Archive

Archive for December, 2017

J P Enterprises Ar-15 Silent Captured Springs Gen 2 H2

(4.5)

Buy J P Enterprises Ar-15 Silent Captured Springs Gen 2 H2

We found a great deal on the J P Enterprises Ar-15 Silent Captured Springs Gen 2 H2 for only $176.95 at Brownells.

The Gen 2 Drop-in captured-spring recoil system helps your AR function more smoothly and quieter without any permanent modifications. The carefully balanced, custom-ground buffer spring, combined with the JP LMOS buffer, greatly reduces friction and vibration – say goodbye to the annoying “spoon over a cheese grater” noise of conventional springs and buffers. Fits buffer tubes for both M4-style collapsible stocks and also, using the included spacer, the longer tubes for fixed rifle stocks. The H2 buffer is heavier than the standard spring. The buffer includes two Tungsten weights in addition to one steel weight. Weighing approximately 4.7 oz. Recommended for use Mfg: J P Enterprises

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Apex Machining Co Ar-15 Picatinny Direct Thread Rail Post 08/09 Aluminum

(4.0)

Buy Apex Machining Co Ar-15 Picatinny Direct Thread Rail Post 08/09 Aluminum

We found a great deal on the Apex Machining Co Ar-15 Picatinny Direct Thread Rail Post 08/09 Aluminum for only $55.99 at Brownells.

12.5″ (Rifle) and 15″ (Extended Rifle) top rails are the full-length, 12 o’clock-mounted rails for these handguards. Mfg: Apex Machining Co SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 12.5″ and 15″ rails match post-August 2009 DPMS-pattern upper receiver rails, and fit Apex handguards.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Brownells Ar-15 Tactical Sight Set W/ 360 Rear Sight

(4.5)

Buy Brownells Ar-15  Tactical Sight Set W/ 360 Rear Sight

We found a great deal on the Brownells Ar-15 Tactical Sight Set W/ 360 Rear Sight for only $129.99 at Brownells.

Rugged flip-up sights provide instant backup when primary sight fails or weather conditions limit its use. Robust cross-bolt with oversized, slotted hex nut locks clamping block tightly to Picatinny accessory rail for zero sight movement. Clean, low profile design won’t snag on other gear when folded down. All models regulate with mil-spec A2 carbine sights or same-height aftermarket sights-perfect for co-witnessing with non-magnifying red dot and holographic optical sights. Precision machined from hardcoat anodized 6061 T6 aluminum and heat-treated 4140 steel for repeatable settings and the strength to handle the rigors of combat. A2 windage knob on rear sights provides preci Mfg: Brownells SPECS: 6061 T6 aluminum and 4140 steel, matte black. Standard Rear & Tritium Rear Sight – 1-3/8″ (3.5cm) overall length, 1-7/8″ (4.8cm) high (extended), 7/8″ (2.2cm) high (folded). 360 Series Rear – 1-3/8″ overall length, 1-7/8″ high (ext

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Brownells Car-15/M4 Low-Profile Ambidextrous Sling Adapter

(5.0)

Buy Brownells Car-15/M4 Low-Profile Ambidextrous Sling Adapter

We found a great deal on the Brownells Car-15/M4 Low-Profile Ambidextrous Sling Adapter for only $23.99 at Brownells.

Steel sling adapter features a unique slot/hole configuration that keeps the plate as slim and compact as possible to help eliminate snags on brush and your BDUs when carrying rifles with collapsible stocks. Accepts both 1 1/4″ wide webbing and single-point clip-on tactical slings. Move the sling from one side of the receiver to the other or swap it for a different one in seconds. Provides plenty of clearance for forward assist and easy access for clearing jams. Replaces factory receiver plate without gunsmithing. Mfg: Brownells SPECS: Steel, black oxide finish. Fits CAR-15/M4 and collapsible-stocked AR-15 rifles. 2″ (5.2cm) long, 1-13/16″ (4.6cm) wide, 1/8″ thick.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Blackhawk Industries Ar-15 Safety Selectors

(4.5)

Buy Blackhawk Industries Ar-15 Safety Selectors

We found a great deal on the Blackhawk Industries Ar-15 Safety Selectors for only $17.99 at Brownells.

