The Kit contains the basic parts to help you build an AR-15 upper. It Includes a stripped upper receiver, a forward assist assembly, an ejection port assembly, a charging handle, and a complete bolt carrier group. The upper receiver is forged from 7075-T6 aluminum and has M4-type feed cuts inside for reliable feeding. It is compatible with standard or mil-spec lowers and components. Tactical Upper Assembly Build Kit has an Aero Precision Stripped Upper Receiver (100-010-612), a DPMS Forward Assist Assembly (231-000-063), a DPMS Ejection Port Cover Assembly (231-000-359), a DPMS Charging Handle (749-002-660), and an Anderson M16 5.56 Bolt Carrier Group (100-0 Mfg: Brownells
Ejection port covers are engraved with colorful slogans to personalize your AR in a unique way. The engraving is on the inside of the cover, so when it’s closed, your gun retains its stock appearance. These are top-quality, all-steel covers made to the correct dimensions for proper fit and function on any mil-spec upper receiver. Mfg: Harford Engraving Services SPECS: 1045/1055 cold-rolled carbon steel, Parkerized, black. Comes with detent and detent spring installed; hinge pin, spring, snap ring required (sold separately). AR-15 fits standard .223/5.56mm AR-15/M16 upper receivers. Not for use on Rock River Arms 9mm or Uramex .22 LR.
Three equally-spaced horizontal prongs efficiently reduce muzzle flash to help minimize the blinding effect of the flash on the shooter in low-light conditions. Short OAL and flat, smooth muzzle face with rounded edges prevents hang-ups and aids in unencumbered weapon deployment. Precision machined from heat-treated steel and finished with AA’s proprietary SCARmor coating that gives high surface hardness for added resistance to blast erosion. 18T flash hider is an 18 tooth mount designed the for Advanced Armament’s first generation, fast attach silencers. Not compatible with the 51T ratchet mount or 90T ratchet mount taper silencers. Mfg: Advanced Armament SPECS: 17-4 stainless steel, SCARmor finish, matte black. 18T 7.62 – 2 1/2″ long. 7/8″ dia. 3.5 oz. (98g) wt.
Ready to be turned into an all-purpose AR-15 pistol, the Aero Precision AR-15 OEM pistol, with 10.5″ barrel chambered in 5.56 NATO, is fully-assembled and nearly-complete. Built with components that are second-to-none, the Aero Precision AR-15 OEM 10.5″ pistol leaves off the handguard saving you money to buy the accessories you want! Carbine length gas system with low profile gas block 4150 Chrome Moly Vanadium steel barrel 1/2″-28 barrel thread pitch with A2 flash hider Mil-spec AR-15/M14 buffer kit 7075 T6 forged aluminum lower receiver With the 10.5″ Aero Precision OEM pistol chambered in 5.56 NATO, all you do is ch Mfg: Aero Precision
An enhanced version of the Magpul CTR stock, the STR (“Storage/Type Restricted”) buttstock features two 4 1/4″ left- and right-side positioned battery storage tubes and a wider cheekweld for extra comfort. Rubber caps at the rear keep the storage compartments resistant to water incursion, yet pop off easily for access to two AA or two CR-123 batteries inside. Features two integral 1 1/4″ sling loops and a socket for a pushbutton QD sling swivel on each side of the stock. Friction locking mechanism minimizes wobble between the buffer tube and the buttstock for a solid, secure “feel”, which is enhanced by the detachable .30″ thick rubber rub Mfg: Brownells SPECS: Reinforced nylon polymer, Black, Dark Earth, or O.D. Green. 7 1/4″ (18.4cm) OAL, 5 1/4″ (13.3cm) high. LOP adjustment range: 3 1/4″ (8.3cm). 12.5 oz (354g) wt.
One-piece riser mount with integral rings provides additional elevation from top of rail to centerline of ring to ensure a proper cheek weld. Precision machined from aluminum bar stock for a secure fit on flattop receiver rail. Scope and mount form a single unit for fast attachment and removal without loss of zero. Mounts by hand tightening the oversized thumb screw to clamp the locking plate. The captive, spring-loaded locking plate maintains a positive mechanical connection that resists loosening under shock and vibration. Four hardened Torx-head screws clamp each ring cap to the lower half. Models available for scopes with 1″ or 30mm diameter bodies. 1″ and 30mm model&rsquo Mfg: Wilson Combat SPECS: Aluminum, hardcoat anodized, black. Approx. 5″ (12.7cm) long, 17/8″ (4.8cm) wide. Approx. 8 oz. (227g) weight. 1″ – Height from top of base to inside bottom of ring: 1.2″ (30.5mm). 30mm – Height from top of base to inside bottom of ring: 1″ (2.5mm).
The Magnesium Hyper-Light KeyMod Handguard from V Seven Weapon Systems is constructed with blend of aluminum and magnesium alloys, resulting in a 30% weight reduction over ordinary all-aluminum handguards. V Seven uses a plasma deposition finishing process that gives each Magnesium Hyper-Light KeyMod Handguard a tough, ceramic-like coating with wear resistance far superior to traditional anodizing. The weight-saving extends to the included barrel nut, which is machined from 7068 aluminum alloy that’s light yet does not sacrifice strength. Light, light, LIGHT! 15″ handguard weight only 5.4 oz. Slim: 1.5″ O.D. (1.3″ I.D.) Free-floats the barrel Mfg: V Seven Weapon Systems
Combines the performance of both a dedicated flash hider and a dedicated compensator. Patent-pending AFAB technology employs a complex matrix of tiny passageways that slowly diffuse and cool combustion gases so you can stay on target during rapid fire engagements while effectively suppressing muzzle flash and side concussion. Closed bottom design reduces dust signature when shooting prone. Precision machined from heat treated stainless steel with an advanced Ionbond high temperature CrCN coating for extreme durability. Fits .223/5.56mm rifles with 1/2-28 muzzle threads. Features pilot hole for permanent pinning to bring 14.5″ barrels to legal length. Accu-Washer Mu Mfg: Precision Armament SPECS: 400 series stainless steel. HRC 26-32. Ionbond CrCN finish – matte black. .865″ diameter, 2.225″ long, 3.0 oz.(85g) weight. Fits .223/5.56mm, 1/2-28 threads.