Archive

Archive for March, 2014

Vltor Weapon Systems Ar-15/M16 Enhanced Modstock

(5.0)


Buy Vltor Weapon Systems Ar-15/M16 Enhanced Modstock

We found a great deal on the Vltor Weapon Systems Ar-15/M16 Enhanced Modstock for only $119.65 at Brownells.

“Clubfoot”-style adjustable stock with modular storage options gives the tactical shooter exceptional versatility and weapon control. The EMOD is 1 1/2 ” longer than the original Modstock to ensure a solid, comfortable cheekweld even on rifles with long eye relief scopes. Two, detachable, full-length storage compartments provide additional cheek support for more comfort and stability. Each waterproof compartment holds up to 3 AA or 4 CR123 batteries, and a permanent flip-open compartment on the left side of the stock holds two more AA batteries or other small items. Extra-length buttplate with removable rubber pad angles forward from heel to toe for a better hold in the “ready” position and whe Mfg: Vltor Weapon Systems SPECS: Molded polymer, black or dark earth. 7 3/4” (19.7cm) long. Basic EMOD Kit includes buttstock and two (2) detachable storage compartments. Mil-Spec fits 1.14” O.D. carbine buffer tubes only. Commercial fits larger, 1.17” O.D. commercial buffer tubes. Mil-Spec Comb

Click Here to Buy Now

Warne Mfg. Company Ar-15/M16 R.A.M.P. Tactical Mount

(4.0)


Buy Warne Mfg. Company Ar-15/M16 R.A.M.P. Tactical Mount

We found a great deal on the Warne Mfg. Company Ar-15/M16 R.A.M.P. Tactical Mount for only $169.59 at Brownells.

The Rapid Acquisition Multisight Platform (R.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 1 3/4″ of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable MIL-STD 1913 Picatinny rails on the left and right sides that let you mount secondary sights 45deg off-axis from the main optic. Each top ring strap is secured with four Torx screws for recoil-proof holding power. Two large hex nuts and 3 3/4″ long steel clamping bar lock the mount to a Picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Model Mfg: Warne Mfg. Company SPECS: 6061 T6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8″ (18.1cm) long, 23/8″ (6cm) wide, 2 1/4″ (5.7cm) high. Height measured from top of rail to bottom of ring: .75″ (1.9cm). Approximately 9.7 oz. (275g) wei

Click Here to Buy Now

Yankee Hill Machine Co., Inc. Ar-15/M16 Clamp-On Front Sight Gas Block

(4.5)


Buy Yankee Hill Machine Co., Inc. Ar-15/M16 Clamp-On Front Sight Gas Block

We found a great deal on the Yankee Hill Machine Co., Inc. Ar-15/M16 Clamp-On Front Sight Gas Block for only $109.99 at Brownells.

Multi-purpose front sight works as a fully functional gas block, plus delivers lifesaving backup when primary optics fail or become hindered by low light or poor weather conditions. Machined, steel body features a spring-loaded pushbutton that locks sight in the deployed position. When not in use, simply depress the button and fold down for an unobstructed view through your optics. Protective ears guard the sight post from blows incurred during duty. Split, barrel clamp design allows easy mounting to standard contour barrels without removal of flash hiders or muzzle brakes. Hex cap screws pull clamping halves tight to barrel for complete sight immobilization when properly tightened. Durable, Mfg: Yankee Hill Machine Co., Inc. SPECS: Steel, phosphate-coated finish, dark gray. 1-7/8″ (4.8cm) long, 1-3/16″ (3cm) wide. Sight Post – 2 1/4” (5.7cm) high when raised. Fits standard, .750” diameter barrels. YHM-9394 – 6 oz. (170g) weight. YHM-9395 – 5.5 oz. (156g) weight. YHM-9835A –

Click Here to Buy Now

Spikes Tactical Ar-15/M16 Fn Cold Hammer Forged Barrels

(4.0)


Buy Spikes Tactical Ar-15/M16 Fn Cold Hammer Forged Barrels

We found a great deal on the Spikes Tactical Ar-15/M16 Fn Cold Hammer Forged Barrels for only $259.95 at Brownells.

FEATURES: 14.5″ and 16″ FN cold hammer forged barrels Mid-length gas system Chrome lined 5.56mm NATO chamber HP & MP tested Fabrique national production Spike’s tactical custom barrel profile Barrel tapers from .680″ to .655″ under the handguards .750″ at the gas block .650″ at the muzzle 1/2×28 threaded muzzle Laser engraved under the handguards with the following: ST FN MIL-B-11595E CHF 5.56 NATO 1/7 M249 CL HP MPBENEFITS: Cold hammer forged barrel provides excellent durability and accuracy Mid-length gas system allows for a smoother operating carbine Light Mfg: Spikes Tactical

Click Here to Buy Now

Tti Intl Ar-15/M16 Buffer Springs

(5.0)


Buy Tti Intl Ar-15/M16 Buffer Springs

We found a great deal on the Tti Intl Ar-15/M16 Buffer Springs for only $14.99 at Brownells.