Blackhawk’s AR-15 Safety Selector lets the user operate the safety lever with little or no change in your grip. A drop-in replacement for the factory safety, the Blackhawk AR-15 Safety Selector improves ergonomics and makes manipulation of the safety easier. High profile makes it easier to locate than stubby mil-spec lever Available in Standard Right Hand or Ambidextrous Offset configuration with 45deg offset Made of high-quality alloy with a matte black finish that matches your rifle’s receiver Blackhawk AR-15 Safety Selectors are compatible with standard, mil-spec AR-15 lower receivers. Mfg: Blackhawk Industries

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

B5 Systems Ar-15 Trigger Guards Composite

(4.5)

Buy B5 Systems Ar-15 Trigger Guards Composite

We found a great deal on the B5 Systems Ar-15 Trigger Guards Composite for only $7.5 at Brownells.

The Trigger Guard offers a drop in upgrade over the standard AR trigger guard. The enlarged profile allows for glove use in cold weather or tactical operations. The trigger guard also maintains the original swing down function for use with heavier gloves though not with the spring loaded plunger, you must remove or screw in the provided retaining screw. It is a set screw attachment pin, not a spring loaded pin. Mfg: B5 Systems

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Rubber City Armory Ar-15/M16 Adjustable Gas Key

(5.0)

Buy Rubber City Armory Ar-15/M16 Adjustable Gas Key

We found a great deal on the Rubber City Armory Ar-15/M16 Adjustable Gas Key for only $39.99 at Brownells.

The Rubber City Armory Adjustable Gas Key enhances performance of low mass and standard mass GI systems without unnecessary disassembly. Gas flow is adjusted and maintained at the carrier with 2 set screws, one to adjust gas flow and one to lock it in place. Made from Pre-Hardened 4140: 28-32RC with radiused corners reducing sharp edges. 2 mounting bolts included. Mfg: Rubber City Armory SPECS: Made from Pre-Hardened 4140: 28-32RC.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Command Arms Acc Ar-15 Standard M4 Stock Saddle

(4.5)

Buy Command Arms Acc Ar-15 Standard M4 Stock Saddle

We found a great deal on the Command Arms Acc Ar-15 Standard M4 Stock Saddle for only $16.99 at Brownells.

Provides added cheek support for increased comfort and shooting accuracy to AR-type rifles equipped with M4-style collapsible stocks. Plus, gives an advanced tactical appearance similar to the SOPMOD stock. Made from a very lightweight, fiberglass reinforced plastic that’s as strong as it is functional. Waterproof, sealed compartments on each side will hold four “AA” or six CR123 cell batteries. No gunsmithing required for installation; saddle locks onto stock with accessory sling loop hardware that’s provided. Rubberized model includes all the features of the standard model and adds a rubberized, no-slip coating that gives an exceptionally solid cheekweld for even greater shooter comfort an Mfg: Command Arms Acc SPECS: Injection molded plastic, black, matte finish,53/4″ (14.5cm) long, 23/4″ (6.9cm) wide. Fits M4-style stocks only.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Falcon 37 Inc Ar-15 Habu? Mod1 Advanced Engagement Charging Handle

(4.5)

Buy Falcon 37 Inc Ar-15 Habu? Mod1 Advanced Engagement Charging Handle

We found a great deal on the Falcon 37 Inc Ar-15 Habu? Mod1 Advanced Engagement Charging Handle for only $89.99 at Brownells.

The HABU MOD 1 Advanced Engagement Charging Handle allows for robust charging of the AR-15, while simultaneously integrating a cheek riser. The HABU’s unique form factor is designed for the non-dominant hand to charge the rifle, much like a semi-automatic handgun, using your full grasp & hand. This design is completely ambidextrous, with no small latches to worry about engaging. Proper cheek weld can also be attained, without the use of stock mounted cheek risers, which often interfere with operating the charging handle. The HABU works with any commercially available AR-15 buttstock, both collapsible & fixed. The cheek riser’s placement ca Mfg: Falcon 37 Inc

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,

Superior Shooting Ar-15/Car-15 Extractor/Ejector Spring Set

(4.0)

Buy Superior Shooting Ar-15/Car-15 Extractor/Ejector Spring Set

We found a great deal on the Superior Shooting Ar-15/Car-15 Extractor/Ejector Spring Set for only $12.95 at Brownells.

Replacement, drop-in fit chrome silicon extractor and ejector springs from David Tubb provide long term durability and up to 80% more power than factory springs in AR-15 rifles. Precision manufacturing and high quality steel give extremely consistent compression cycle for smooth operation over thousands of rounds. Mfg: Superior Shooting SPECS: Chrome silicon steel.

Click Here to Buy Now

Categories: AR-15 Parts Tags: ,
Links