profile fingers that grip the sight notches firmly and won’t “roll out”; provides easy, exact sight adjustment. Plus, they resist bending and breaking to give years of service. Deeply drilled body fits both issue and tall blade sights. An extra-nice touch are the hex-shaped bodies; they’re easy to grasp, easy to turn and won’t roll off your bench. Three tools: A1 five-prong and A2 four-prong fit front and rear sights. A1/A2 is double ended to fit both five-detent A1 and four-detent, square blade, A2 front sights only. A2 wrenches also fit FN SCAR. Check out the video demonstration of the AR-15 Sight Wrench. Mfg: Brownells SPECS: Stressproof steel, blue finish. A1: five-prong and A2: four-prong (adjusts front and rear). 1-3/8″ (3.5cm) long x 3/4″ (19mm) dia. A1/A2: 2 1/2″ (6.4cm) long four-prong/five-prong front only wrench. A2 wrench is designed for the standard A-2 style front post

Click Here to Buy Now

The Brownells Drive Handle can be found at Brownells for $17.99, which is a pretty good price.

Use with AR-15/M16 Combination Wrench to loosen the barrel nut and remove barrel. Long enough to provide ample leverage. Mfg: Brownells SPECS: Chrome-plated steel. 10 1/2 (26.7cm) long. 13/16″ (20.6mm) diameter handle.

Click Here to Buy Now

The Wolff Ar15/M16 Trigger Function Pak can be found at Brownells for $6.99, which is a pretty good price.

Contains one reduced power trigger spring and one disconnector spring Designed to lighten and improve trigger function For use in AR15, M16, M4, & variants Mfg: Wolff

Click Here to Buy Now

We found a great deal on the Dpms Firearms Llc Ar-15 Repair Kit for only $29.99 at Brownells.

Absolutely the easiest way to keep genuine Mil-spec AR-15 replacement parts in your shop and available for your customers. AR-15 Repair kit contains one each: hammer spring, trigger spring, extractor, extractor return spring, firing pin, ejector pin, ejector, firing pin retaining pin, disconnector spring. Mfg: Dpms Firearms Llc SPECS: Steel and spring steel. Matte finish.

Click Here to Buy Now

The Cmmg Upper Complete M4le Carb 9mm 16″ Wasp is only $599.95 at Brownells these days, which seems to be a pretty good price.

9mm upper receiver Mil-spec A3 upper receiver 4140 W.A.S.P. barrel with 1:10 twist Ramped 9mm bolt uses standard AR 15 / M16 hammer Not for use with dedicated 9mm hammer F marked front sight base The Upper Complete M4LE Carbine 9mm 16-inch WASP is the right choice to convert your M4 carbine to a 9mm carbine. Since the upper is complete this is a snap on, snap off addition. It has a ramped 9mm bolt that uses standard AR15 / M16 hammer. Not for use with dedicated 9mm hammer. Uses existing fire control, just modify the magazine well to be shooting 9mm pistol ammunitions. Mfg: Cmmg SPECS: 9mm upper, Mil-spec A3 receiver, 4140 WASP barrel with 1:10 twist, Ramped 9mm bolt uses standard AR15/M16 hammer, Not for use with 9mm hammer, F marked front sight base

Click Here to Buy Now

We found a great deal on the Bat Machine Ar-15/M16/Ar-Style .308 Barrel Extension for only $30.99 at Brownells.

Machined 4140 chrome-moly steel barrel extensions help the custom rifle builder ensure a secure barrel fit for best alignment and accuracy. Heat treated for surface hardness to give years of reliable service. Choose from a standard AR-15 rifle extension or an M4 carbine extension with feed ramp cuts. The .002″ oversized AR-15 extension provides an extra-tight receiver fit that reduces vibration and improves accuracy, or solves the problem of a slightly loose, out of spec receiver. AR-Style .308 extension fits the DPMS LR-308 and other .308s with the same thread pattern, plus it offers M4-style feed ramp cuts to ensure extra reliability in getting rounds from the magazine to the chamber. Mfg: Bat Machine SPECS: 4140 chrome-moly steel, in-the-white. Standard AR-15 – 998″ O.D., .750″ I.D. No feed ramp cuts. Oversize AR-15 – 1.000″ O.D., .750″ I.D., with M4-type feed ramp cuts. M4 – 1.000″ O.D., .750″ I.D., with feed ramp cuts. AR-Style .308 -1.200″ O.D., .940″

Click Here to Buy Now

The Darrels Custom Firearms Ar-15/M16 Handguard Removal Tool can be found at Brownells for $24.99, which is a pretty good price.

