Archive

Archive for April, 2013

Cmmg Cmmg Ar-15 .22 Lr Conversion Kit

(4.5)


Buy Cmmg Cmmg Ar-15 .22 Lr Conversion Kit

We found a great deal on the Cmmg Cmmg Ar-15 .22 Lr Conversion Kit for only $169.99 at Brownells.

Drop-in .22 LR conversion system comes fully assembled and ready to install in any semi-auto AR-15 to help you practice critical shooting skills with economical rimfire ammunition. Concentrate on improving grip, sight alignment, trigger pull, and other skills without burning up expensive, centerfire ammo. Installs in seconds and requires no gunsmithing or permanent alterations to your rifle. Simply replace the bolt and carrier with the conversion unit, load up the included magazine with high-velocity round-nose .22 LR ammo, and you’re ready to shoot. Precision machined from high-grade carbon or stainless steel for reliable function in any mil-spec AR-15 rifle or carbine chambered in 5. Mfg: Cmmg SPECS: Kits include conversion unit, plus one (1) smoke-tinted 26-rd or 10-rd magazine. Conversion Unit Carbon steel, Parkerized, matte black finish (CS), or stainless steel, natural polished finish (SS). Designed for high-velocity, round nose .22 LR ammunition only. Fits semi-auto AR-15 rif

Click Here to Buy Now

Precision Reflex, Inc. Ar-15/M16 Upper Receiver Vise Block

(4.5)


Buy Precision Reflex, Inc. Ar-15/M16 Upper Receiver Vise Block

We found a great deal on the Precision Reflex, Inc. Ar-15/M16 Upper Receiver Vise Block for only $54.95 at Brownells.

Heavy duty, machined aluminum vise block lets you clamp an AR-15/M16 upper receiver in a bench vise without risk of marring the finish or distorting the receiver from over-tightening. Dual-use design allows the receiver to be positioned top side up or, if it’s a flattop, upside down; either way, the vise grasps the block and never touches the receiver. One side of the block fits in the underside of the receiver and is held securely in place with two, steel, T-pins inserted through the takedown pin holes, so you can install optics, perform thorough cleaning, and do other work on the exterior. Or, slide a flattop receiver rail into the grooves on the other side of the block and tighten t Mfg: Precision Reflex, Inc. SPECS: Body – Aluminum, hardcoat anodized, matte black. 7″ (17.8cm) long, 1 1/4″ (3.2cm) wide, 1 1/4″ high. Pins Steel, black oxide finish. Fits AR-15/M16/M4 and clones with .250″ diameter takedown pin holes.

Click Here to Buy Now

Cmmg Ar-15/M16 Gas Piston Conversion Kit

(4.5)


Buy Cmmg Ar-15/M16 Gas Piston Conversion Kit

We found a great deal on the Cmmg Ar-15/M16 Gas Piston Conversion Kit for only $379.99 at Brownells.

Drop-in conversion kit replaces the standard direct impingement gas system with a reliable, positive cycling piston system. Updates the AR to the type of operating system used on advanced weapons like the FN SCAR, Heckler & Koch G36, and HK416, as well as the highly reliable, classic FAL and AK-series rifles. Makes weapon run cooler, smoother, and more reliably, with less wear and easier maintenance. Because the gas no longer vents inside the receiver, fouling and carbon buildup are greatly reduced, requiring less frequent disassembly for cleaning. Less fouling and lower operating temperatures mean reduced wear on bolt, carrier, and receiver interior for fewer malfunctions caused by worn Mfg: Cmmg SPECS: Piston Tube, Bolt Carrier, Handguard Retainer Cap Steel, black oxide finish. Piston Steel, hard-chromed. Gas Block Aluminum, hardcoat anodized, matte black. Includes mounting hardware and installation instructions. Does not include bolt assembly. Carbine kit fits semi-

Click Here to Buy Now

Falcon Industries/Ergo Grips Ar-15/M16 Lower Receiver Spring Kit

(4.5)


Buy Falcon Industries/Ergo Grips Ar-15/M16 Lower Receiver Spring Kit

We found a great deal on the Falcon Industries/Ergo Grips Ar-15/M16 Lower Receiver Spring Kit for only $6.99 at Brownells.

All the factory-weight springs needed to finish building up a stripped lower receiver or refurbish an existing lower to like-new function. Replace worn, corroded, or fatigued springs before they fail-inexpensive insurance against game-ending stoppages caused by spring failure during competition or tactical operations. Kit includes springs for trigger, hammer, disconnector, safety selector, magazine catch, bolt catch, buffer retainer, and takedown pin detents. Mfg: Falcon Industries/Ergo Grips SPECS: Spring steel.

Click Here to Buy Now

Wolff Ar-15/M16 Extra Power Extractor Spring

(4.5)


Buy Wolff Ar-15/M16 Extra Power Extractor Spring

We found a great deal on the Wolff Ar-15/M16 Extra Power Extractor Spring for only $10.99 at Brownells.

