Archive

Archive for July, 2013

Double Star Ar-15/M16 Twang Buster

(4.5)


Buy Double Star Ar-15/M16 Twang Buster

We found a great deal on the Double Star Ar-15/M16 Twang Buster for only $4.99 at Brownells.

Low-friction Delrin disk fits on the end of the buffer spring, opposite the buffer, and stops the annoying “twang” of the buffer hitting the rear of the receiver extension during recoil. Quick, easy installation, with no permanent alterations to gun. Simply remove buffer and spring, insert Twang Buster, then reinstall buffer and spring. Mfg: Double Star SPECS: Machined Delrin thermoplastic, black. Fits A2 rifle and M4-style carbine buffer spring/receiver extension tubes.

Click Here to Buy Now

Troy Industries, Inc. Ar-15/M16 Medieval Muzzle Brake

(4.5)


Buy Troy Industries, Inc. Ar-15/M16 Medieval Muzzle Brake

We found a great deal on the Troy Industries, Inc. Ar-15/M16 Medieval Muzzle Brake for only $42.99 at Brownells.

Muzzle attachments specifically designed to enhance your CQB effectiveness install on any AR-15 rifle or carbine with 1/2″-28 tpi muzzle threads. Aggressive, diamond-shaped teeth aid in effective less-lethal muzzle strikes during hand-to-hand combat, while wide strike face lessens danger of a penetrative wound on contact. Also serves as a stand-off device for body contact shots. Precision formed from 8620 steel, heat hardened to resist erosion by combustion gases, with a tough, parkerized finish that matches most black/dark gray rifle finishes. Muzzle Brake helps you stay on target by venting gases upward to counteract muzzle rise for fast follow-up shots; improves control and accu Mfg: Troy Industries, Inc. SPECS: Steel, parkerized, matte black finish. .860″ (2.2cm) O.D., 2 1/2″ (6.4cm) long. 3.1 oz. (81g) wt. Fits barrels with 1/2″-28 tpi right-hand threads.

Click Here to Buy Now

Combat Application Tools, Inc. Ar-15/M16 Cat M4tool

(4.0)


Buy Combat Application Tools, Inc. Ar-15/M16 Cat M4tool

We found a great deal on the Combat Application Tools, Inc. Ar-15/M16 Cat M4tool for only $29.99 at Brownells.

Compact, easy to carry pocket tool performs four separate cleaning functions to help you quickly restore the critical bolt/carrier tolerances that can be compromised by carbon buildup after prolonged shooting. Use as a bolt scraper, firing pin cleaner, patch holder for swabbing the bolt recess, and scraper for removing carbon in the carrier. Plus, the center of the tool is equipped with a 1/4″ hex head recess to use as a driver. Carry a few 1/4″ driver bits, and you’re all set to make adjustments that keep your rifle tuned and shooting. 7.62 model works with 7.62 AR rifles such as AR10 or DPMS. Mfg: Combat Application Tools, Inc. SPECS: Machined steel casting. 3 1/2″ (8.8cm) long. 1 oz. (28.35g) weight. Includes shirt pocket card/carrier with illustrated instructions. 7.62 model works with 7.62 AR rifles such as AR10 or DPMS.

Click Here to Buy Now

Daniel Defense Ar-15/M16 Aimpoint Micro Mount

(4.0)


Buy Daniel Defense Ar-15/M16 Aimpoint Micro Mount

We found a great deal on the Daniel Defense Ar-15/M16 Aimpoint Micro Mount for only $66.00 at Brownells.

Streamlined, minimal-profile mount clamps to flattop receiver rail and provides secure, correct-height attachment for Aimpoint Micro H-1, R-1, and T-1 red dot optics on flattop AR-15/M16 receivers. Positions optic for co-witnessing with factory iron sights in the lower 1/3 of the Micro’s field of view. A wide viewing tunnel through the base allows the use of other types of backup sights as well. Precision machined from 6061-T6 aluminum billet, then mil-spec Type III hardcoat anodized for added strength and resistance to surface wear. Clamps securely to MIL-STD 1913 Picatinny rail with two slot-head crossbolts. Stainless steel self-locking thread inserts help prevent the bolts fro Mfg: Daniel Defense SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 17/8″ (4.8cm) long, 1 1/4″ (3.2cm) wide, 13/8″ (3.5cm) overall height. Positions the bottom of the sight 1.035″ above the receiver rail. 1.7 oz. (48g) weight. Fits Aimpoint Micro H-1, R-1, and T-1 optics

Click Here to Buy Now

Rail Vise Technologies Ar-15/M16 Rail Vise System

(4.0)


Buy Rail Vise Technologies Ar-15/M16 Rail Vise System

We found a great deal on the Rail Vise Technologies Ar-15/M16 Rail Vise System for only $65.99 at Brownells.