Takes all the fumbling, grumbling and frustration out of installing or removing AR-15 handguards. Easy-to-use, just hook tool into mag well and push down on the handles. Pushes the delta ring straight down, allows both handguards to be removed in just seconds. Mfg: Darrels Custom Firearms SPECS: Steel, rubber handles, matte finish, black. 11 1/4″ (28.6cm) long. Fits AR-15 A1, A2, M-16 and AR-10.

Click Here to Buy Now

The Dpms Firearms Llc Ar-15/M16/Ar-Style .308 Lower Receiver Parts Kit can be found at Brownells for $85.99, which is a pretty good price.

All the internal parts you need to turn a stripped lower receiver into a fully functional bottom half, ready for assembly to the upper receiver and buttstock. Or, use to rebuild the worn internals of an old rifle and restore it to like-new function and reliability. Eliminates the hassle of scrounging up the parts one by one, plus single-manufacturer source means the kit parts are designed to work together and will require minimal fitting. Kit includes the complete fire-control system with trigger, trigger spring, disconnector, .153″ diameter hammer/trigger retaining pins, hammer spring, bolt stop, bolt stop screw, selector, selector detent, bolt catch, magazine catch, magazine release b Mfg: Dpms Firearms Llc SPECS: Steel, matte black finish. .223 Kit fits mil-spec .223/5.56mm semi-auto small-pin AR-15 lower receivers. .308 Kit fits DPMS LR-308 series lower receivers and compatible .308/7.62mm lowers, including Remington and Patriot Ordnance Factory.

Click Here to Buy Now

The Black Dog Machine Llc Ar-15/M16 50-Rd Drum Magazine For .22 Lr Conversions is only $69.99 at Brownells these days, which seems to be a pretty good price.

Dependable, super-capacity drum magazine lets you shoot extended 50-round strings for plenty of plinking fun with a semi- or full-auto .22 LR conversion. Same rugged polycarbonate construction as the Brownells/Black Dog .22 LR box magazine. Easy to disassemble for cleaning (instructions included). Mfg: Black Dog Machine Llc SPECS: Injection-molded polycarbonate, smoke. Fits AR-15/M16 with a CMMG .22 LR conversion kit or similar Atchisson-type conversion system. May require some fine tuning to ensure proper feeding in full-auto rifles.

Click Here to Buy Now

Brownells has a pretty good price on the Tactical Components, Llc. Tactical Stock Adapter For Remington 870, for only $34.54.

Impact-resistant, Tactical Stock Adapter provides a strong, lightweight coupler to attach pistol grips and CAR-15 style butt stocks to the popular, Remington 870 shotgun. 33% fiberglass-reinforced nylon provides superior strength with minimal weight increase; won’t warp, crack, or shrink in extreme weather conditions. Tight-tolerance, molding process ensures proper fit and virtually eliminates unsightly mold seams. Slight, 7deg angle drops the butt stock for an improved sight path with barrel-mounted sights. Allows 10″ to 13″ length-of-pull adjustment when used with a collapsible, “shorty” stock. Mfg: Tactical Components, Llc. SPECS: Fiberglass-reinforced nylon, matte black. 2 3/4″ (7cm) long, 1 1/2″ (3.8cm) wide, 3″ (7.6cm) high. Includes locking ring and grip hardware. 5 oz. (142g) wt. Fits Rem 870, 12 ga.

Click Here to Buy Now

The Brownells Ar-15/M16 Magazine Refurbish Kits is only $69.95 at Brownells these days, which seems to be a pretty good price.

The AR-15/M16 magazine refurbish kits allow you to restore old 20 and 30 round magazines Reliability is restored with the use of new chrome silicon springs and Mil-Std followers Old worn out floorplates are also replaced and give you the options of a dark parkerized gray that mimics original colors or a more modern coyote finish Please reference 080-000-744 magazine feed lip gauge. It will assist in ensuring old magazines are fully reliable Please reference 083-051-024 Gun-Kote Instructions Please reference 083-002-812 Alumahyde II Instructions Mfg: Brownells SPECS: Kit contains: .223 Mag Brush, 30-ROUND AR-15 Chrome Silicon Mag Spring, 10PK, 30-Round Mil-Std Follower, 10PK, AR-15 Magazine Floorplate, 10PK, 2 Gun Kote Gray Matte 6 oz Aerosol Cans, & 2 D-Solve Pump Spray 4 oz.

Click Here to Buy Now

The Smith Enterprise Ar-15/M16/Ar-Style .308 Armorers Wrench can be found at Brownells for $45.99, which is a pretty good price.

