Archive

Archive for August, 2013

Grsc Car-15 Car Ambi Sling Adapter

(4.0)


Buy Grsc Car-15 Car Ambi Sling Adapter

We found a great deal on the Grsc Car-15 Car Ambi Sling Adapter for only $9.99 at Brownells.

Steel, sling adapter replaces the standard issue, receiver plate to provide a rock solid attachment point for fast handling, tactical slings on CAR-15 rifles. Ambidextrous slots accept 1 1/4″ wide webbing, rings accommodate carry straps with snap fasteners. Allows the sling to be switched from right or left side of receiver in seconds. Keeps sling tangle-free and provides the proper balance and stability for hands-free carry. Mfg: Grsc SPECS: Steel, Parkerized finish. 2-9/16″ (6.5cm) long, 2-1/16″ (5.2cm) high, 3/32″ (2.4mm) thick. Fits CAR-15 rifles.

Click Here to Buy Now

Tti Intl Ar-15/M16 Bolt Catch Spring

(5.0)


Buy Tti Intl Ar-15/M16 Bolt Catch Spring

We found a great deal on the Tti Intl Ar-15/M16 Bolt Catch Spring for only $1.99 at Brownells.

Genuine, Mil-spec quality springs for the AR-15/M-16 that wear out, break, or just get lost. Great for creating your own emergency parts kits. Mfg: Tti Intl SPECS: Springs – steel, music wire or stainless steel wire. Parts sold 5 per pack.

Click Here to Buy Now

Global Military Gear Ar-15/M16 Quad-Rail Handguard

(4.5)


Buy Global Military Gear Ar-15/M16 Quad-Rail Handguard

We found a great deal on the Global Military Gear Ar-15/M16 Quad-Rail Handguard for only $55.99 at Brownells.

Four-rail Picatinny handguard expands the versatility of any tactical AR-15/M16/M4 carbine by allowing you to mount a wide array of lights, lasers, flip-up sights, vertical grips, and bipods. True, drop-in replacement for factory plastic handguard clamps securely to the barrel nut and front handguard cap with four steel cap screws that let you easily adjust the tension to prevent unwanted movement. Requires no permanent alterations to rifle; remove Quad Rail at any time and reinstall factory guard. Provides a full load of features that tactical shooters want, including white numeric index markings in slots to ensure repeatability of accessory positions, and large cooling vents to help preven Mfg: Global Military Gear SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 6 1/4″ (15.9cm) overall length. Fits AR-15/M16/M4 with carbine-length gas system and retention system for USGI plastic handguard. Rail Covers – Synthetic rubber, black. 3 included. May be cut to length.

Click Here to Buy Now

Mecharmor Armor Defense System Ar-15/M16/Ar-Styles .308 Tacops-1 Charging Handle

(4.5)


Buy Mecharmor Armor Defense System Ar-15/M16/Ar-Styles .308 Tacops-1 Charging Handle

We found a great deal on the Mecharmor Armor Defense System Ar-15/M16/Ar-Styles .308 Tacops-1 Charging Handle for only $109.99 at Brownells.

Extended ambidextrous charging handle is large enough to clear oversized sniper/target optics. Easy to operate with minimal body movement in confined spaces, under concealment, or even in the prone position. Lets you to maintain a “high ready” rifle position for constant visual contact with the target during mag changes, jam clearance, and other high-stress CQB situations. Wide, ergonomically shaped grasping surface provides an ultra-secure purchase and extra leverage for normal charging, yet won’t interfere with the forward assist or oversized optics. Dual-mode latch has a second release button in the center rear of the handle for easy operation with the firing hand. Heavy Mfg: Mecharmor Armor Defense System SPECS: 7075 T6 aluminum, hardcoat anodized, black. .223 fits AR-15/M16/M4. .308 fits AR-style .308 rifles.

Click Here to Buy Now

Dpms Firearms Llc Ar-15 Detachable Rear Sight

(4.5)


Buy Dpms Firearms Llc Ar-15 Detachable Rear Sight

We found a great deal on the Dpms Firearms Llc Ar-15 Detachable Rear Sight for only $69.99 at Brownells.

Mil-Spec, A-2-style, rear sight gives tactical rifles an accurate, reliable backup to scopes and electronic sights. Adjustable for windage and elevation; uses two, steel, thumb screws that lock the sight to Picatinny or Weaver-style bases with precise return to zero. Lets you determine correct sight settings, then remove sight for safe storage. Correct height for issue front sight when mounted on flattop receiver. Mfg: Dpms Firearms Llc SPECS: Aluminium base, steel sight parts, parkerized finish.

Click Here to Buy Now

The Mako Group Ar-15/M16 Forend Grip/Spare Mag Holder

(4.5)


Buy The Mako Group Ar-15/M16 Forend Grip/Spare Mag Holder

We found a great deal on the The Mako Group Ar-15/M16 Forend Grip/Spare Mag Holder for only $44.99 at Brownells.

