Single-stage trigger drops in to standard AR-15 lower receivers and gives a short, light pull with rapid reset. Makes follow-up shots easy. Reduces trigger pull to as little as 3-1/4 lbs. Designed as a semi-auto-only derivative of the two-stage Super Select Fire combat trigger made for the Special Operations community. Uses standard hammer and trigger pins. Not recommended for duty use, bench rest or accuracy work. Mfg: Geissele Automatics Llc SPECS: Steel, black finish. Fits semi-auto AR-15/M16 receivers with .154″ hammer and trigger pin holes. Includes trigger, tRigger pin, 2 trigger springs, hammer, hammer pin, hammer spring, slave pin for trigger, disconnector & spring, lubricant, instructions.
Bolt-on hardware lets you maximize accessory mounting options while adding minimal weight and bulk. Heavy duty, quick-detach sling swivel accepts slings up to 1 1/4″ wide, and limits travel to prevent sling wrapping while still allowing necessary movement. Mfg: Midwest Industries, Inc. SPECS: Swivel – Steel loop, black oxide finish. Accepts slings up to 1 1/4″ (3.2cm) wide. Base is 2 1/4″ (5.7cm) long x 5/8″ (1.6cm) wide. 1.5 oz. (43g) wt. Fits SS Series handguards only. Mounting hardware included.
Flip-up sights deploy with the flick of a finger to provide instant back-up, so you stay in the fight if your optic or laser sight fails. Super-smooth pivot mechanism with sturdy ball-bearing detent locks positively in the raised position and stays locked until you hit the pushbutton release. Sight folds down neatly out of your sight path when not in use. Machined from high-quality 6061 T6 aluminum and hardcoat anodized for increased wear-resistance. Hex wrench included with all models for easy installation. Front sights are designed to work with Midwest Industries flip-up rear sights, all models have standard A2 front sight post and clamp directly to Picatinny rails. MCTAR-FFR mounts on Mfg: Midwest Industries, Inc. SPECS: Aluminum, hardcoat anodized, Black or Dark Earth (MCTAR-FFG only). Approx. 2 1/4″ (5.7cm) long folded, 1 1/4″ (3.2cm) long deployed, 1 1/4″ wide, 5/8″ (4cm) high folded. 1.7 oz. (50g) weight. MCTAR-FFR – 15/8″ (4cm) high deployed.
Bright, highly-visible yellow insert instantly lets the RSO and other shooters know your weapon is unloaded and safe. Perfect for training exercises and classroom activities where it’s vital to quickly identify that weapons are safe at all times. Blocks the chamber to ensure that a round cannot be loaded when the flag is installed. Completely seals the ejection port to keep out dust, dirt, and other debris. Mfg: Brownells SPECS: Plastic, yellow.
Easily build your dream AR-15 with this fully-assembled, nearly-complete Aero Precision OEM rifle in a 20″ A4 configuration! Constructed using second-to-none components, the 20″ A4 Aero Precision OEM rifle leaves off the handguard and buttstock saving you money to buy the accessories you want! Rifle length gas system accepts standard drop-in handguards or free float handguards 20″ A2 barrel chambered in 5.56x45mm NATO, with 1:7 twist 1/2″-28 barrel thread pitch with A2 flash hider Includes FSB & Delta ring assembly Rifle length buffer tube assembly With the 20″, A4 Aero Precision OEM rifle, simply choose the Mfg: Aero Precision
Heavy-duty, steel construction makes these emergency front flip sights the tactical shooter’s choice for LE and military tasks requiring a compact, backup, sight system of superior strength and dependability. Deploys easily with the flick of your thumb; disengages down, out of your sight path when not in use by depressing the spring-loaded pushbutton. Extra thick, protective ears guard against blows that could potentially bend or break the sight post or aperture. Solid clamp with large crossbolt provides rock solid attachment to Picatinny rail systems. Knurled and slotted, quick-release thumbscrew makes sight easy to install/remove. Gas Block Front Flip Sight is designed specificall Mfg: Yankee Hill Machine Co., Inc. SPECS: Steel, Mil-Spec phosphate coating. 1″ (2.5cm) long, 1 1/2″ (3.8cm) wide, 2″ (5.1cm) high when raised. 2.5 oz. (71 g) wt.
Combines superior muzzle control with effective flash suppression even on barrels as short as 10 inches. Patent Pending EFAB technology uses an array of diverging expansion nozzles to diffuse and cool combustion gases resulting in maximum recoil reduction with minimum concussion to the rear and sides of the shooter. Closed bottom section for less dust signature when shooting prone. Precision machined from heat treated stainless steel with an advanced Ionbond high temperature CrCN coating for extreme durability. Fits .223/5.56mm rifles with 1/2-28 muzzle threads. Features pilot hole for permanent pinning to bring 14.5″ barrels to legal length. Accu-Washer Muzzle Ali Mfg: Precision Armament SPECS: Heat-treated stainless Steel. Ionbond CrCN finish – matte black. .900″ diameter, 2.475″ long, 3.5 oz.(99g) weight. Fits .223/5.56mm, 1/2-28 threads.
Cheek pieces snap onto most standard M4-style collapsible stocks and provide comfortable and stable support, proper eye alignment and consistent precision when using optics or iron sights. Quick, easy installation and removal require no gunsmithing or tools. Each unit anchors into the stock’s horizontal ribs and can be positioned along the length of the stock for optimal eye relief. Made of rugged, fiberglass, reinforced polymer to withstand harsh tactical conditions. Mfg: Command Arms Acc SPECS: Reinforced polymer, black. Fits most M4-style collapsible stocks with horizontal ribs. Not compatible with Magpul stocks.
Flattop upper comes with high-end custom features and accessories already installed, ready to snap on the mil-spec lower receiver of your choice. Comes fully assembled with bolt/carrier, charging handle, tactical handguard, gas block, and barrel.Features a free-floated Diamond handguard with uniquely-patterned holes machined between the rails to reduce weight and enhance barrel cooling. Four full-length MIL-STD 1913 Picatinny rails have individually marked slots for quick reference. The handguard bridges the gap to the front of the receiver to form one continuous, uninterrupted top rail; extends over the low-profile gas block for a smooth, streamlined appearance. Specter Upper features Sp Mfg: Yankee Hill Machine Co., Inc. SPECS: Receiver 7075 T6 aluminum alloy, mil-spec Type III hardcoat anodized finish, matte black. Barrel Chrome-moly vanadium steel alloy, heat treated to Rc 25-32, matte black finish. Chrome-lined. 16″ (40.6cm) long. 1-9″ twist, chambered for 5.56mm NATO. Handguard &ndas