Extra-heavy duty armorers wrench provides easier installation and removal of all barrels up to 1 1/4″ diameter with either encapsulated or peg-style barrel nuts. Extra-long handle features smooth, contoured edges for comfortable use. Includes 1/2″ square drive opening for torque wrench application; 5/8″ and 3/4″ slots fit receiver extensions and A1/A2 flash suppressors .223 for AR-15/M16 applications, .308 for use with AR-Style .308 rifles. Mfg: Smith Enterprise SPECS: 17-4 stainless steel, black oxide finish. 12″ (30cm) long, 1″ (2.5cm) wide handle.

Click Here to Buy Now

The Smith Enterprise Ar-15m16/M4 Carry Handle Scope Mount can be found at Brownells for $66.95, which is a pretty good price.

Precision-machined aluminum scope mount attaches securely to the carry handle of your AR-15/M16/M4 to provide a solid, lightweight platform for tactical optics. MIL-STD 1913 rail cut accepts Picatinny, STANAG, and Weaver-style mounting systems, while hollow, .335″ diameter sight channel offers unobstructed use of standard-issue iron sights without removing mount. Locks tightly in place with hardened steel stud and knurled nut that also allow fast, easy removal and reattachment of mount and attached optics without loss of zero. Positions scope to provide adequate eye relief when wearing a protective chemical/biological mask. Standard issue for Israeli Defense Forces, and deployed with the U.S Mfg: Smith Enterprise SPECS: Machined 6061 T6 aluminum, hardcoat anodized, black, matte finish. 5-3/8″ (13.6cm) long. 2.5 oz. (71g) weight. Made in U.S.A.

Click Here to Buy Now

The Kengs Firearms Ar-Style Rifle Free Float Tube Adapter can be found at Brownells for $49.95, which is a pretty good price.

Provides secure mounting of Versa-Pod to any AR-15 style rifle with a tube-type free float forend with an Uncle Mike’s or similar design sling swivel stud. This adapter fits ArmaLite(R) T-Series rifles, Rock River Arms Varmint models, and similar rifles with stud positioned on underside of tube. Comes with a 360deg rotating quick-detach sling swivel that fits receptacles on both sides and bottom of mount. No gunsmithing required. Mfg: Kengs Firearms SPECS: Steel and hard, reinforced polymer composite, black finish.

Click Here to Buy Now

The Magpul Emag 10 Pack can be found at Brownells for $199.99, which is a pretty good price.

Lightweight molded polymer magazine combines features of Magpul’s popular PMAG with exterior dimensions engineered to meet NATO STANAG 4179 compatibility requirements. The EMAG (Export MAGazine) is fully compatible with all AR-15/M16 variants, HK 416, FN SCAR, SA-80, Beretta ARX-160, IMI Tavor, and other .223/5.56mm weapons that use AR-type mags. The crush-resistant, one-piece body of fiberglass-reinforced molded polymer has a slim, unribbed exterior that ensures it’ll fit in magazine pouches and couplers designed for USGI M16 magazines. The EMAG has the same sealed, constant-curve body and self-lubricating anti-tilt follower as the PMAG, and even accepts the PMAG Ranger Floorpla Mfg: Magpul SPECS: Molded polymer body and follower, stainless steel spring. Available in black only. 30-round capacity.

Click Here to Buy Now

Brownells has a pretty good price on the J P Enterprises Ar-15/Ar-Style .308 Adjustable Trigger System, for only $119.99.

Easy-to-fit replacement for factory trigger is fully adjustable for engagement and overtravel, and is available with pull weight as light as 3.5 lbs. Redesigned sear geometry and advanced metallurgy result in a precision-ground sear edge that delivers a precise, consistent letoff and prevents the kind of wear that causes doubling and other problems. Extremely short reset enables fast follow-up shots, a critical advantage on tactical and competition rifles. Machined to exceptionally tight tolerances from hardened steel, and installs in minutes with no permanent alterations to the rifle. Lets you upgrade an AR-15 or an AR-style .308 rifle that uses an AR-15 trigger, while keeping your current Mfg: J P Enterprises SPECS: Steel, Parkerized finish. Models for rifles with either .154″ (military and current aftermarket) or .169″ (current Colt) diameter trigger pins. Measure your pins and select the correct kit. Includes complete instructions and a CD-ROM with 35-minute video showing step-by-

Click Here to Buy Now

Brownells has a great price on the Blackhawk Industries Ar-15 Buttstock Magazine Pouch, at only $25.99.

Abrasion resistant, denier magazine pouch fastens snugly with two hook-and-loop straps to either the left- or right-hand side of fixed AR-15 buttstocks and holds either 20- or 30-round magazines for fast reloads. Two, steel D-rings provide sturdy sling points and elastic forward slip strap on the back of the pouch prevents slippage. Fully adjustable, flap holds magazine securely in place in all tactical and competition exercises. Also fits M4 collapsible stocks but must be removed to adjust stock length. Mfg: Blackhawk Industries SPECS: 1000 denier NyTaneon, black. Accepts 20- or 30-round AR-15/M16 type magazines.

