Archive

Archive for February, 2014

Smith Enterprise Ar-15/M16 Carbine Stock Wrench

(5.0)


Buy Smith Enterprise Ar-15/M16 Carbine Stock Wrench

We found a great deal on the Smith Enterprise Ar-15/M16 Carbine Stock Wrench for only $29.99 at Brownells.

Long handled wrench gives quicker and easier removal, or installation of collapsible stocks. Firmly grasps the receiver extension nut without damage; no need to use a separate breaker bar. Convenient size for carrying in range bag or tool box. Mfg: Smith Enterprise SPECS: Heat-treated, 17-4 stainless steel, black oxide finish. 9″ (22.8cm) long. 7″ (17.7cm) handle.

Click Here to Buy Now

Dpms Firearms Llc Ar-15/Ar-Style .308 Upper Receiver Block

(4.5)


Buy Dpms Firearms Llc Ar-15/Ar-Style .308 Upper Receiver Block

We found a great deal on the Dpms Firearms Llc Ar-15/Ar-Style .308 Upper Receiver Block for only $45.99 at Brownells.

Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250″ diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers. Mfg: Dpms Firearms Llc SPECS: Nylon, white. AR-15 – 7” (17.8cm) long, 1 3/4” (4.5cm) wide, 2-7/8″ (7.3cm) high. DPMS .308 – 7-3/8″ (18.7cm) long, 1-7/8″ (4.8cm) wide, 3” (7.6cm) high. Fits DPMS Panther AR-style .308 receivers.

Click Here to Buy Now

Tactical Springs Llc Ar-15/M16/Car-15/M4 Spring Reliability Kit

(4.0)


Buy Tactical Springs Llc Ar-15/M16/Car-15/M4 Spring Reliability Kit

We found a great deal on the Tactical Springs Llc Ar-15/M16/Car-15/M4 Spring Reliability Kit for only $23.95 at Brownells.

Premium-quality buffer spring helps ensure consistent, dependable operation for tens of thousands of compression cycles. Perfect for the high-volume tactical or competition shooter who needs a finely tuned spring that delivers its full power as reliably on the 50,000th shot as it did on the first. Made from chromium-silicon steel alloy selected specifically for its hardness, heat resistance, and ability to withstand high stresses-the same alloy used for valve springs on automobile engines. Cryogenically treated to relieve internal stress, and surface impregnated with proprietary Plate+ molybdenum disulfide lubricating coating. Carbine model for CAR-15/M4 available in Standard Weight th Mfg: Tactical Springs Llc SPECS: Cryo-treated chrome silicon alloy. Carbine fits CAR-15/M4 carbine and AR-15/M16 fitted with M4-type collapsible buttstock. A2 Rifle fits AR-15/M16 rifle fitted with fixed stock using A1/A2 receiver extension tube.

Click Here to Buy Now

Norgon Ar-15/M16 Ambi-Catch? Tool

(4.5)


Buy Norgon Ar-15/M16 Ambi-Catch? Tool

We found a great deal on the Norgon Ar-15/M16 Ambi-Catch? Tool for only $6.95 at Brownells.

Convenient, tool gives you the leverage to keep the magazine release button completely depressed while removing the magazine catch. No more pinched, numb fingers or awkward balancing with a pen or plastic drift punch. You can hold the rifle and press down on the button with one hand and unscrew the catch with the other. Perfect for installing the Norgon Ambi-Catch, or for removing and reinstalling the fact ory catch during maintenance-as long as your rifle has the factory release button. One-piece construction of tough, solvent- and oil-resistant molded polymer. Fits easily in range bag, tool pack, or pocket. Mfg: Norgon SPECS: Molded polymer in Black, Flat Dark Earth, or O.D. Green. Fits AR-15/M16/CAR-15/M4 with factory magazine release button.

Click Here to Buy Now

Brownells Ar-15 Detent Takedown Springs

(4.0)


Buy Brownells Ar-15 Detent Takedown Springs

We found a great deal on the Brownells Ar-15 Detent Takedown Springs for only $1.99 at Brownells.

Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replacement springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks. Mfg: Brownells SPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS).

Click Here to Buy Now

Truglo Ar-15/M16 Brite-Site

(4.5)


Buy Truglo Ar-15/M16 Brite-Site

We found a great deal on the Truglo Ar-15/M16 Brite-Site for only $89.95 at Brownells.

