Archive

Archive for April, 2019

Lancer Systems Ar-15 30rd L5awm Opaque Black Magazine 223/5.56

(4.5)

Buy Lancer Systems Ar-15 30rd L5awm Opaque Black Magazine 223/5.56

We found a great deal on the Lancer Systems Ar-15 30rd L5awm Opaque Black Magazine 223/5.56 for only $15.59 at Brownells.

Advanced Warfighter Magazines (AWM) fill the gap between the current metal and polymer magazine designs. These lightweight molded polymer magazines stand up to rough handling and extreme conditions of tactical operations, including heat and impact of sustained full-auto fire. Permanently attached, wrap-around feed lips are made from a single piece of precision formed, hardened steel that is PTFE coated for corrosion resistance. They help promote smooth ammo movement and will not deform when the magazine is stored fully loaded over a long period of time. Tested to withstand temperature extremes of -50 degrees F to +180 degrees F and a 5 foot drop fully loaded, onto concrete without impairm Mfg: Lancer Systems

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Plastix Plus Llc Ar-15/M16 Display Stands

(4.0)

Buy Plastix Plus Llc Ar-15/M16 Display Stands

We found a great deal on the Plastix Plus Llc Ar-15/M16 Display Stands for only $34.49 at Brownells.

High-density, thermoplastic-welded polyethylene stands securely hold your AR-15 for display or cleaning and maintenance chores. Each stand has a 7″ post with beveled edges that fits in the magwell like a magazine. Barrel Support model features a wide display stand with enclosed tray and a barrel support at one end. Parts Tray model has a centered resting post and no barrel support with plenty of room in the tray to keep small parts from straying. Wall-Mount model keeps your weapon off the ground and includes a holder for one magazine. Mfg: Plastix Plus Llc SPECS: High-density, thermoplastic-welded polyethylene, black. Barrel Support/Parts Tray 18″ (45.7cm) long, 6 1/2″ (16.5cm) wide, 7 1/4″ (18.4cm) high. Wall-Mount 7 1/4″ (18.4cm) long, 4 1/2″ (11.4cm) wide, 6″ (15.2cm) high.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Battle Arms Development Inc. Ar-15 Bad-15 Forged Lower Receiver

(4.0)

Buy Battle Arms Development Inc. Ar-15 Bad-15 Forged Lower Receiver

We found a great deal on the Battle Arms Development Inc. Ar-15 Bad-15 Forged Lower Receiver for only $198.55 at Brownells.

Forged aluminum lower accepts all standard AR-15 parts and is upgraded with special machining operations after forging. Magazine well is precision wire EDM cut to give smooth inner surface with precise tolerances for optimum function. Mag well opening is beveled to ease mag insertion and removal. Holes in the receiver are precision reamed, not drilled, for smoothness and concentricity, and receiver extension threads are cut with precision helical threading for perfect alignment and smooth installation and removal of buffer tubes. Laser engraving on the side is cut extra deep, giving the lower a custom appearance. Receiver is compatible with standard, 90deg safety selectors as well as Ba Mfg: Battle Arms Development Inc. SPECS: Forged 7075 aluminum, hardcoat anodized, matte black finish. FFL required for purchase.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Dead On Arms, Llc Ar-15 Pin-Less Ejection Port Cover Assemblies

(4.5)

Buy Dead On Arms, Llc Ar-15 Pin-Less Ejection Port Cover Assemblies

We found a great deal on the Dead On Arms, Llc Ar-15 Pin-Less Ejection Port Cover Assemblies for only $17.99 at Brownells.

Dead on Arms offers this creative solution for the often times frustrating job of installing the ejection port cover assembly. By doing away with the loose pin, spring and c-clip and replacing them with spring-loaded, captured plungers that allow you to simply snap the assembly in place without need of tools. The cover is made from manganese phosphate coated cold rolled steel, the pins are made from 416 stainless steel and the springs are made from 302 stainless steel. This is a drop-in replacement for standard ejection port covers. Mfg: Dead On Arms, Llc

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Radical Firearms Ar-15 Gas Tube Stainless Steel

(5.0)

Buy Radical Firearms Ar-15 Gas Tube Stainless Steel

We found a great deal on the Radical Firearms Ar-15 Gas Tube Stainless Steel for only $11.88 at Brownells.