Custom platform for flattop AR-15/M16 rifles securely supports the upper and lower receivers for cleaning or light maintenance. Holds the gun so both hands are free, and positions it so you can easily get to hard-to-reach areas. Barrel support tower slides to adjust for any barrel length, and fits a standard or oversized bull barrel. Self-contained System includes the barrel tower, a full-length base, lower receiver block that fits into the mag well, and an upper block that clamps to the receiver rail. Component kit includes only the barrel tower and receiver blocks, for direct mounting to the top of your workbench. Mfg: Rail Vise Technologies SPECS: Base Aluminum, anodized, black, with steel rails. 28 3/4″ long, 5 1/2″ wide, 3/4″ thick. Tower/Blocks – Fiber-filled injection-molded polymer resin, black. Fits any AR-15/M16 lower receiver; accepts flattop upper receiver only.

Click Here to Buy Now

Trijicon Ar-15/M16 Ta01nsn 4×32 Special Forces

(4.5)


Buy Trijicon Ar-15/M16 Ta01nsn 4x32 Special Forces

We found a great deal on the Trijicon Ar-15/M16 Ta01nsn 4×32 Special Forces for only $1059.94 at Brownells.

Includes integral peep rear with tritium dot front sight for fast, close range sighting; TA51 mounting bracket easily mounts the ACOG Special Forces on flat top receivers; Includes “bikini”-style scope covers and yellow center, range finding reticle to match M4A1 Carbine NSN 1240-01-412-6608. Mfg: Trijicon SPECS: 7070-T6 alum. housing, black, anodized. 5.8″ (14.7cm) long, 9.9 oz. (280 g) wt. 4X magnification, 32mm objective lens.

Click Here to Buy Now

Bushmaster Firearms Int.Llc. Ar-15 Lower Receiver Parts Kit

(4.5)


Buy Bushmaster Firearms Int.Llc. Ar-15 Lower Receiver Parts Kit

We found a great deal on the Bushmaster Firearms Int.Llc. Ar-15 Lower Receiver Parts Kit for only $72.99 at Brownells.

Complete kit of all the internal parts, plus the pistol grip, allows you to build or refurbish on the small-pin lower of your choice. Unified set of components designed to work together helps ensure proper fit and smooth operation. Engagement surfaces on trigger and hammer are precision ground to give you a crisp letoff without sacrificing reliability. Pistol grip is injection molded from high-impact polymer and offers the streamlined contours of a standard A2-style grip, with a ledge for the second finger, molded in checkering, and deep grooves on the backstrap for improved control under recoil. Separate triggerguard molded from the same high-density polymer is included. Mfg: Bushmaster Firearms Int.Llc. SPECS: Steel, blued finish on metal parts; injection-molded polymer, black grip. Includes trigger, hammer, disconnector, safety selector lever, bolt catch, magazine catch, magazine button, pistol grip, front and rear pivot pins, and all necessary pins, dentents, and springs.

Click Here to Buy Now

Tti Intl Ar-15/M16 Reduced Power Action Kit

(4.5)


Buy Tti Intl Ar-15/M16 Reduced Power Action Kit

We found a great deal on the Tti Intl Ar-15/M16 Reduced Power Action Kit for only $4.99 at Brownells.

Three-spring kit lightens heavy trigger pull and smoothes rough letoff for improved accuracy. Conveniently drops in to the lower receiver and requires no modifications to your gun. Mfg: Tti Intl SPECS: Stainless steel, spring steel. Kit includes hammer, trigger, and disconnect springs. Fits AR-15/M16.

Click Here to Buy Now

Les Baer Custom Ar-15 Bolt/Carrier Group

(4.5)


Buy Les Baer Custom Ar-15 Bolt/Carrier Group

We found a great deal on the Les Baer Custom Ar-15 Bolt/Carrier Group for only $39.99 at Brownells.

Complete, .223/5.56mm AR-15 bolt and carrier assembly comes with all the parts, fully assembled, and ready to go. Drop it in your AR, check headspace, and you’re ready to shoot. Precision-machined in Les Baer’s state-of-the-art manufacturing facility from durable, high-grade 8620 nickel-chromium-molybdenum alloy steel billet. Mil-spec dimensions ensure proper fit and function in a wide variety of OEM and aftermarket upper receivers. All components, including bolt and gas key, have a uniform matte black Parkerized finish for extra strength and corrosion resistance. Interiors of the carrier and carrier key are hard-chromed for additional durability and to aid in clockwork reliabili Mfg: Les Baer Custom SPECS: 8620 carbon steel, Parkerized, matte black finish. Fits mil-spec AR-15 upper receiver. Carrier does not have provision for auto sear trip.

Click Here to Buy Now

Yankee Hill Machine Co., Inc. Ar-15/M16 Forearm End Cap

(4.5)


Buy Yankee Hill Machine Co., Inc. Ar-15/M16 Forearm End Cap

We found a great deal on the Yankee Hill Machine Co., Inc. Ar-15/M16 Forearm End Cap for only $19.50 at Brownells.

Screws into the front of any Yankee Hill free-float handguard to provide added protection for the end of the forearm. Hides view of the barrel from the front of the handguard for a clean, finished look, and keeps large debris out. Cooling ports allow rapid escape of barrel heat and promote airflow under the handguard. Install using supplied threadlocker. Mfg: Yankee Hill Machine Co., Inc. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. 15/16″ (2.5cm) I.D.

Click Here to Buy Now

Links