Convenient two-in-one vertical grip locks securely to any forend with an underside accessory rail to provide secure, on-board storage of a spare magazine for exceptionally fast magazine changes. Drop the spent mag from the gun, release the spare by hitting the oversized, release button, and move it the short distance to the magwell without breaking the horizontal plane. Gently curved finger grooves provide a secure grip that improves recoil control, especially during sustained rapid fire. Helps operator maintain a steady hold during extended periods in the ready position. Stippling molded into the finger grooves helps you maintain a firm grip even with wet hands. Slides onto any Pictainny-ty Mfg: The Mako Group SPECS: Reinforced molded polymer composite, black. Fits Picatinny-type accessory rail.

Click Here to Buy Now

Hahn Precision Ar-15/Car-15 Low Profile Tactical Rails

(4.5)


Buy Hahn Precision Ar-15/Car-15 Low Profile Tactical Rails

We found a great deal on the Hahn Precision Ar-15/Car-15 Low Profile Tactical Rails for only $60.00 at Brownells.

One-piece rails cut to true, MIL-STD 1913 Picatinny spec match the look and feel of your standard, A4 flattop while adding 1/2″ of height for proper cheek weld with optics and tactical sights. Streamlined design encloses the receiver rail for a “built-in” appearance and eliminates protruding hardware that can snag on brush, slings, and clothing. Nylon-tipped, Allen screws, tapped through the top, deliver downward pressure between the receiver rail slots for exceptional holding power. Precision machined from strong, yet lightweight 6061-T651 billet aluminum, then hardcoat anodized with a tough, Teflon-impregnated finish to Mil-A-8625 for extra strength and superior wear resistance.Low Mfg: Hahn Precision SPECS: Rail – 6061-T651 billet aluminum, hard black anodized. 71/4″ (18.4 cm) long x 1/2″ (1.3 cm) high. 4.2 oz. (119 g) wt. Fits mil-spec flattop receivers. BUIS – Steel, matte gray Parkerized finish. Center of aperture is 17/16″ (3.65cm) above top of existing

Click Here to Buy Now

Brownells Ar-15 Complete Assembly Guide With Parts

(4.5)


Buy Brownells Ar-15 Complete Assembly Guide With Parts

We found a great deal on the Brownells Ar-15 Complete Assembly Guide With Parts for only $69.99 at Brownells.

All kits come with The AR-15 Complete Assembly Guide by Walt Kuleck. 154 pages. 6″ x 9″. Softbound. Ideal book for anyone who wants to correctly assemble and disassemble AR-15s. Hundreds of photographs accompany text that describes everything about the parts, tools, and skills necessary to work on this gun. Divided into upper and lower receiver sections for easy reference during projects. Gives tips for success and pitfalls to watch for.AR-15 PARTS KIT & ASSEMBLY GUIDE Kits contains A-1 Sight Drum Pin, A-2 Windage Knob pin, bolt catch pin, bolt catch spring,5 packs of (3) bolt gas rings, buffer retainer spring, CAR buffer spring STD buffer spring, ejection port co Mfg: Brownells

Click Here to Buy Now

Dpms Firearms Llc Ar-15/M16 Xm177 Flash Hiders

(4.5)


Buy Dpms Firearms Llc Ar-15/M16 Xm177 Flash Hiders

We found a great deal on the Dpms Firearms Llc Ar-15/M16 Xm177 Flash Hiders for only $16.99 at Brownells.

FEATURES: 1/2×28 threads Matte black finish Replicates appearance of original XM177 “car-15” or “commando” M16 carbines BL-20 is designed for permanent attachment to 11.5″ barrels BL-20A is designed to slipped over 16″ barrelsBENEFITS: Great flash hiders for a retro carbine build Quick and easy addition to give your rifle a classic look Six port flash hiders reduce muzzle flash, especially useful in low light conditions When pinned and welded, BL-20 brings 11.5″ barrels up to the legal length Mfg: Dpms Firearms Llc

Click Here to Buy Now

F A Enterprises Ar-15 Barrel Thread Alignment Tool

(4.5)


Buy F A Enterprises Ar-15 Barrel Thread Alignment Tool

We found a great deal on the F A Enterprises Ar-15 Barrel Thread Alignment Tool for only $14.99 at Brownells.

Make sure that your die is located precisely before you start cutting metal. Stainless steel alignment tool fits in the barrel and keeps your die perfectly aligned when threading for flash suppressors and muzzle brakes. 1″ long shank inserts in the barrel to provide an accurate pilot point based on the bore position. 1/2″-28 threaded guide portion is 1/2″ long to give you plenty of room to get the die started correctly. Mfg: F A Enterprises SPECS: Stainless steel, in-the-white. 1 1/2″ (3.7cm) long, 1/2″-28 tpi. Fits AR-15 barrels with .224” bore size.

Click Here to Buy Now

Links