Click Here to Buy Now

Brownells has a great price on the Smith Enterprise Ar-15/M16 G6-A2 Vortex Flash Hider, at only $52.99.

Specially angled flute hides nearly 100% muzzle flash, even during full-auto fire, by dissipating gas and retaining unburned powder for increased residual burn. Constructed of the same 8620 bar stock steel used in the manufacture of AR-15/M16 bolts and carriers, then heat-treated to provide a high-strength core and tough, outer shell. Special, helix design helps align exiting barrel gas to improve accuracy with all bullet types. Skirt extension conceals gap between barrel shoulder and flash hider on AR-15, M16, and M4 rifles. Grooved base ring allows integration of Blank Firing Attachment (BFA) used by law enforcement trainers, and permits installation of the Smith Enterprise M4DC CQB sound Mfg: Smith Enterprise SPECS: 8620 steel. Parkerized, black, matte finish. 1/2″-28 tpi. 2.31″ (5.9cm) long, .858″ (22mm) dia. 2.9 oz. (82 g) weight. Fits AR-15, M16, and M4.

Click Here to Buy Now

The Advanced Armament Accessory Mounting Rail is only $26.99 at Brownells these days, which seems to be a pretty good price.

Picatinny rail provides quick, secure mounting for accessory lights, vertical-foregrips and aerosol spray canisters. AR-15 – Bolts to existing handguard holes. Compatible with mil-spec handguards for M16A2 rifles and M4 carbines (including double heat-shield styles). Does not require alteration to handguard. Mini has a single cross slot for attaching one item. Extended add multiple accessory attachment points to carbines and rifles. HK UMP – mounts to existing hard-points cast into the sides and bottom of the receiver on UMP submachinegun and USC semi-autos. Mfg: Advanced Armament SPECS: Aluminum alloy, hardcoat anodized, black, matte finish. Supplied with all mounting hardware, tools, and installation instructions. AR-15 Mini and Extended fit standard carbine handguards with 6 vent holes and no heat shield, plus M-4 carbine with 7 vent holes and double heat shield. L

Click Here to Buy Now

Brownells has a pretty good price on the Impact Weapons Components Sling Mount-N-Slot, for only $32.95.

AR15 QUICK DETACH SLING MOUNT-N-SLOT Quick detach sling mount for MOE/ACR handguards Direct attach design eliminates 2 separate mount Accepts heavy duty or standard 360deg QD swivels Increases usable handguard spaceQD ROTATION LIMITED SLING MOUNT-N-SLOT FOR AR15 Rotation limitation allows proper sling placement Prevents sling wrap and twist Direct attach removes need for 2 mounts Accepts heavy duty or standard QD sling swivels For MOE/ACR handguardsSNAP HOOK SLING MOUNT-N-SLOT FOR AR15 8 position mounting capability Slot design prevents sling wrap up and twisting Prevents HK hook from accidental disconnect Accep Mfg: Impact Weapons Components Specs: CNC machined from 6061-T6 aluminum. Hard anodized type III matte finish. Includes instructions and wrench for installation.

Click Here to Buy Now

Brownells has a pretty good price on the Dpms Firearms Llc Ar-15/M16/M4/Ar-Style Stock Nut Wrench, for only $27.99.

No-fail armorer’s tool provides all the leverage you need to tighten and loosen carbine stock nuts. Dual-purpose wrench fits the later M4 receiver extension nuts with .185″ wide, slotted relief cuts, plus the additional slot fits the end of rifle buttstock receiver extensions. Includes a convenient hang-up hole drilled on the end for storage. Mfg: Dpms Firearms Llc SPECS: Tool steel, blue. 12″(30 cm) long, 1″(2.5cm) wide handle, 5/16″ (7.9mm) thick. Fits AR-15/CAR-15, M16/M4, and AR-Style .308 rifles.

Click Here to Buy Now

Brownells has a great price on the Aimtech Ar-15/M16 “second Sight” See-Thru Base, at only $23.5.

Lightweight, see-thru bases attach quickly to factory drilled and tapped receivers with no modifications to the factory sights required. Hollow base gives you full vision of factory, barrel-mounted sights for closer shots, or if your scope becomes damaged. Clearance cut ensures proper ejection. Accepts Weaver-style rings. AR-15 Short has Weaver-style rail. AR-15 Long is Picatinny configuration. Mfg: Aimtech SPECS: Aluminum, anodized, black, matte finish. Approx. 6″ (16cm) long, 1 oz. (28 g) wt. AR-15 bases fit carry handle receivers. AR15 Short: 4″ (10cm) long. AR-15 Long: 7-1/2″ (19cm) long. Includes screws, instructions.

