Archive

Archive for November, 2013

Brownells Ar-15/M16 Sight Wrenches

(4.5)


Buy Brownells Ar-15/M16 Sight Wrenches

We found a great deal on the Brownells Ar-15/M16 Sight Wrenches for only $9.99 at Brownells.

Even tho’ you’re supposed to be able to adjust these sights with nothing more than a round of ammo, folks who’ve tried know it’s just not that simple. This decidedly handy little Sight Wrench does the job, quick and easy. Mfg: Brownells SPECS: 1-3/8″ (3.5cm) long x 3/4″ (19.0mm) dia. Blued steel. Models for A1, five-prong (adjusts front and rear) and A2, four-prong.

Click Here to Buy Now

Daniel Defense Ar-15/M16/Ar-Style .308 7.62 Lite Rail Barrel Nut Wrench

(4.0)


Buy Daniel Defense Ar-15/M16/Ar-Style .308 7.62 Lite Rail Barrel Nut Wrench

We found a great deal on the Daniel Defense Ar-15/M16/Ar-Style .308 7.62 Lite Rail Barrel Nut Wrench for only $10.00 at Brownells.

Barrel Nut Wrench for installing AR-15/M16/AR-Style .308 7.62 Lite Rail. Mfg: Daniel Defense

Click Here to Buy Now

Hahn Precision Ar-15 9mm Conversion Block

(4.0)


Buy Hahn Precision Ar-15 9mm Conversion Block

We found a great deal on the Hahn Precision Ar-15 9mm Conversion Block for only $200.00 at Brownells.

One-piece, machined aluminum block converts AR-15 lower receiver to 9mm. Compatible with all, Colt-type, 9mm upper receivers, the feed ramp is cut for reliable feeding with all types of ammo, including hollow point and frangible ball. Roller retention device holds block securely in receiver, prevents accidental release. Hardened steel ejector, feed ramp and bolt hold open give long service life; last-round-hold-open feature on bottom-loading model works when used with Colt magazines. Also works with modified UZI magazines but last-round-hold-open will not function. No receiver modification required. Top-Loading Block installs from the top of the lower receiver and Botto Mfg: Hahn Precision SPECS: Aluminum, black, matte finish.

Click Here to Buy Now

Troy Industries, Inc. Ar-15/M16 Modular Combat Grip

(4.5)


Buy Troy Industries, Inc. Ar-15/M16 Modular Combat Grip

We found a great deal on the Troy Industries, Inc. Ar-15/M16 Modular Combat Grip for only $59.99 at Brownells.

Deeply knurled vertical forend grip provides a comfortable, secure grasp for outstanding recoil control and ultra-fast pointability. Modular design lets you choose a secure, full-palm configuration, or by unscrewing and removing the center section, a low-profile “stubby” grip. Full-length, spring-loaded locking bar, plus front and rear rail lugs ensure a rock-solid installation on any Picatinny rail. Flush-fit crossbolt to minimize risk of snagging on other gear. Rugged, all-aluminum construction with waterproof O-ring seals to keep contents of the roomy internal storage compartment dry. Mfg: Troy Industries, Inc. SPECS: Aluminum, hardcoat anodized, Black or Dark Earth. 4 1/2″ (11.43 cm) long, 3″ (7.62 cm) long in stubby configuration, 1 1/4″ (3.2 cm) O.D. 5.9 oz. (167g) weight. Fits Picatinny rail systems.

Click Here to Buy Now

Cmmg Ar-15/M16 Stainless Steel Anti-Tilt Follower

(4.0)


Buy Cmmg Ar-15/M16 Stainless Steel Anti-Tilt Follower

We found a great deal on the Cmmg Ar-15/M16 Stainless Steel Anti-Tilt Follower for only $9.99 at Brownells.

Stainless steel follower rides evenly in all four corners of the magazine body to eliminate tilting, so the ammo stack stays fully supported for smooth, reliable feeding. High-lubricity, polished finish helps reduce drag on spot welds, seams, and rough patches in the mag body, even under inconsistent spring pressure. Easy to install-drops in and secures to top of standard mag spring. Use with CMMG Braided Wire Magazine Spring (found elsewhere in catalog) for added reliability. Mfg: Cmmg SPECS: Stainless steel, natural, polished finish. Available in 3-Paks.

Click Here to Buy Now

Falcon Industries/Ergo Grips Ar-15/M16 Ergo Grip~ Full Rail Cover

(4.5)


Buy Falcon Industries/Ergo Grips Ar-15/M16 Ergo Grip~ Full Rail Cover

We found a great deal on the Falcon Industries/Ergo Grips Ar-15/M16 Ergo Grip~ Full Rail Cover for only $39.05 at Brownells.