Genuine, Mil-spec quality springs for the AR-15/M-16 that wear out, break, or just get lost. Great for creating your own emergency parts kits. Mfg: Tti Intl SPECS: Springs – steel, music wire or stainless steel wire. Parts sold 5 per pack.

Click Here to Buy Now

Sporting Conversions M16/Ar-15 Takedown Tools

(4.0)


Buy Sporting Conversions M16/Ar-15 Takedown Tools

We found a great deal on the Sporting Conversions M16/Ar-15 Takedown Tools for only $7.95 at Brownells.

High-impact plastic tools drive out the front and rear takedown pins or help get the magazine catch out from your M16/AR-15 without scratching or marring the metal. Pushtool for the takedown pins comes in two versions: a bench model or a handy key ring model. Magcatch tool compresses the spring to make removal of the magazine catch easier. Mfg: Sporting Conversions SPECS: High-impact plastic, black.

Click Here to Buy Now

Les Baer Custom Ar-15 National Match Bolt Carrier

(4.5)


Buy Les Baer Custom Ar-15 National Match Bolt Carrier

We found a great deal on the Les Baer Custom Ar-15 National Match Bolt Carrier for only $255.99 at Brownells.

Machined to National Match specifications with additional surface area that improves carrier/receiver alignment for smoother operation, more consistent bolt lockup. Features a hard chromed and fluted exterior surface that keeps more lubrication around the carrier to reduce wear and friction. Machined hammer ramp prevents damage to titanium firing pins. 1 ounce additional weight compared to standard carriers gives reliable cycling and feeding with heavy competition loads. Hard chromed inside surfaces provide su-perior gas seal. Drop-in, requires no additional fitting. Slickside manufactured without ejection port cover release or forward assist notches; use only in receiver Mfg: Les Baer Custom SPECS: Machined 8620 steel. Hardened to Rc 58. Includes hard chromed key.

Click Here to Buy Now

Double Star Car-15/M4 Mil-Spec Receiver Extension

(4.0)


Buy Double Star Car-15/M4 Mil-Spec Receiver Extension

We found a great deal on the Double Star Car-15/M4 Mil-Spec Receiver Extension for only $30.99 at Brownells.

Machined aluminum receiver extension tube has the correct 1.145″ O.D. to accept an M4-style adjustable carbine buttstock. Six precision-machined notches on the underside provide plenty of options for setting length-of-pull. Perfect for a custom build, installing a mil-spec stock on a civilian carbine, or updating a fixed-stock rifle with an adjustable M4 stock. Machined from a lightweight aluminum extrusion then hardcoat anodized for extra strength, and dry film lube-coated inside for smooth movement of the buffer and buffer spring. Requires carbine recoil spring and buffer, lock ring, and receiver plate, all available separately. Mfg: Double Star SPECS: Aluminum, hardcoat anodized, matte black. 7 7/8″ (20cm) long, 1.145″ O.D.

Click Here to Buy Now

Dpms Firearms Llc Ar-15/M16 Carbon Fiber Free-Float Tube

(4.5)


Buy Dpms Firearms Llc Ar-15/M16 Carbon Fiber Free-Float Tube

We found a great deal on the Dpms Firearms Llc Ar-15/M16 Carbon Fiber Free-Float Tube for only $89.99 at Brownells.

Lightweight carbon fiber free-float forend gives your rifle a fast-handling profile and keeps the barrel cool, even during sustained fire. Distinctive-looking, smooth surface won’t snag on clothing or gear, and lets your hand shift position easily for fast target transitions. Free-float design eliminates handguard-induced stress on barrel for maximum accuracy. Included barrel nut must be glued to tube with the supplied epoxy bonding agent. Mfg: Dpms Firearms Llc SPECS: Tube – Carbon fiber, black. Barrel nut Aluminum, anodized, black. 2″ (5.1cm) O.D. 1.8″ (4.6cm) I.D. Rifle 12 1/2″ (31.8cm) length. 8.2 oz. (233g) weight. Carbine 7 1/4″ (18.4cm) length. 6.1 oz. (173g) weight.

Click Here to Buy Now

Magpul Ar-15/M16 Miad Modular Grip Kits

(4.0)


Buy Magpul Ar-15/M16 Miad Modular Grip Kits

We found a great deal on the Magpul Ar-15/M16 Miad Modular Grip Kits for only $34.15 at Brownells.

MIssion ADaptable (MIAD) modular grip system with interchangeable inserts lets you find the grip configuration that fits your hand size and mission requirements. All models come with main grip body and detachable rubber core in cap for rattle-free internal storage of three spare rounds of .223/5.56 ammo. Additional cores for storing batteries and other items are available separately, below. Front- and backstrap inserts slide on easily, yet snap firmly into place and require no glue or screws to stay put. Basic Kit comes with one straight and two different beavertail backstrap inserts, plus straight and finger-ledge frontstrap inserts. Mfg: Magpul SPECS: Reinforced molded polymer, Black, Dark Earth, or Foliage Green.

Click Here to Buy Now

Links