Click Here to Buy Now

We found a great deal on the Magpul Mbus Gen 2 Front Sights for only $37.95 at Brownells.

New features include: reduced size, greater optics compatibility, and spring-locking front sight post MBUS is a low cost, folding back-up sight Front sight is adjustable for elevation Built in spring loaded front sight post detent Fits 1913 picatinny rail equipped weapons Specifically tailored for AR15/M16 platform Front sight adjustment tool included mounting hardware included Not compatible with railed gas blocks Available in: Black, Flat Dark Earth, OD Green, and Foliage Green Mfg: Magpul

Click Here to Buy Now

Brownells has a pretty good price on the Whidden Gunworks Ar-15/M16 Stinger Monopod, for only $134.99.

Compact, height adjustable monopod eliminates the need for cumbersome rear sandbags and provides a rock-solid rest for shot-to-shot consistency. Features a 4140 steel, adjustable leg that extends up to 4″ vertically for coarse elevation adjustments and a micro-adjustable foot for fine-tuning. Extra long, polycarbonate lever provides plenty of leverage to lock the monopod leg in position. Lightweight, 6061 aluminum buttplate is hardcoat anodized for durability. Large, horizontal serrations provide a non-slip grip against the shoulder. Fits fixed, mil-spec buttstocks on AR-15 and AR-10 rifles (A1 and A2 variants). Includes new bottom mounting screw. Requires use of original top mounting screw. Mfg: Whidden Gunworks SPECS: 6061 aluminum buttplate, 4140 steel leg and foot, polycarbonate lever, black, matte finish. 5-3/16″ (13.2cm) long, 1-5/8″ (4.1cm) wide, 5/8″ (1.6cm) thick. 10.2 oz. (289g) weight. Fits mil-spec fixed buttstock on AR-15 and AR-10 rifles (A1 and A2).

Click Here to Buy Now

Brownells has a great price on the J P Enterprises Ar-15/M16/Ar-Style .308 Enhanced Bolt Assembly, at only $109.99.

Complete bolt assembly is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon steel bolt, minimizing the risk of bolt failure during a critical engagement. SAE 9310 steel has a tough, ductile inner core highly resistant to stress fracturing, with a hard outer surface that resists galling and wear, to ensure a service life of up to 60,000 rounds. This is the same steel used in the transmission gears of Formula 1 race cars, so it’s ideal for high-impact, high-heat applications like sustained full-auto fire. Meticulously machined radiuses on all 90-degree corners on the locking lugs help distribute impact force evenly and further reduce Mfg: J P Enterprises SPECS: SAE 9310 nickel-chromium-molybdenum steel, in-the-white. Fully assembled with extractor, gas rings, ejector, pins, and springs installed. .223 fits AR-15/M16 and clones. Fully compatible with any mil-spec bolt carrier. .308 fits JP LRP-07 and DPMS LR-308 rifles only.

Click Here to Buy Now

The John Masen Ar-15 Raised Cheekpiece can be found at Brownells for $24.95, which is a pretty good price.

AR-15 Cheekpiece provides correct head position and eye alignment for scope sighted rifles. Clamps over A-1 and A-2 buttstocks, installs in minutes with no modifications to stock. Textured, matte-black surface blends well with stock. Soft rubber top section gives added comfort. Shorty Cheekpiece provides correct scope-to-eye alignment to AR-15 rifles with collapsible buttstock. Soft rubber cheekpad improves shooting comfort, gives 1 1/4″ additional height. Quick, snap-on installation. Mfg: John Masen SPECS: AR-15 Cheekpiece – Plastic, black. 6″ (15.2cm) long. Raises height of comb 1 1/4″ (3.2cm). Shorty Cheekpiece – Plastic, black. 5-3/4″ (14.6cm) long.

Click Here to Buy Now

The Brownells 25 30-Round Gray Ar-15/M16 Magazines W/Cs Spring can be found at Brownells for $249.99, which is a pretty good price.

A battle rifle is only as reliable as its magazine make sure the one in your rifle is from Brownells. When the difference between a “bang” and a “click” is life and death, a magazine failure is more than inconvenient it can be fatal. So when we decided to build our own AR-15/M16 magazines, reliability was our first priority. Some of us have sons and daughters serving overseas or in law enforcement, and we aimed to build the kind of magazine we’d trust their lives with. We started with a clean slate, then worked out the bugs on the drawing board and the test range before we offered a single mag for sale, so you get a magazine of uncompromising qua Mfg: Brownells SPECS: Aluminum body, MIL-STD hard-anodized, dry-lube coating. Chrome silicon spring. MIL-STD plastic follower.

