Archive

Archive for November, 2015

Brownells Ar-15/M16 Upper Parts Kit For Non-Free Float Upper

(4.0)

Buy Brownells Ar-15/M16 Upper Parts Kit For Non-Free Float Upper

We found a great deal on the Brownells Ar-15/M16 Upper Parts Kit For Non-Free Float Upper for only $167.99 at Brownells.

Handy kits gather up all the small parts needed to complete a functional upper receiver. Eliminates the hassle of tracking down every component separately, including hard-to-find pins and springs, so you can start a custom build knowing you won’t be held up waiting for that one part you forgot to order. Select the stripped upper, barrel, gas block, flash hider, bolt/carrier, and handguard you want, then purchase the completion kit to fit the handguard style and gas system length. Each kit contains original factory parts, so you can install parts made by the manufacturer of your receiver. AR components from one manufacturer will fit another manufacturer’s receiver, but fitting Mfg: Brownells SPECS: Carbine 9 3/4″ (24.8cm) gas tube length. Mid-Length 11 3/4″ (29.9cm) gas tube length. Rifle 15-1/8″ (38.4cm) gas tube length.

Click Here to Buy Now

Anderson Manufacturing Ar-15 80% Lower Receiver Jig

(4.5)

Buy Anderson Manufacturing Ar-15 80% Lower Receiver Jig

We found a great deal on the Anderson Manufacturing Ar-15 80% Lower Receiver Jig for only $75 at Brownells.

Anderson Manufacturing 80% Lower Receiver Jig allows you to complete a forged aluminum 80% lower receiver. Jig includes proper diameter bits to drill all necessary holes. Plates screw together so that you can get accurate and precise geometry for your new build. View Instructions Mfg: Anderson Manufacturing

Click Here to Buy Now

Daniel Defense Ar-15/M16 Omega Rail

(4.5)

Buy Daniel Defense Ar-15/M16 Omega Rail

We found a great deal on the Daniel Defense Ar-15/M16 Omega Rail for only $249 at Brownells.

Free-float handguard with four MIL-STD 1913 Picatinny rails installs in minutes with no permanent modifications to weapon. Two-piece design allows installation using basic tools and the included hex key. Tighten the four Allen-head screws against the barrel nut with the hex key to eliminate movement and align the extended top rail with the receiver rail for an exceptionally long expanse of uninterrupted accessory mounting space. Plenty of ventilation cuts keep barrel cool and minimize weight-perfect for tactical rifles where every ounce saved improves speed and maneuverability. Rail slots are indexed with white letters and numbers for precise positioning and remounting of accessorie Mfg: Daniel Defense SPECS: 6061 T6 aluminum, hardcoat anodized, Matte Black. Includes mounting screws, ladder-style rail covers, and instructions. 7.0 – 6-3/8″ (16.2cm) long. Top Rail – 7″ (17.8cm) long. 7.6 oz. (217g) wt. Fits AR-15 with carbine-length gas system. 9.0 – 8-3/8″ (21.3cm) lo

Click Here to Buy Now

Alg Defense Ar-15 Alg Trigger With Lower Parts Kit

(4.0)

Buy Alg Defense Ar-15 Alg Trigger With Lower Parts Kit

We found a great deal on the Alg Defense Ar-15 Alg Trigger With Lower Parts Kit for only $74.99 at Brownells.

Trigger/hammer kits feature rugged military-type components carefully prepped to give a smoother trigger pull while maintaining the original geometry for maximum reliability. These are “enhanced standard” triggers, so the armorer continues to work with the configuration he’s accustomed to. The QMS(Quality Mil-Spec) set has the sear contact surface precision-honed to smooth and lighten the pull to around 6 1/2 lbs. The ACT (ALG Combat Trigger) adds nickel-boron coating on the trigger and nickel-Teflon coating on the hammer, disconnnector, and pins to increase surface hardness and reduce friction, with an average pull weight of about 6 lbs. Both kits also available wit Mfg: Alg Defense SPECS: Hammer/trigger 8620 steel. Disconnnector 1070 high-carbon steel. Hammer/trigger pins heat treated 4140 chrome-moly steel. Both kits contain trigger, trigger spring, hammer, hammer spring, disconnnector, disconnnector spring, hammer and trigger pins, and instructions

Click Here to Buy Now

Dpms Ar-15/M16 A2 Buttstock Door

(4.0)

Buy Dpms Ar-15/M16 A2 Buttstock Door

We found a great deal on the Dpms Ar-15/M16 A2 Buttstock Door for only $16.99 at Brownells.

