Free-float handguard with four MIL-STD 1913 Picatinny rails is engineered specifically for AR-15s with gas piston systems. The Piston Omega Rail features additional internal clearance for weapons with piston systems and a removable top rail for access to piston components. Installs in minutes with absolutely no permanent modifications to weapon. Two-piece design allows installation without removing the gas block, using only a common flat-head screwdriver and the included hex key. Tighten the four Allen-head screws against the barrel nut with the hex key to eliminate movement and align the extended top rail with the receiver rail for an exceptionally long expanse of accessory mounting space. Mfg: Daniel Defense SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes mounting screws, Allen key, and instructions. Approximately 63/8″ (16.2cm) long, 17/8″ (4.8cm) wide, 2 1/2″ (6.4cm) high. Top Rail 7″ (17.8cm) long. 8 oz. (226g) wt. 7.0 Mil-Spec fit
Thumb-saving, lightweight magazine loader provides fast, painless 30-round magazine loading in less than 13 seconds. Accepts 10-round stripper clips or loose rounds for easy loading of 10-, 20-, and 30-round magazines, and is capable of unloading a 30-round magazine in 15 seconds. Ambidextrous, grooved thumb slide provides a non-slip grip for right- or left-hand loading. Constructed of durable, reinforced polymer for dependable operation under extreme field conditions. Fits all AR-15/M16 metal and plastic magazines. Mfg: Maglula Ltd. SPECS: Polymer, black. 5-15/16″ (13.5cm) long, 1-1/8″ (2.8cm) wide, 1-3/16″ (3cm) high. 1.2 oz. (34g) weight. Accepts 10-round stripper clips or loose rounds. Fits all AR-15/M16 magazines.
Features: Attaches to most standard and “F” front sight bases Functions with Picatinny and Universal lights Positions the light at 12 o’clock Constructed from 6061 T6 aluminum Military Type III Hard Anodized Simple installation; hooks onto the front of the front sight base from the side and is slid down Mount is secured by two self-locking set screwsBenefits: By mounting the light at 12 o’clock, shadowing from the barrel is reduced, if not eliminated Any shadows present will be directed downwards, instead of to the operators sides Unobstructed sight picture when used with Surefire X300, Streamlight TLR1 and Mfg: Battle Comp Enterprises, Llc.
Stainless steel shims are perfect to help restore accuracy and reduce noise in older AR-15/M16 rifles. H-T-D (Hammer-Trigger-Disconnect) kit helps eliminate side-to-side play of these trigger group parts to provide consistent trigger operation. Prevents parts from walking on the pivot pins. Mfg: Power Custom SPECS: Stainless steel, heat-hardened. Pak of 10.
Bolt-on Picatinny rails give you almost unlimited accessory mounting options for your Yankee Hill Customizable Free-Float Tube or Customizable Two-Piece Handguard. Choose only as much rail as you need to avoid cluttering handguard with unused rail space. 6″ rail is a full-length rail for Carbine-length handguards, 9 1/4″ rail is the correct length for Specter tubes, and 12″ rail is full-length for Rifle tubes. Mfg: Yankee Hill Machine Co., Inc. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Fits Yankee Hill Customizable Free-Float and Two-Piece Handguards. Mounting screws included.
Efficient, easy-to-use nylon web sling features a high strength, polycarbonate quick-release buckle that attaches to most weapon platforms and connects directly to your sling. Universal buckle design accepts all current weapon attachment stubs allowing use of a single sling with multiple weapons. Features rip-cord pull adjustment for instant height adjustment without taking your eyes off the target. ASP-V is an adjustable rig mount sling that attaches directly to your shoulder strap and LBV/Plate carrier or Pals/Molle webbing using the D-ring. Compact ambidextrous design allows either side weapon shouldering without tangles or interference. Contains one rig mounted quick-release adapter. ASP Mfg: Gear Sector SPECS: Nylon webbing, black. Polycarbonate buckles, black. ASP-V – 21” (2.5cm) long x 1” (1.5cm) wide, 4” (2.5cm) long stub. ASP – 34 1/2” (2.5cm) long x 1” wide, 4” stub.
Three individual magazine pouches capable of holding Mil-Spec 5.56mm 20- or 30-round magazines are mounted in this one piece rig. Features a 2″ wide adjustable nylon loop with two vertical Velcro straps. Entire unit is mounted to a contoured hip/leg bracket with interior foam padding to protect your leg from excess rubbing during shooting exercises. Fully adjustable tension screws hold magazines firmly in place without the need for flaps to prevent excess noise and provide smooth, fast reloads. A second, 2″ adjustable nylon strap fastens with a belt clip to hold the unit firmly in place around your leg below. Mfg: Blade-Tech SPECS: Injection molded polymer, black matte finish. Top Velcro straps with fit belts up to 3″ (7.6cm) wide.
Tough, molded polymer magazine pouch lets you carry an extra 20- or 30-round AR-15/M16 magazine, including a Magpul PMAG, on your duty belt behind any standard pistol magazine pouch. Provides a single ammunition management point, saves valuable belt space, and ensures you have a critical rifle reload with you when you need it. Open-top design and the adjustable, spring-loaded tension system holds the magazine securely, while allowing fast extraction under stress. Set screws let you adjust mag retention force and prevent shifting on belt. Can be worn in the vertical or horizontal position on duty belts up to 2 1/4″ wide. Mfg: Brownells SPECS: Molded polymer, black. 4 1/4″ (10.8cm) tall, 3 1/2″ (8.9cm) wide, 1 3/4″(4.4cm) thick. Fits mil-spec 20- and 30-round AR-15/M16 magazines and similar-dimensioned commercial magazines, including PMAGs.
Dummy bolt carrier enables realistic dry-fire weapon handling during training without risk of accidental discharge. Lets the student safely train with his actual duty weapon simply by replacing the factory bolt/carrier assembly with this inert replica made of high-visibility yellow polymer. Preserves full carrier and trigger function for jam-clearing and reset drills, plus realistic training in CQB tactics, room-clearing, disarming, and weapon retention. More economical, easier to store, and more realistic than full-size dummy training weapons. Ideal for law enforcement, professional firearm training schools, competition shooters, and firearm dealers. Remove factory bolt/carrier and insert t Mfg: Blade-Tech SPECS: Injection-molded polymer, high-visibility yellow.
Drop-in replacement for factory magazine release button retains the magazine in the lower receiver to conform with California Code of Regulations 978.20(a). Prevents rapid magazine removal, so your gun can meet the requirement for a permanent, non-detachable magazine. Installs in minutes. Magazine capacity can be no more than 10 rounds. Laws and regulations can change at any time; the user is responsible for making sure his rifle stays compliant. Mfg: Assault Planet SPECS: 7075 T6 aluminum, hardcoat anodized, black. Screws – carbon steel, black. Fits AR-15 and clones, Sig 556, and AR-style .308 rifles including ArmaLite AR-10, Bushmaster, Hess, Iron Cross, and J.D. Machine. Includes mounting hardware and instructions.