Click Here to Buy Now

The Eotech Holographic Sight & Magnifier Combo is only $935 at Brownells these days, which seems to be a pretty good price.

Money-saving kit combines EOTech’s combat-proven Model 557 holographic weapon sight, 3x Magnifier, and quick-release Flip-To-Side (FTS) mount to produce a highly versatile short- and long-range sighting system for your flattop AR-15. Model 557 sight employs a ballistic matched reticle calibrated for the M4 carbine, with four vertically aligned 1 MOA aiming dots for target distances of 0-300m, 400m, 500m, and 600m. Flush-mounted control buttons on left side ensure easy, fast access with Magnifier installed. Front one-third of the base underside is elevated .275″ (7mm) for clearance over delta ring and standard military-style plastic handguard; lets you mount the 557 far enough forw Mfg: Eotech SPECS: 557 Aluminum & polycarbonate, matte, black. 5 3/4″ (14.6cm) long, 2-1/8″ wide, 2 3/4″ high. 12.3 oz. (349g) weight. Lens – 3/16″ thick, 3-layer, shatterproof laminate glass. Reticle – four vertically aligned 1 MOA dots. Requires two (2) 1.

Click Here to Buy Now

Brownells has a great price on the Magpul Ar-15/M16 Emag, at only $22.99.

Lightweight molded polymer magazine combines features of Magpul’s popular PMAG with exterior dimensions engineered to meet NATO STANAG 4179 compatibility requirements. The EMAG (Export MAGazine) is fully compatible with all AR-15/M16 variants, HK 416, FN SCAR, SA-80, Beretta ARX-160, IMI Tavor, and other .223/5.56mm weapons that use AR-type mags. The crush-resistant, one-piece body of fiberglass-reinforced molded polymer has a slim, unribbed exterior that ensures it’ll fit in magazine pouches and couplers designed for USGI M16 magazines. The EMAG has the same sealed, constant-curve body and self-lubricating anti-tilt follower as the PMAG, and even accepts the PMAG Ranger Floorpla Mfg: Magpul SPECS: Molded polymer body and follower, stainless steel spring. Available in black only. 30-round capacity.

Click Here to Buy Now

We found a great deal on the Falcon Industries Ar-15 Vertical Forend Grip for only $75.99 at Brownells.

Gives AR-15 rifles a forward hand hold that improves weapon retention and recoil control. Attaches quickly to a Weaver-style or Picatinny, handguard accessory rail. Single-screw attaching clamp provides fast on/off for storage or deployment. ERGO – Easy-to-grasp, pebble grain texture provides comfortable, hand filling control. Broomhandle – Rubber-covered grip has a ribbed, non-slip surface. Waterproof storage compartment lets you carry spare batteries for sights and night vision devices. Select from Straight or Angled 11deg to the rear. Attaches to Weaver-style accessory rail. Handguard model mounts directly to rifle or carbine handguard vent holes. Mfg: Falcon Industries SPECS: Steel mount; high impact polyurethane grip. Black. 4 1/2″ (11.4cm) long. Broomhandle is 1 1/2″ (3.8cm) in diameter.

Click Here to Buy Now

Brownells has a great price on the Tti Intl Ar-15/M16 Bolt Gas Rings, 5 Sets Of 3, at only $7.99.

Genuine, Mil-spec quality small parts for the AR-15/M-16 that wear out, break, or just get lost. Great for creating your own emergency parts kits. Mfg: Tti Intl SPECS: Parts sold 5 per pack.

Click Here to Buy Now

Brownells has a pretty good price on the Jard Ar-15 Non-Adjustable Trigger Kit, for only $148.99.

Easy to install, non-adjustable, AR-15 trigger replaces the heavy, gritty-feeling, factory hammer and trigger for a smooth, clean-breaking pull that’s sure to improve accuracy. Unique, single-stage design positions the sear engagement point behind the hammer for added leverage and a dependable, 3-pound pull weight. High-performance, low mass hammer reduces lock time. Precision-cut engagement surfaces are heat-treated for low wear. Requires gunsmith fitting in receivers with a sear block. Mfg: Jard SPECS: Steel, black matte finish. Includes hammer, hammer spring, trigger and trigger spring. Non-adjustable, 3 lb. (1.4 kg) pull weight. Available for rifles with .154″ or .171″ hammer and trigger pins.

Click Here to Buy Now

The Bob Hahin Ar-15/M16 Original Bob Sled is only $41.67 at Brownells these days, which seems to be a pretty good price.