Completely covers the rail and contoured to give a rounded shape to Picatinny or Weaver-style rails. Grippy synthetic rubber snaps securely over rail and provides an excellent grasping surface. Long model has raised diamond-plate texture. Short model has two raised gripping ridges. Mfg: Falcon Industries/Ergo Grips SPECS: Synthetic rubber polymer, black or Coyote Brown. Long model is 5 3/4″ (14.6cm) long x 1 1/2″ (3.8cm) wide. Short model is 1 3/4″ (4.5cm) long x 1 1/2″ wide; sold in 12 pak.

Click Here to Buy Now

Troy Industries, Inc. Ar-15/M16 Alpha Rails

(4.5)


Buy Troy Industries, Inc. Ar-15/M16 Alpha Rails

We found a great deal on the Troy Industries, Inc. Ar-15/M16 Alpha Rails for only $159.99 at Brownells.

Building off the TRX Extreme design, the Alpha Rail utilizes a new low-profile locking mechanism, which offers unparalleled strength and rigidity. The Alpha Rail disperses heat and runs cooler than other close to the barrel rail systems. Machined from 6061-T6 hardened aircraft aluminum and finished in MIL-SPEC Type III hard coat anodizing. Comes with three detachable rails and all mounting hardware. Works with standard AR15/M16 barrel nut. 11 and 13 inch models available with built-in front sight post. Mfg: Troy Industries, Inc. SPECS: Length 9″, 11″, 13″, and 15″ available. Finish Black MIL-SPEC Type III hard coat anodizing. Material 6061 T6 aluminum.

Click Here to Buy Now

Pro Mag Ar-15/M16 9mm Magazine Adapter

(4.0)


Buy Pro Mag Ar-15/M16 9mm Magazine Adapter

We found a great deal on the Pro Mag Ar-15/M16 9mm Magazine Adapter for only $53.50 at Brownells.

Magazine well insert converts a standard .223/5.56 AR-15 lower receiver to accept Colt SMG and modified Uzi-type 9mm magazines for use with a dedicated 9mm upper receiver. Friction-fit, top-down installation with steel tabs that fit over the top of the lower receiver to keep the adapter in place. Durable polymer body with Parkerized steel fixtures for added support. Bolt hold-open after last shot with Colt magazines only. Mfg: Pro Mag SPECS: Polymer body, black. Steel feed ramp, bolt stop, ejector, Parkerized, matte black. Armorer installation recommended. Fits Mil-Spec AR-15/M16 lower receivers; Olympic arms rifles require ejector removal.

Click Here to Buy Now

Sierra Precision Ar-15/M16 Spr Pistol Grip

(4.0)


Buy Sierra Precision Ar-15/M16 Spr Pistol Grip

We found a great deal on the Sierra Precision Ar-15/M16 Spr Pistol Grip for only $24.99 at Brownells.

Repositions the hand for a comfortable grasp and improved trigger finger location. Hand filling design with thumbrest and palmswell provide enhanced gripping endurance. Matte surface gives good, non-slip purchase. Mfg: Sierra Precision SPECS: Black, glass filled Polypropylene, matte finish. Fits AR-15, AR-10 and AR-25 rifles. Right-hand only.

Click Here to Buy Now

Boonie Packer Products Ar-15/M16 Improved Redi-Mag

(4.5)


Buy Boonie Packer Products Ar-15/M16 Improved Redi-Mag

We found a great deal on the Boonie Packer Products Ar-15/M16 Improved Redi-Mag for only $79.99 at Brownells.

Don’t lose precious seconds in competition or combat fumbling for a spare magazine during a reload. Rugged, all-steel speed loading system clamps directly to the receiver of any AR-15/M16 rifle or carbine and securely holds a second, fully loaded magazine alongside the mag well for super-fast mag changes. More reliable and easier to use than improvised methods, like taping two magazines together, that can cause malfunctions at critical moments. Closed-top design protects the spare mag from rain, dirt, dust, and debris and prevents the top round from jumping forward under recoil. Independent release system lets you drop the spare mag and the mag in the weapon separately to allow tactica Mfg: Boonie Packer Products SPECS: Steel, Parkerized finish, dark gray, with reinforced molded polymer BCE and spacer. Approximately 3 1/2″ (8.9cm) long, 2 1/2″ (6.4cm) wide, 2 3/4″ (7cm) high. 8.4 oz. (234g) weight. Fits AR-15/M16/M4 rifles and carbines.

Click Here to Buy Now

Links