Mfg: Dpms

Click Here to Buy Now

Bushmaster Firearms Int.Llc. Ar-15 Stripped Lower Receiver

(5.0)

Buy Bushmaster Firearms Int.Llc. Ar-15 Stripped Lower Receiver

We found a great deal on the Bushmaster Firearms Int.Llc. Ar-15 Stripped Lower Receiver for only $169.99 at Brownells.

AR-15 STRIPPED LOWER RECEIVER Mfg: Bushmaster Firearms Int.Llc.

Click Here to Buy Now

Core Rifle Systems Ar-15/M16 Billet Charging Handles

(4.0)

Buy Core Rifle Systems Ar-15/M16 Billet Charging Handles

We found a great deal on the Core Rifle Systems Ar-15/M16 Billet Charging Handles for only $19.99 at Brownells.

Machined from a solid aluminum billet, charging handle drops in to standard AR-15/M16 uppers to offer exceptional strength and extremely consistent tolerances. Hardcoat anodized to resist wear and corrosion, the billet charging handles are available with three different sizes of latches. V1 features standard latch. V2 features .8″ long latch. V3 features 1″ long latch. Mfg: Core Rifle Systems SPECS: Machined billet 6061 T6 aluminum, hardcoat anodized matte black. 6 7/8″(17.5cm) long. V1 latch .56″ (1.4cm) long. V2 latch .8″ (2cm) long. V3 latch 1″ (2.5cm) long.

Click Here to Buy Now

Dpms Ar-15/M16 Extractor Spring Assembly

(4.5)

Buy Dpms Ar-15/M16 Extractor Spring Assembly

We found a great deal on the Dpms Ar-15/M16 Extractor Spring Assembly for only $2.49 at Brownells.

Matches the original equipment specs to keep the extractor under the correct tension. Rubber insert gives stability to the spring and lengthens service life. Mfg: Dpms SPECS: Steel, 3/16″ (4.7mm) long.

Click Here to Buy Now

Geissele Automatics Llc Ar-15 Super Dynamic Triggers

(4.5)

Buy Geissele Automatics Llc Ar-15 Super Dynamic Triggers

We found a great deal on the Geissele Automatics Llc Ar-15 Super Dynamic Triggers for only $260 at Brownells.

The Super Dynamic (SD)triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived pull weight, improves control, and gives excellent tactile feedback. Super Dynamic Combat (SD-C) trigger has a 2.5 lb. first stage and a 2 lb. second stage for a 4.5 lb total pull weight with a sharp, repeatable trigger release. Super Dynamic Enhanced (SD-E) trigger has a combined 3.5 lb. total pull weight, with a 2.3 lb. first stage and a 1.2 lb. second stage. Super Dynamic 3-Gun (SD-3G) single-stage trigger has 3.5 lb. pull weight with a short pull length and short reset – excellent for fast-action competitions. Mfg: Geissele Automatics Llc SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154″ diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Does not fit HK416 weapons with firing pin safety. Kit includes trigger andhammer assemblies, springs, ha

Click Here to Buy Now

Dpms Ar-15/M16 Bolt Catch

(4.0)

Buy Dpms Ar-15/M16 Bolt Catch

We found a great deal on the Dpms Ar-15/M16 Bolt Catch for only $9.99 at Brownells.

AR-15/M16 BOLT CATCH Mfg: Dpms

Click Here to Buy Now

Links