TFO technology combines the brightness of fiber optics with the glowing properties of tritium to produce a highly visible, bright green dot that keeps you on target, day or night. Radial designed fiber optic rod with tritium tube bends 90 degrees around a machined steel base to keep the sight protected and as compact as possible. Included, steel wrench makes installation easy and allows precise elevation adjustments. Directly replaces sight post in mil-spec front sight housing; spring with retaining nut holds adjustments tight and keeps sight from shaking loose during sustained fire. Mfg: Truglo SPECS: Steel, blued base with fiber optic/tritium rod. .42” (1.1cm) long, .13” (3.3mm) wide, .35” (8.9mm) high. Includes sight, sight wrench, and installation dowel.

Click Here to Buy Now

M16 Clinic Ar-15/M16 Pigtail Gas Tube

(4.0)


Buy M16 Clinic Ar-15/M16 Pigtail Gas Tube

We found a great deal on the M16 Clinic Ar-15/M16 Pigtail Gas Tube for only $108.99 at Brownells.

Extra-length tube lengthens the gas pressure curve to help prevent bolt bounce, short-stroke and feeding jams. Helps prevent cycling problems common to carbines and pistols. Slows bolt carrier to improve feeding reliability and reduce wear and battering. Gives softer recoil impulse, decreases cyclic rate in full-auto fire. Fits under free float tubes and handguards. Carbine fits all 10 inch to 16 inch barrels. Pistol fits 7.5 inch barrels only. Mfg: M16 Clinic SPECS: Stainless steel, cryo treated.

Click Here to Buy Now

Dewey Ar-15/M16 Pivot Pin

(4.0)


Buy Dewey Ar-15/M16 Pivot Pin

We found a great deal on the Dewey Ar-15/M16 Pivot Pin for only $5.99 at Brownells.

Genuine AR-15/M16 parts made to military specifications by a government contractor. These often- replaced parts are supplied in individual bags. Mfg: Dewey SPECS: Pins, steel.

Click Here to Buy Now

Noveske Rifleworks Llc Ar-15/M16 Switchblock

(4.5)


Buy Noveske Rifleworks Llc Ar-15/M16 Switchblock

We found a great deal on the Noveske Rifleworks Llc Ar-15/M16 Switchblock for only $199.99 at Brownells.

Adjustable gas block reduces gas flow to ensure reliable function during single-shot operation and when using sound suppression devices. Helps reduce felt recoil and minimize carbon buildup inside the receiver for less frequent cleaning without compromising reliability. Three-position selector drum adjusts easily with the included wrench. Suppressed position reduces back pressure to safe levels when using noise-limiting devices. Unsuppressed position allows normal weapon operation. Off position enables single-shot operation, preventing spent cartridge ejection and reducing muzzle concussion. Replaces factory gas block and tube; clamps securely around the barrel with two steel Allen head scre Mfg: Noveske Rifleworks Llc SPECS: 17-4 stainless steel, nitride finish, matte black. Fits AR-15/M16 chambered in 5.56mm with .750″ O.D. barrel at gas port. Requires free-floated barrel and handguard that does not cover the gas block; will not fit under standard plastic or railed handguards. Gas tu

Click Here to Buy Now

Double Star Ar-15/M16 Picatinny Rail Gas Block

(4.5)


Buy Double Star Ar-15/M16 Picatinny Rail Gas Block

We found a great deal on the Double Star Ar-15/M16 Picatinny Rail Gas Block for only $29.99 at Brownells.

rrel with a unique three-point attachment system to provide a solid accessory mounting platform and ensure proper gas system alignment for reliable cycling. Precision machined from high-grade 6061 T6 aluminum for an ideal combination of strength and low weight, with an integral MIL-STD 1913 Picatinny rail on the topside. Anchors to the barrel with a pair of hex-head setscrews on the underside, plus a third screw on top to ensure a superior gas seal and resist unwanted movement that can impair gas system function. Streamlined design has clean, good-looking, angular lines with all exposed edges radiused to eliminate sharpness. Mil-spec hardcoat anodized for superior surface strength and wear r Mfg: Double Star SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. All models 1.875″ (cm) long. Rail heights are measured from top of barrel to top of rail. .625″ – 1″ (2.5cm) wide, 1.5″ (3.8cm) overall height, .600″ (1.5cm) rail height. 3 oz. (84g) weight. .750″ – 1″

Click Here to Buy Now

Links