The design muzzle device from PWS effectively reduces both the flash signature and helps to control muzzle rise by redirecting exiting gases. Gas is efficiently vented from the muzzle, so the Triad doesn’t suffer the overpressure problems caused by some traditional comps. Offers noticeably less noise and concussion than traditional brakes or compensators, and installation is straightforward, with PWS proprietary shim system no need for peel or crush washers. Mfg: Primary Weapons SPECS: Steel, matte black phosphate finish. AR-308 2.2″ long, .925″ O.D.. 5/8″ x 24 threads.
Extended length, machined aluminum button has an oversized contact pad for fast, easy operation under stress. Comes laser etched with a distinctive logo that reflects your personality and dresses up your rifle. Drop-in replacement for the original release; uses the factory magazine release spring. Logos will not fade or wear off. Available with patriotic American Flag, aggressive death’s-head, international Biohazard symbol, or “Infidel” logo. Mfg: Tactical Supply Depot SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5/8″ (1.6cm) long, with 5/8″ diameter pad. Fits AR-15/M16 with mil-spec magazine release.
Multi-purpose front sight works as a fully functional gas block, plus delivers lifesaving backup when primary optics fail or become hindered by low light or poor weather conditions. Machined, steel body features a spring-loaded pushbutton that locks sight in the deployed position. When not in use, simply depress the button and fold down for an unobstructed view through your optics. Protective ears guard the sight post from blows incurred during duty. Split, barrel clamp design allows easy mounting to standard contour barrels without removal of flash hiders or muzzle brakes. Hex cap screws pull clamping halves tight to barrel for complete sight immobilization when properly tightened. Durable, Mfg: Yankee Hill Machine Co., Inc. SPECS: Steel, phosphate-coated finish, dark gray. Front Sight – 1-7/8″ (4.8cm) long, 1-3/16″ (3cm) wide. Sight Post 2 1/4″ (5.7cm) high when raised. Fits standard, .750″ diameter barrels. 6 oz. (170g) weight. Rear Sight 1″ (2.5cm) long, 1&fr
The innovative two-piece split rethreading die repairs damaged threads by repairing them from the top down, or bottom up. Made for the 1 13/16-16 thread on the AR-15 buffer tube. Eliminates cross threading. Mfg: Jme Innovations
BSF 6.5 Grendel Carbon Fiber AR-15 Barrels have a match-grade 416R stainless steel inner core sleeved in roll-wrapped carbon fiber that provides superb rigidity, weight savings, and excellent cooling. Three times stronger than steel, the carbon fiber sleeve puts an air pocket between the barrel and carbon, allowing air to flow around the stainless steel inner barrel, further enhancing cooling. Vent holes in the carbon fiber sleeve lets that internal heat escape, expediting barrel cooling even more. In the end, BSF 6.5 Grendel Carbon Fiber AR-15 Barrels stay cool enough you can hold them with your bare hands, even after running 60 consecutive rounds down them! Match grade inner Mfg: Bsf Barrels
Rugged, flip-up sights provide failsafe backup when your primary optic or red dot sight fails. Deploys easily and locks securely in place under powerful spring pressure and two locking detent balls, so it can’t be accidentally bumped down until you hit the spring-loaded button on the left side of the base to retract it. Positions apertures at the same height as factory sights, simplifying integration of these sights on your rifle. Base clamps securely to any military or commercial Picatinny rail using a standard flathead screwdriver – no knobs or levers to catch on brush, clothing, or other gear. Protective “ears” shield posts and apertures from impact. Rear sights bolt Mfg: Troy Industries, Inc. SPECS: Stainless steel and aluminum, Black (Blk) or Dark Earth (DkE) finish. Rear Sights All models 1.17″ (3cm) long, 1.25″ (3.2cm) wide, 1.85″ (4.7cm) high extended. 1.8 oz. (52g) wt. M4/M16-Style Front 1.17″ long, 1.25″ wide, 1.75″ (4.5cm) high exte
These Magpul MOE M-LOK Hand Guards are built for mid-length AR-15/M16 firearms. The MOE M-LOK Hand Guards are built with the same strong yet light weight polymer as the legacy MOE Hand Guards, but comes with the M-LOK slots at the two, six, and ten o’clock positions. The M-LOK system allows for the attachment of optional M-LOK rail sections and other M-LOK accessories such as light mounts, slings, foregrips, etc. Mfg: Magpul
Genuine, Mil-spec quality springs for the AR-15/M-16 that wear out, break, or just get lost. Great for creating your own emergency parts kits. Mfg: Tti Intl SPECS: Springs – steel, music wire or stainless steel wire. Parts sold 5 per pack.
These curved 30-round model comes with the Magpul Self-Leveling Follower. This follower won’t tilt as rounds are fed into or stripped from the magazine, and its self-lubricating polymer composition helps ensure smooth movement in the mag body for easier loading and ultra-smooth feeding. Mfg: Brownells SPECS: Aluminum body, hard-anodized, dry-lube coating. Dry-lube coated chrome silicon spring. Teflon-reinforced plastic follower. Available in Military Gray.