If you’re building an AR-15, or sourcing parts for replacement or upgrade, a quality gas tube from Radical Firearms is a great option. Select your gas tube based on the location of the gas port on your barrel. For instance, most 16″ AR-15 barrels have a carbine-length gas port, and will be sold as a “carbine” barrel. However, if your barrel is sold as a “mid-length” barrel, you will need a mid-length gas tube. Mfg: Radical Firearms

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Troy Industries, Inc. Ar-15/M16 Sdmr Rails, Black

(4.0)

Buy Troy Industries, Inc. Ar-15/M16 Sdmr Rails, Black

We found a great deal on the Troy Industries, Inc. Ar-15/M16 Sdmr Rails, Black for only $229.99 at Brownells.

Troy’s SDMR Rail installs quickly and easily. The streamlined one-piece design is exceptionally lightweight and sleek. With its series of keyholes, accessory mounting is simple and reliable: they can’t loosen or fall off. Machined from hardened aircraft aluminum with stainless steel components and finished in MIL-SPEC hardcoat anodizing. Mfg: Troy Industries, Inc. SPECS: Made from hardned aluminum with stainless steel components and finished in MIL-SPEC hard coat anodized.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Dreamplastics Ar-15/M16 Pmag Magazine Coupler

(5.0)

Buy Dreamplastics Ar-15/M16 Pmag Magazine Coupler

We found a great deal on the Dreamplastics Ar-15/M16 Pmag Magazine Coupler for only $16.99 at Brownells.

Durable, corrosion-, weather- and impact-resistant reinforced nylon coupler lets you carry two 30-round mags on your weapon for super-fast reloads. Securely clamps the backup magazine to the one in the gun for fast access. Steel cross-bolt provides plenty of tensioning force for a secure, rattle-free grasp of both mag bodies. Deep surface ribbing gives you a solid, non-slip purchase, while rounded outside edges resist snagging on clothes and other gear. Installs in seconds with a standard slot-head screwdriver; no permanent alterations to magazines. Models available to fit four popular 30-round magazines: Magpul PMAG and GEN M3 PMAG. Mfg: Dreamplastics SPECS: Glass-reinforced nylon polymer, black, with steel hardware. PMAG Fits only Generation II PMAGs manufactured after July 2009 (see date stamp on mag body) with four exterior ribs and green follower. GEN M3 PMAG coupler fits only third generation Magpul PMAGs.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Hogue Ar-15 Overmolded? Forend, Tan

(4.0)

Buy Hogue Ar-15 Overmolded? Forend, Tan

We found a great deal on the Hogue Ar-15 Overmolded? Forend, Tan for only $89.99 at Brownells.

Machined aluminum free-float forends provides an exceptionally positive, non-slip gripping surface for the support hand to help ensure maximum weapon control. Easy-to-install, two-piece free-float design eliminates handguard stress on the barrel that can compromise accuracy. Use with rifle’s factory gas tube; if changing barrel length, purchase replacement gas tube of appropriate length. Mfg: Hogue SPECS: Forend Aluminum, hardcoat anodized, matte black, with synthetic rubber covering on Overmolded models. Fits AR-15/M16 and clones with rifle-length gas system.Pistol Grip Molded synthetic rubber exterior over fiberglass core, black.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Tangodown Ar-15 Bg-16 Rifle Grip

(4.0)

Buy Tangodown Ar-15 Bg-16 Rifle Grip

We found a great deal on the Tangodown Ar-15 Bg-16 Rifle Grip for only $36.99 at Brownells.

Unique, storage grip features internal cavities for two Aimpoint-type power cells, plus two AA or 123 lithium batteries, or your choice of other small spare parts or supplies. Anti-rattle foam spacers keep everything quiet. Flexible cap includes integral seals to protect contents from dirt and moisture. Curved backstrap is shaped to fill and support the hand and provides the correct finger-to-trigger position; aggressive grip texture ensures positive hold. Includes stainless steel, Dry-Lok attaching screw and installation tool. Mfg: Tangodown SPECS: Resin-impregnated polymer, black, dark earth, or foliage green. 4-1/8″(10.5cm) high. Fits rifles that accept standard AR-15/M16 grips.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Brownells Ar-15 Gen 3 Folding Stock Adapter W/Pistol Receiver Extension

(4.5)

Buy Brownells Ar-15 Gen 3 Folding Stock Adapter W/Pistol Receiver Extension

We found a great deal on the Brownells Ar-15 Gen 3 Folding Stock Adapter W/Pistol Receiver Extension for only $327.98 at Brownells.

Law Tactical’s steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter secure Mfg: Brownells SPECS: Adapter-Machined 4140 steel, DLC finish, matte black. Adds 1.3″ (3.4cm) to length of pull. 8.5 oz. (241g) wt. Do not fire rifle with stock folded. Extension Kit- Made in the USA and manufactured from high quality 7075 T6 aluminum.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,
Links