Low-profile ambidextrous mount replaces the factory receiver end plate to allow easy attachment of a QD sling swivel to the rear of the receiver. Won’t interfere with access to weapon’s controls, and won’t snag on foliage, vehicle, or other gear. Made of steel to allow proper staking of buffer tube lock nut on the lower receiver. Compatible with mil-spec lower receivers with M4-style collapsible stocks. Lets collapsible stocks collapse fully. Mfg: Noveske Rifleworks Llc SPECS: Steel, Parkerized, dark gray finish. Fits AR-15/M16with M4-type collapsible stock.
Custom barrel nut and jam nut wrenches are specifically designed to make installing Midwest Industries handguards fast and easy. Both wrenches transmit maximum torque smoothly and evenly to the nut without slipping and marring the gun. Long, easy-to-grasp plate steel handles provide plenty of leverage. Also fits standard handguards and most standard pin-type barrel nuts, too. Mfg: Midwest Industries, Inc. SPECS: Steel, black oxide finish. Approximately 77/8″ (20cm) long x 1/4″ (6.4mm) thick.
TacStar’s new AR-15 Adjustable Match Rifle Stock offers a full range of adjustments and features that can give any AR-15 (with A2 tube) a precisely adjustable match-grade buttstock. Both comb height and length of pull can be adjusted to provide a match-grade, custom fit for any shooter. Built with the TacStar quality that shooters rely on, the AR-15 ARMS also carries other important features like a hidden Picatinny rail for a stabilizing monopod. In addition, there are several sling mounting points including ports for push button quick release swivels (swivels not included) and fixed sling loops. The AR-15 ARMS is the easiest, most practical final upgrade for any AR. Mfg: Lyman SPECS: Fits – AR15/M16 rifles with rifle receiver extension (A1 or A2).
Semi-auto lower receiver is machined from a 7075 T6 aluminum forging to mil-spec dimensions for precise fit and outstanding performance. Ruggedized hardcoat anodized finish resists scuffs, scratches, and wear. Stamped and color-coded bullet selector position markings notify operator when weapon is in “safe” or “semi-auto.” A “full-auto” position is not selectable but gives this semi-auto lower receiver the appearance of being multi-burst capable. Magazine well features Spike’s spider logo and multi-cal engraving. Complete Lower w/Buttstock includes stainless steel trigger, black oxide finished trigger guard and hammer assembly, pistol grip, six-po Mfg: Spikes Tactical SPECS: Receiver – 7075 T6 aluminum, hardcoat anodized, matte black finish. Buttstock Reinforced molded polymer, black. “Cal Multi” stamped on side of magazine well. .154″ hammer/trigger pin holes. .250″ takedown/pivot pin holes.
Semi-auto lower receiver is machined from a 7075 T6 aluminum forging to mil-spec dimensions for precise fit and outstanding performance. Ruggedized hardcoat anodized finish resists scuffs, scratches, and wear. Stamped and color-coded bullet selector position markings notify operator when weapon is in “safe” or “semi-auto.” A “full-auto” position is not selectable but gives this semi-auto lower receiver the appearance of being multi-burst capable. Magazine well features Spike’s spider logo and multi-cal engraving. Stripped Lower comes as a standalone component without trigger group, mag release, selector, or bolt release. Mfg: Spikes Tactical SPECS: Receiver – 7075 T6 aluminum, hardcoat anodized, matte black finish. Buttstock Reinforced molded polymer, black. “Cal Multi” stamped on side of magazine well. .154″ hammer/trigger pin holes. .250″ takedown/pivot pin holes.
Bolt-on Picatinny rails give you almost unlimited accessory mounting options for your Yankee Hill Customizable Free-Float Tube or Customizable Two-Piece Handguard. Choose only as much rail as you need to avoid cluttering handguard with unused rail space. 6″ rail is a full-length rail for Carbine-length handguards, 9 1/4″ rail is the correct length for Specter tubes, and 12″ rail is full-length for Rifle tubes. Mfg: Yankee Hill Machine Co., Inc. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Fits Yankee Hill Customizable Free-Float and Two-Piece Handguards. Mounting screws included.
The Angstadt Arms 0940 stripped upper receiver is a dedicated AR-15 pistol caliber upper receiver assembly. Featuring an appropriately sized ejection port, the 0940 upper will work with 9mm, 40 S&W, .357 SIG, 45acp and 10mm pistol caliber builds. Compatible with 9mm, 40 S&W, 357 SIG, 45acp and 10mm Machined from 7075-T6 billet aluminum with a matte black hard-coat anodized finish Slick side upper receiver with pistol caliber sized ejection port and no forward assist or dust cover door Works with any mil-spec lower receiver Upper weight: 6.5 oz The Angstadt Arms 0940 stripped upper receiver is compatible with any 9mm lower receiver and all mil- Mfg: Angstadt Arms, Llc
Precision CNC Billet 8620 Heat Treated Steel (not cast or MIM) Oversize Control Surfaces for Easy Engagement Lightweight but Robust Design (0.42oz-Same as Milspec Bolt Catch with smaller control surfaces) Raised “T-Shaped” Heel provides positive and distintive control surface for bolt lock back Compatible with Norgon Ambi-Catch without interference Elegant Tapered Control Surface and Skeletonized Design Bold Horizontal and Diagonal Serrations Provides Positive Purchase Versatile, Modular Design for Futuer Add-On Products Black Oxide Finish Mfg: Battle Arms Development Inc.
