Archive

Archive for August, 2018

Zev Technologies Ar-15 Ssr Adjustable Trigger

(4.0)

Buy Zev Technologies Ar-15 Ssr Adjustable Trigger

We found a great deal on the Zev Technologies Ar-15 Ssr Adjustable Trigger for only $247 at Brownells.

The new ZEV Technologies SSR (Single Stage Rifle) Trigger was designed to bridge the gap between the multitude of two stage triggers intended for duty use, and single stage competition triggers. The ZEV SSR Trigger’s engagement, over travel and reset can be adjusted to personal preference. One of the most unique design factors of the new ZEV SSR Trigger is that all adjustments are under detent retention which eliminates the need for thread locker and the possibility of failure from vibration or improper installation. Adjustable Extended trigger bow Two hammer springs included Each unit ships with two hammer springs allowing for a 5lb to 5.5lb trigger p Mfg: Zev Technologies

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Kns Precision, Inc. Ar-15/M16 Enhanced Takedown Pins

(4.0)

Buy Kns Precision, Inc. Ar-15/M16 Enhanced Takedown Pins

We found a great deal on the Kns Precision, Inc. Ar-15/M16 Enhanced Takedown Pins for only $19.99 at Brownells.

Steel, push-button pins give a positive lock that quickly release with finger pressure for easy access to the inside of your AR-15’s upper and lower receivers. These Enhanced Pins now have an end cap to ease in pin removal and installation. The cap also prevents debris from entering the internals of the lower and the pin. Three, spring-loaded detent balls hold pins in place and prevent wear or binding in the pivot hole or receiver hole when removed. Pivot Pin replaces the factory front pivot pin. Takedown Pin replaces the rear, factory takedown pin to eliminate the need for a punch or other tools to disengage the pin. Mfg: Kns Precision, Inc. SPECS: Steel, black oxide finish. Pivot Pin & Takedown Pin – Available for receivers with .250″ diameter pivot pin.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Arrington Accuracy Works Ar-15/M16 Colt Law Enforcement Carbine Armorer’s Wrench

(4.5)

Buy Arrington Accuracy Works Ar-15/M16 Colt Law Enforcement Carbine Armorer's Wrench

We found a great deal on the Arrington Accuracy Works Ar-15/M16 Colt Law Enforcement Carbine Armorer’s Wrench for only $89.99 at Brownells.

Dedicated, heavy-duty wrenches are designed to enable easy removal and installation of the proprietary barrel nut on the Colt LE6940 Advanced Law Enforcement Carbine (ALEC). Self-contained Armorer Wrench features a large, 3/8″ thick handle with a 1/2″ square cutout for a torque wrench or breaker bar, plus a notch for removing the ALEC flash suppressor. Compact Barrel Nut Wrench has the 1/2″ torque driver/breaker bar cutout only. Mfg: Arrington Accuracy Works SPECS: Steel, Parkerized, matte black. Armorer Wrench – 9″ (23cm) long overall, 1.25″ (3.17cm) wide handle.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Brownells Ar-15 Moe Stock Collapsible Mil-Spec W/ Folding Stock Adapter

(4.0)

Buy Brownells Ar-15 Moe Stock Collapsible Mil-Spec W/ Folding Stock Adapter

We found a great deal on the Brownells Ar-15 Moe Stock Collapsible Mil-Spec W/ Folding Stock Adapter for only $289.99 at Brownells.

The Law Tactical Gen 3-M Folding Stock Adapter paired with the Magpul AR-15 MOE stock is a winning combination that makes your AR more comfortable to shoot and easier to store and carry. Law Tactical’s revolutionary Gen 3-M Folding Stock Adapter finally gives the AR-15 platform one feature it always lacked: the ability to fold the stock for the smallest possible profile during storage and carry. The MOE stock retains the general profile of the standard M4 carbine stock, while providing a more stable cheekweld, more sling attachment options, and a .30″ thick rubber recoil pad. Gen 3-M Folding Stock Adapter offers easy, single-button opera Mfg: Brownells

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Spikes Tactical Ar-15 Dynacomp Shorty Extreme 22 Caliber

(4.0)

Buy Spikes Tactical Ar-15  Dynacomp Shorty Extreme 22 Caliber

We found a great deal on the Spikes Tactical Ar-15 Dynacomp Shorty Extreme 22 Caliber for only $81.99 at Brownells.

FEATURES: 5.56 versions are threaded for 1/2×28″ barrels Machined from 303 stainless steel Black melonite finish Ball dimpled expansion ports Includes crush washer Standard 5.56 include pin for permanent attachment Short model will not bring 14.5″ barrels to the legal length BENEFITS: Designed to reduce recoil impulse and muzzle climb, allowing for faster follow-up shots Ball dimpled ports allow for smoother expansion of gases Front of device is .25″ thick to handle full auto abuse Standard and 308 versions will bring a 14.5″ barrel to the legal length when pinned with the included pin Me Mfg: Spikes Tactical

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Us Optics, Inc Ar-15/M16 Rail Mounted Swivel Bubble Level

(5.0)

Buy Us Optics, Inc Ar-15/M16 Rail Mounted Swivel Bubble Level

We found a great deal on the Us Optics, Inc Ar-15/M16 Rail Mounted Swivel Bubble Level for only $104.5 at Brownells.