Self-lubricating, Delrin(R) loading block replaces the magazine and follower for smooth, single round loading. Bolt holds open after every shot. CNC-machined loading tray ensures proper cartridge alignment and reliable feeding. OBS10 provides a short, match-length loading block. OBS20 is the same size and shape as a 20-round AR-15 magazine; approved for Service Rifle competitions. Mfg: Bob Hahin SPECS: Delrin. OBS10 – Approx. 2 1/2″ (6.4cm) long, 7/8″ (2.2cm) wide, 3″ (7.6cm) high. OBS20 – Approx. 2 1/2″ long, 7/8″ wide, 5″ (12.7cm) high. Fits AR-15/M16, .223 cal.

Click Here to Buy Now

The Maglula Ltd. Ar-15/M16 Striplula is only $34.99 at Brownells these days, which seems to be a pretty good price.

Thumb-saving, lightweight magazine loader provides fast, painless 30-round magazine loading in less than 13 seconds. Accepts 10-round stripper clips or loose rounds for easy loading of 10-, 20-, and 30-round magazines, and is capable of unloading a 30-round magazine in 15 seconds. Ambidextrous, grooved thumb slide provides a non-slip grip for right- or left-hand loading. Constructed of durable, reinforced polymer for dependable operation under extreme field conditions. Fits all AR-15/M16 metal and plastic magazines. Mfg: Maglula Ltd. SPECS: Polymer, black. 5-15/16″ (13.5cm) long, 1-1/8″ (2.8cm) wide, 1-3/16″ (3cm) high. 1.2 oz. (34g) weight. Accepts 10-round stripper clips or loose rounds. Fits all AR-15/M16 magazines.

Click Here to Buy Now

The Specter Gear Ar-15/M16 Two-Point Tactical Sling can be found at Brownells for $34.99, which is a pretty good price.

Wrap-around nylon-webbing sling secures to the side of an AR-15/M16 with a fixed rifle buttstock for enhanced freedom of movement without tangles or twisting. Allows the weapon to hang in a vertical orientation when carried in the “Military Patrol Ready” position. Features a quick-release buckle for emergency disengagement that lets you instantly move into an unconventional shooting position without removing the body loop. Spring loaded, self-locking rapid-adjust buckle has an easy-to-grasp paracord pull for fast, one-handed sling length changes. Hook-and-loop straps provide a tight hold around buttstock and forend, using the USGI front sling swivel on the gas block for added security. Compo Mfg: Specter Gear SPECS: Nylon webbing, polycarbonate clasp. Steel adjustment buckle. 3/4″ (1.9cm) wide forearm strap, 1 1/2″ (3.8cm) wide shoulder strap. Adjusts from 40″ (102cm) to 63″ (160cm) OAL. Fits all AR-15/M16 variants with a fixed rifle buttstock, round or triangular handguard

Click Here to Buy Now

The Brownells 5.56mm Ammo, Mags, And Loader is only $269.99 at Brownells these days, which seems to be a pretty good price.

FEATURES: 5.56x45mm 62 grain full metal jacket 420 rounds loaded on 10 round stripper clips Lake City green tipped ammunition Brass cased, boxer primed, non-corrosive XM855 bullet, same as current U.S. military issue Stripper clip guide is included Packaged in .30 caliber ammunition can Can weight: 16 lbs 10 or 6 Brownells AR15/M16 magazines Optional AR15/M16 Striplula SS109 steel penetrator coreBENEFITS: Lake City ammunition loaded to military specifications Loaded on 10 round stripper clips for easy loading and transport Packaged in .30 caliber ammo can so that ammo can be easily stacked, stored, and carri Mfg: Brownells

Click Here to Buy Now

Brownells has a great price on the Vltor Weapon Systems Ar-15/M16 Modular Upper Receiver, at only $229.95.

The MUR is a flattop upper receiver with thicker walls than a standard upper to provide a more rigid platform for greater stability, better accuracy, longer service life, and improved reliability. Precision machined from a fully heat-treated and cryogenically stress-relieved aluminum forging, before hand finishing to final dimensions. All critical interface points are 100% compatible with mil-spec select-fire AR-15/M16/M4 components and lower receivers, and will fit most commercial semi-auto lowers. A slick, dry-lube coating over the hard-anodized finish further guards against surface wear and helps ensure smooth operation of bolt/carrier and other internal components. Comes with true MIL-ST Mfg: Vltor Weapon Systems SPECS: 7075 T6 aluminum, Type II, Class 3 hardcoat anodized, dry lube coating, matte black. .250″ dia. pivot/takedown pin holes.

