FEATURES: Readily convertible from single-point to a two-point attachment Single hand adjustments Quick detach lanyard Positive locking metal hardware Designed to work in conjunction with the Magpul ASAP All new Magpul designed and built hardware Available in black Made in USA BENEFITS: Designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions Allows the operator to leverage the maneuverability of single-point attachment for direct action or two-point attachment for stability Used in conjunction with the Magpul ASAP plate, the MS3 enables seamless transitio Mfg: Magpul
Machined, heat-treated steel safety selector puts oversized levers on both sides of the receiver for easy ambidextrous operation. Large surface area lets you operate the safety while wearing gloves, and eliminates fumbling in the dark. Pads are deeply grooved for an ultra-secure grip under stress or when hand is wet. Can be customized by positioning the larger pad on either side of the receiver, or by applying high-visibility paint. Mounting hardware included. Individual Safety Selector Levers are available for customization. Available individual levers include Standard, Short, Thin, Short & Thin, Hybrid, and Crank Levers. They Hybrid lever features a standard width top, with a thin end. Mfg: Battle Arms Development Inc. SPECS: 12L14 steel, Parkerized, black or flat dark earth. Includes Torx screws and L-key wrench.
The easiest way to stock and sell genuine, mil-spec AR-15 parts, or use to assemble rifles on your receivers. Much lower in total cost than buying the parts one at a time. All kits listed contain only new, current-production, genuine, mil-spec parts; never pull-offs or direct-exchange surplus. Lower Receiver Parts Kit includes trigger spring, trigger pin, hammer spring, hammer pin, disconnector and spring, bolt catch, bolt catch plunger, bolt catch spring, bolt catch roll pin, selector, selector detent, selector detent spring, (2) takedown detents and springs, pivot pin, rear takedown pin, buffer retainer and spring, magazine catch, button and spring, screw and washer, triggerguard assembly Mfg: Dpms Firearms Llc SPECS: Unassembled kits packaged in heat-sealed, poly bags, labeled for resale. Fits AR-15 only.
Machined aluminum mounts clamp directly to a MIL-STD 1913 Picatinny flattop rail to raise the scope and push it forward, eliminating the need for separate risers or specialized short eye relief optics. Slides into place and secures with steel crossbolts that hold tight. Eleven MIL-STD 1913 Picatinny cross-slots on top offer plenty of flexibility in ring spacing. Mark 1 locks into place on the receiver with two, flush-fitting T-15 Torx screws. Mark 2 rail provides the same advantages as the Mark 1, with the added benefit of easy-to-grasp 1/2″ hex nuts on the crossbolts for quick-release removal and re-install without loss of zero. Mfg: Leupold SPECS: Aluminum, hardcoat anodized finish, matte black. Steel crossbolts. 5 1/2″ (14cm) long.
The MUR is a flattop upper receiver with thicker walls than a standard upper to provide a more rigid platform for greater stability, better accuracy, longer service life, and improved reliability. Precision machined from a fully heat-treated and cryogenically stress-relieved aluminum forging, before hand finishing to final dimensions. All critical interface points are 100% compatible with mil-spec select-fire AR-15/M16/M4 components and lower receivers, and will fit most commercial semi-auto lowers. A slick, dry-lube coating over the hard-anodized finish further guards against surface wear and helps ensure smooth operation of bolt/carrier and other internal components. Comes with true MIL-ST Mfg: Vltor Weapon Systems SPECS: 7075 T6 aluminum, Type II, Class 3 hardcoat anodized, dry lube coating, matte black. .250″ dia. pivot/takedown pin holes.
Custom engraved AR15/M16 trigger guards Enlarged designed allows for easier use with gloves Mounting hardware & wrench included for install Mfg: Tactical Supply Depot
Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replacement springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks. Mfg: Brownells SPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS).
Rugged aluminum and steel flip-up rear sight regulates properly with A2-height front sights and can be co-witnessed through an optic. Dual apertures are calibrated for close- and mid-range targets, simply aim through both or fold the first one down and use the second aperture. Easily mounts to a Picatinny receiver rail; locknut is retained by a safety wire, so you can’t lose it. Non-snagging lever instantly releases the spring-loaded sight into the ready position. #40 Std. A2 is 1″ high from top of flattop when folded and has A2 apertures calibrated for 250-300 and 500-600 meters. Windage is click adjustable in increments of 3/4 MOA. Compact #40L models stand only 5/8&qu Mfg: A.R.M.S.,Inc SPECS: Apertures Steel, matte black. Hardware – Stainless steel, matte black. Base – aluminum, hardcoat anodized, matte black. 23/16″ (5.6cm) long, 13/8″ (3.5cm) wide. #40 Std. A2 1″ (2.5cm) high from flattop (folded), 15/8″ (4.1cm) high (deploye
Rubber pad slips onto the buttplate of any M4-type collapsible stock and has an integral monopod that extends to provide extra support for precise shooting. Simply pull on the elevation knob to deploy the ‘pod instantly; hit the pushbutton release to retract it out of the way. Four locking detents at 3/4″ increments let you set the basic height, while the threaded extension rod can be unscrewed an additional 3 3/4″ for 7″ total available elevation. Adjust the knurled locking ring to keep the rod in place when it’s set. Textured, neoprene rubber pad adds 1″ to overall length of stock, helps keep the stock seated on the shoulder, and reduces felt recoil Mfg: Global Military Gear SPECS: Pad Neoprene rubber, black. 5-5/8″ (14.3cm) tall, 2″ (5.8cm) wide, 1 1/2″ (3.8cm) thick. Pod Aluminum, anodized, matte black. Elevation Knob Steel, black oxide finish. 4 3/4″ (12cm) long. 10.2 oz. (289g) weight.
Durable, tough, nylon bristles aggressively scrub your chamber; nylon tufts reach and clean the locking lug recess. Available for M16, AR-15, and AR-10 rifles. M16 has an 8-36 thread to directly thread into the military’s “Cleaning Rod, Small Arms”. Mfg: Brownells SPECS: Nylon brush, brass stem. M16 – 3-7/8″ (9.8cm) overall. 8-36 military thread. AR-15 – 3-7/8″ (9.8cm) overall. 8-32 standard thread. AR-10 – 4-3/8″ (11.2cm). 8-32 standard thread.