Compact bubble level instantly displays the amount of tilt or “cant” as you hold your rifle so you can make fast, easy corrections to improve accuracy. Installs on either side of rail/optics to accommodate both left- and right-hand shooters. Folds out-of-the-way when not in use, and a knurled aluminum cover threads over sighting bubble to protect it. Rail Mount clamps to a MIL-STD 1913 Picatinny rail. Protective cover threads onto opposite side for storage when not in use. Mfg: Us Optics, Inc SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Green liquid. Rail Mount – 5/8″ (1.6cm) long, 3 1/4″ (8.3cm) wide open, 17/8″ (4.8cm) wide folded, 1/2″ (1.3cm) high.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Ergo Grips Ar-15 Ergo 2 Suregrip

(4.5)

Buy Ergo Grips Ar-15 Ergo 2 Suregrip

We found a great deal on the Ergo Grips Ar-15 Ergo 2 Suregrip for only $29 at Brownells.

Hand-filling, ergonomic profile with finger grooves, palm swells, and many other features improves shooting comfort and accuracy. Tactical grips feature either Suregrip or Rigid grip for a non-slip, textured finish. Suregrip adds an overmolded, rubberized covering to the polymer body for a superior grip and added cushion. Rigid grip features Rhino Hide, a hard textured finish molded directly into the polymer. Standard Grip is slightly thinner than the factory grip but with additional depth front to back. Pebble grain, non-slip surface and subtle finger grooves improve grasp and promote correct trigger finger position. Curved rear backstrap fills web of hand. ERGO 2 features: Mfg: Ergo Grips SPECS: Polymer, hard texture or overmolded rubber, Black or Dark Earth. 4″ (10cm) long.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Krieger Barrels, Inc Ar-15/M16 223 Match-Grade Dcm Barrel

(4.5)

Buy Krieger Barrels, Inc Ar-15/M16 223 Match-Grade Dcm Barrel

We found a great deal on the Krieger Barrels, Inc Ar-15/M16 223 Match-Grade Dcm Barrel for only $449.99 at Brownells.

This stainless steel match barrel from Krieger features a minimum-spec .223 chamber and hand-lapped, single-point cut rifling with a 1-7.7″ twist rate that’s ideal for 69-80 grain match bullets. Heavy “H-Bar”-style contour and 20″ length make this barrel ideal for service rifle competition. Available in Pre- or Post- Ban configuration (with or without 1/2″-28 tpi muzzle threads). All critical dimensions have been ground between centers to be concentric to the bore, and the gas port has been precisely located in one of the grooves of the rifling. All Krieger AR-15 barrels are headspaced to a JP Enterprises bolt; Krieger has found that JP bolts exhibit Mfg: Krieger Barrels, Inc

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Battle Arms Development Inc. Ar-15 Fixed Clamp-On Front Sight

(4.0)

Buy Battle Arms Development Inc. Ar-15 Fixed Clamp-On Front Sight

We found a great deal on the Battle Arms Development Inc. Ar-15 Fixed Clamp-On Front Sight for only $59.99 at Brownells.

The Battle Arms AR-15 Fixed Clamp-On Front Sight was designed exclusively for Brownells to allow for the longest sight radius possible. No more settling for back up sights attached at the far end of the handguard or front sight bases permanently attached at the gas port. With the Fixed Front Sight, the user can place the assembly as close the muzzle as possible, with it solely in contact with the barrel. When shooting prone, even free float handguards will flex. If employing iron sights, any front sight attached to the handguard will be affected. Machined from 7075 T6 aluminum & featuring a matte black anodized finish, this front sight will be as durable a Mfg: Battle Arms Development Inc. SPECS: Machined from 7075 T6 aluminum & featuring a matte black anodized finish. The sight clamps onto the barrel via three 6-32×3/8″ socket head screws. Front sight post is .072″ in diameter. Front sight will attach to outside diameters ranging from .735″ to .750

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Odin Works Inc. Ar-15 Atlas 5 Compensator 22 Caliber

(4.0)

Buy Odin Works Inc. Ar-15 Atlas 5 Compensator 22 Caliber

We found a great deal on the Odin Works Inc. Ar-15 Atlas 5 Compensator 22 Caliber for only $94.05 at Brownells.

The ODIN Works ATLAS 5 is true innovation when it comes to muzzle devices. The ATLAS 5 features a 3-piece modular design that makes installation simple and fast. The significant amount reduced recoil provided by the ATLAS 5 allows the shooter to stay on target for follow-up shots. The core and the cap are machined from 416R stainless steel and black nitrided while the sleeve is made from titanium. Timing and tuning is done with the titanium sleeve, no shims or crush washers needed. Combine with the ODIN Works adjustable gas block for maximum tuning. 1/2-28 threads for 22 caliber. Mfg: Odin Works Inc.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,
Links