Click Here to Buy Now

Brownells has a great price on the Daniel Defense Ar-15/M16 Omega Rail/X Rail, at only $293.

Free-float handguard with four MIL-STD 1913 Picatinny rails installs in minutes with no permanent modifications to weapon. Two-piece design allows installation using basic tools and the included hex key. Tighten the four Allen-head screws against the barrel nut with the hex key to eliminate movement and align the extended top rail with the receiver rail for an exceptionally long expanse of uninterrupted accessory mounting space. Plenty of ventilation cuts keep barrel cool and minimize weight-perfect for tactical rifles where every ounce saved improves speed and maneuverability. Rail slots are indexed with white letters and numbers for precise positioning and remounting of accessories. Mfg: Daniel Defense SPECS: 6061 T6 aluminum, hardcoat anodized, Matte Black or Flat Dark Earth (7.0 only). Includes mounting screws, ladder-style rail covers, and instructions. 7.0 – 63/8″ (16.2cm) long. Top Rail – 7″ (17.8cm) long. 7.6 oz. (217g) wt. Fits AR-15 with carbine-length gas system. 9.0

Click Here to Buy Now

The Magpul Mbus Gen 2 Rear Sights is only $55.05 at Brownells these days, which seems to be a pretty good price.

New features include: reduced size, greater optics compatibility, and no aperture window sight option MBUS is a low cost, folding backup sight Dual aperture is adjustable for windage Fits all 1913 picatinny rail equipped weapons specifically tailored to the AR15/M16 platform All mounting hardware included Available in: Black, Flat Dark Earth, OD Green, and Foliage Green Mfg: Magpul

Click Here to Buy Now

Brownells has a pretty good price on the Midwest Industries, Inc. Ar-15/M16/Ar-10 Folding Front Sighttower, for only $159.95.

Low-profile, steel gas block with integral aluminum flip-up front sight adds minimal weight and bulk to your rifle. Easy bolt-on design for simple installation; three hardened steel hex-head bolts clamp gas block to barrel. Dual ball-and-detent system locks sight tower securely in folded and deployed positions. Standard A2 front sight post adjusts for elevation. Gas block/base with bayonet lug is precision machined from 4140 steel, with manganese phosphate parkerized finish for added strength and wear resistance. Sight tower is machined from 6061 T6 aluminum and hardcoat anodized a matching dark gray. MI-FST fits AR-15/M16 with .750″ O.D. barrel. Deployed height is the same as F-marked Mfg: Midwest Industries, Inc. SPECS: Base 4140 steel, Parkerized, dark gray finish. Sight Tower 6061 T6 aluminum, hardcoat anodized, matte black. MI-FST 23/16″ (5.6cm) overall length, 7/8″ (2.2cm) wide, 35/8″ (9.2cm) high with sight tower extended, 27/16″ (6.2cm

Click Here to Buy Now

Brownells has a great price on the Smith Enterprise Ar-15/Ar-10 Steel Extender/Riser, at only $189.

Machined from steel barstock to true 1913 Picatinny specifications. Full-length clamp bar and two 1/2″ clamp nuts provide excellent return to zero; lets you quickly interchange pre-zeroed day and night optics. 2″ forward extension, plus 1/2″ extra height provides clearance and support for large objective scopes and night vision devices. Super strong, recoil proof strength provides for various applications. Keeps heavy optical devices from shifting on tactical and .50BMG rifles. Attaches to any mount or AR-15 upper receiver that features Picatinny slot spacing. Mfg: Smith Enterprise SPECS: 4140 steel, black matte finish. 7″ (17.7cm) long. (14.7 oz. 417 g) wt.

Click Here to Buy Now

The Brownells Ar-15/M16 Flattop Riser can be found at Brownells for $44.99, which is a pretty good price.

Machined aluminum riser clamps to flattop AR-15 receiver to position primary optic sights at eye level. Raises mounting height .750″ to eliminate the need for extra-high rings in most applications. True, MIL-STD 1913 Picatinny cut accepts both Picatinny and Weaver-style rings. Two, easy-to-grip, slotted hex nuts accept a U.S. quarter for extra tightening leverage; full-length clamping bar locks riser securely to flattop receiver for zero movement even during harsh tactical operations. Precision CNC machined to ensure an exceptionally secure lock on the receiver rail. Smooth, curved front and rear contours on the underside provide a streamlined appearance, reduce weight, and minimize the ch Mfg: Brownells SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5″ (12.7cm) long, 1″ (2.5cm) wide at the base, .975″ (2.45cm) high overall. Adds .75″ (1.9cm) to height of flattop. 4.8 oz. (136 g) weight.

Click Here to Buy Now