Archive

Archive for April, 2015

Midwest Industries, Inc. Ar-10? Carbine Forend

(4.0)

Buy Midwest Industries, Inc. Ar-10? Carbine Forend

We found a great deal on the Midwest Industries, Inc. Ar-10? Carbine Forend for only $169.99 at Brownells.

Snap-on railed forearm gives your ArmaLite AR-10 carbine all the accessory mounting versatility of Midwest Industries two-piece AR-15 forearms. Four MIL-STD 1913 Picatinny rails contain 20 mounting slots each, and are laser etched with white alphanumeric position markings. Lower section may be left off to provide clearance for a grenade launcher, tear gas launcher, or shotgun. Direct replacement for plastic factory handguard-no gunsmithing or permanent alterations required. Mfg: Midwest Industries, Inc. SPECS: Machined 6061 T6 billet aluminum, hardcoat anodized, matte black. 81/8″ (20.6cm), 2 1/2″ (6.4cm) diameter. Fits ArmaLite AR-10 carbines only.

Click Here to Buy Now

Brownells Mag Coupler For Ar-15 W/2 30 Round Cs Magazines

(4.5)

Buy Brownells Mag Coupler For Ar-15 W/2 30 Round Cs Magazines

We found a great deal on the Brownells Mag Coupler For Ar-15 W/2 30 Round Cs Magazines for only $35.99 at Brownells.

Tough, molded nylon magazine coupler binds a backup magazine directly to the mag in the gun for lightning fast tactical reloads without moving your trigger hand. Three, steel bolts let you adjust retention force, so the magazines won’t slip out even during vigorous combat maneuvers. Also included are two grey AR-15/M-16 30 Round Brownells Magazines. The most up-to-date & reliable civilian magazine available. Mfg: Brownells SPECS: Coupler – Molded nylon, black, with steel tension adjustment bolts. 2 3/4″ (7cm) long, 2-7/16″ (6.2cm) wide, 3 1/4″ (8.3cm) high. Magazine – Aluminum body, MIL-STD hard-anodized, dry-lube coating. Chrome silicon spring. MIL-STD plastic follower.

Click Here to Buy Now

Dead On Arms, Llc Ar-15/M16 Pin-Less Oversized Trigger Guard

(4.5)

Buy Dead On Arms, Llc Ar-15/M16 Pin-Less Oversized Trigger Guard

We found a great deal on the Dead On Arms, Llc Ar-15/M16 Pin-Less Oversized Trigger Guard for only $17.99 at Brownells.

Eliminates the need for driving pins into AR-15/M4 lowers to install trigger guard and possibly damaging the lower receiver. Oversized guard allows greater clearance for finger. Mfg: Dead On Arms, Llc Type 3 hard coat anodized black 7075-billet aluminum

Click Here to Buy Now

Brownells Ar-15/M16/M4 Hammer Springs

(4.0)

Buy Brownells Ar-15/M16/M4 Hammer Springs

We found a great deal on the Brownells Ar-15/M16/M4 Hammer Springs for only $3.99 at Brownells.

Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replacement springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks. Mfg: Brownells SPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS). AR-15/M16 springs colors may vary.

Click Here to Buy Now

Double Star Ar-15/M16 Flash Enhancer

(4.5)

Buy Double Star Ar-15/M16 Flash Enhancer

We found a great deal on the Double Star Ar-15/M16 Flash Enhancer for only $64.99 at Brownells.

FEATURES: 1/2×28 threads Convex ports for flash enhancement 1018 steel Black oxide Six portsBENEFITS: Enhances an AR-15 or M16’s muzzle flash Especially useful for video or photography Subtle appearance does not make the enhancer stand out Black oxide finish provides durability and corrosion resistance Mfg: Double Star

Click Here to Buy Now

C. J. Weapons Acc. Ar-15/Ar-Style Chamber Maid Swab Kits

(4.0)

Buy C. J. Weapons Acc. Ar-15/Ar-Style Chamber Maid Swab Kits

We found a great deal on the C. J. Weapons Acc. Ar-15/Ar-Style Chamber Maid Swab Kits for only $10.99 at Brownells.

Replaces the steel bristles on the standard .223 and .308 Chamber Maid kits with a super-absorbent, star-shaped felt swab precisely contoured for thorough yet gentle cleaning of the lug recesses on AR-15 and AR-style .308 rifles. Each kit contains five swabs, bronze bore brush, removable handle, and a flexible steel braid, rubber coated cleaning rod. Mfg: C. J. Weapons Acc. SPECS: Kits available for AR-15 .223 and AR-type .308 rifles. Each kit contains five swabs, bronze bore brush, removable handle, and a flexible steel braid, rubber coated cleaning rod, 10″ (25.4cm) long. Felt swabs – .308 – replacement pak of 12. .223 – replacement pak of 20. Accepts brushes with 8-

Click Here to Buy Now

Ameriglo Ar-15/M16 Night Sight Set

(4.5)

Buy Ameriglo Ar-15/M16 Night Sight Set

We found a great deal on the Ameriglo Ar-15/M16 Night Sight Set for only $79.99 at Brownells.

Self-illuminating, green, Trijicon(R) Tritium inserts provide an easy-to-acquire, 3-dot sight picture for fast target acquisition in low-light conditions. Inserts appear as white dots for enhanced targeting in normal daylight conditions. Ghost ring rear aperture features dual side-on-side dots for easy sight alignment, and the elevation-adjustable, standard-width front blade is a drop-in replacement for an A2-type front post with a single green lamp for an instantly recognizable six o-clock hold. A block-out locking ring helps maintain your careful front sight adjustments. Mfg: Ameriglo SPECS: Machined steel, matte black finish. Front Blade – .090″ (2.3mm) wide, .250″ (6.3mm) high. Rear Sight – battle aperture .083″ (2.1mm) dia.; ghost ring aperture .207″ (5.2mm) dia. Fits AR-15/M16 equipped with A2-type elevation-adjustable rear sights. Kit includes rear sight

Click Here to Buy Now

Double Star Ar-15/M16 Charging Handle Assembly

(4.0)

Buy Double Star Ar-15/M16 Charging Handle Assembly

We found a great deal on the Double Star Ar-15/M16 Charging Handle Assembly for only $18.99 at Brownells.

Cycle loads with ease using this military-style charging handle assembly, complete and ready to drop-in any mil-spec upper receiver. Precision machined from rugged, yet lightweight 6061 T6 aluminum, then hardcoat anodized for a wear-resistant surface that adds strength. A final, Teflon(R) coating provides a slick, self-lubricating finish for exceptionally smooth operation. Mfg: Double Star SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 67/8″ (17.5cm) long. Fits mil-spec AR-15/M16 upper receivers.

Click Here to Buy Now

Boonie Packer Products Ar-15/M16 Improved Redi-Mag

(4.0)

Buy Boonie Packer Products Ar-15/M16 Improved Redi-Mag

We found a great deal on the Boonie Packer Products Ar-15/M16 Improved Redi-Mag for only $79.99 at Brownells.

Don’t lose precious seconds in competition or combat fumbling for a spare magazine during a reload. This rugged speed loading system clamps directly to the lower receiver of any AR-15/M16 rifle or carbine and securely holds a second, fully loaded magazine alongside the mag well for super-fast mag changes. More reliable and easier to use than improvised methods, like taping two magazines together, that can cause malfunctions at critical moments. Closed-top design protects the spare mag from rain, dirt, dust, and debris and prevents the top round from jumping forward under recoil. Independent release system lets you drop the spare mag and the mag in the weapon separately to allow tact Mfg: Boonie Packer Products SPECS: Steel, Parkerized, or 6061 T6 aluminum, hardcoat anodized, both dark gray, with reinforced molded polymer BCE and spacer. 3 1/2″ (8.9cm) long, 2 1/2″ (6.4cm) wide, 2 3/4″ (7cm) high. Weight: 8.4 oz. (234g) (steel), 5.6 oz. (159 g) (aluminum). Fits AR-15/M16/M4 ri

Click Here to Buy Now

Brownells Ar-15/M16 Tactical Magazine/Pouch Readiness Pack

(4.0)

Buy Brownells Ar-15/M16 Tactical Magazine/Pouch Readiness Pack

We found a great deal on the Brownells Ar-15/M16 Tactical Magazine/Pouch Readiness Pack for only $99.99 at Brownells.

Convenient kit helps you maintain peak tactical readiness with everything you need to load, store, and carry up to 90 rounds of .223/5.56 ammo for your AR-15/M16. Contains three, ultra-reliable Brownells 30-round Tactical Magazines equipped with Magpul’s Ranger(R) floorplate to help ensure fast, positive extraction from the pouch and lightning-quick mag changes. 30-round magazines are further enhanced with a Magpul self-leveling follower to ensure snag-free movement of the round stack for easier loading and smooth, reliable feeding. You also get a Butler Creek LULA(R) loader for pain-free loading and unloading of a full mag in seconds, and our Signature Series Triple Magazine Pouch Mfg: Brownells SPECS: Magazines – Aluminum body, hard-anodized, dry-lube coated, Military Gray. Dry-lube coated chrome silicon spring. 30-Rd Magazines have gray, Mag-pul self-leveling follower. Triple Mag Pouch – 1000 denier Cordura Plus nylon, Black. 30-rd – 9 1/2″ (24.1cm) long, 8 3/4″

Click Here to Buy Now

Links