Stronger spring prevents “extractor bounce” during rapid semi-auto or full-auto fire. Provides extra force against case rim to give AR-15 rifles and carbines reliable extraction from a dirty chamber; ensures fired case is completely extracted and ejected from gun. Recommended for use with black, carbine, extractor spring insert. Mfg: Wolff

Click Here to Buy Now

Daniel Defense Ar-15/M16 Ez Car? 7.0 Carbine Handguard

(4.0)


Buy Daniel Defense Ar-15/M16 Ez Car? 7.0 Carbine Handguard

We found a great deal on the Daniel Defense Ar-15/M16 Ez Car? 7.0 Carbine Handguard for only $157.00 at Brownells.

Lightweight aluminum handguard easily replaces the plastic factory handguard and gives you four MIL-STD 1913 Picatinny rails for mounting accessories with absolutely no permanent alterations to weapon. The 16-slot top rail and 15-slot side and bottom rails are T-marked for precise repeatability in mounting optics, bipods, vertical grips, lights, and other tactical gear. Extended top rail eliminates gap between it and receiver rail. Mounts to the delta ring and handguard cap of rifles with carbine-length gas systems. No gunsmithing, no special tools required. Four setscrews lock the EZ CAR firmly in place to prevent shifting under recoil. Mfg: Daniel Defense SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 7 1/4″ (18.4cm) long, 27/16″ (6.2cm) wide, 27/16″ high. 9.0 oz. (255g) wt.

Click Here to Buy Now

Advanced Armament Ar-15/M16/Ar10 Blackout Flash Hiders

(4.0)


Buy Advanced Armament Ar-15/M16/Ar10 Blackout Flash Hiders

We found a great deal on the Advanced Armament Ar-15/M16/Ar10 Blackout Flash Hiders for only $89.99 at Brownells.

Three equally spaced, horizontal slots efficiently reduce muzzle flash and help prevent the blinding effect of a bright flash in complete darkness for improved target acquisition during night ops. Flat, smooth muzzle face with rounded corners prevents hang-ups and allows unencumbered weapon deployment. Two machined flats allow simple installation with a standard-size wrench. Precision machined from heat-treated 17-4 stainless steel and given a proprietary SCARmor coating for high surface hardness and durability. Fits 5.56 NATO (.223) caliber, threaded barrels only. Available with Ratchet Mount, 51 Tooth, for attachment of AAC Suppressors. 51T Flash Hiders function with all AAC 51T su Mfg: Advanced Armament SPECS: 17-4 stainless steel, SCARmor finish, matte black. For 5.56 NATO (.223) caliber. 1/2″-28 tpi. 2-1/8″ (5.4cm) long x 7/8″ (2.2cm) dia. 2.9 oz. (82g) weight. 51T, 5.56mm 1/2-28 or 7.62mm 5/8-24. Weight 4.3 oz. Length 2.58 inches. Length ad

Click Here to Buy Now

Cmmg Cmmg Ar-15/M16 Complete Upper Receiver, 22lr Ss Action

(4.0)


Buy Cmmg Cmmg Ar-15/M16 Complete Upper Receiver, 22lr Ss Action

We found a great deal on the Cmmg Cmmg Ar-15/M16 Complete Upper Receiver, 22lr Ss Action for only $449.95 at Brownells.

Mil-Spec M-4 Upper receiver with ceramic finish Stainless Steel action .22 Long Rifle caliber 16 inch W.A.S.P. carbon steel barrel 1 in 16 inch twist Mil-Spec 1/2 X 28 threaded muzzle with A1 flash hinder Picatinny railed low profile front sight base Live round extraction Anti-jam charging handle Low profile single rail gas blockHaving a dedicated training upper receiver like CMMG Upper Complete Sierra .22 LR 16 Inch SS Action just makes sense and when it saves you ammunition costs, it makes dollars and cents. The Mil-Spec M-4 upper receiver has a ceramic finish and a Stainless Steel .22 Long Rifle caliber action for many years of troubl Mfg: Cmmg SPECS: Mil-Spec M-4 upper receiver with ceramic finish, stainless steel action, .22 Long Rifle caliber, 16 inch W.A.S.P. carbon steel barrel, 1 in 16 inch twist, Mil-Spec 1/2 x 28 threaded muzzle with A1 flash hinder, Picatinny railed low profile front sight base, live round extraction, anti-jam cha

Click Here to Buy Now

Brownells Ar-15/M16 Tactical Magazine

(4.5)


Buy Brownells Ar-15/M16 Tactical Magazine

We found a great deal on the Brownells Ar-15/M16 Tactical Magazine for only $17.99 at Brownells.

We added two of the most popular aftermarket accessories to our ultra-reliable chrome silicon spring magazines, so you get a customized magazine ready to run hard right out of the bag. The curved 30-round model comes with the Magpul Self-Leveling Follower. This follower won’t tilt as rounds are fed into or stripped from the magazine, and its self-lubricating polymer composition helps ensure smooth movement in the mag body for easier loading and ultra-smooth feeding. For an added tactical or competitive edge, the 30-round Tactical Magazine is also available with the Magpul Ranger floorplate to ensure lightning-fast magazine changes. An easy-to-grasp finger loop aids in fast, positi Mfg: Brownells SPECS: Aluminum body, hard-anodized, dry-lube coating. Dry-lube coated chrome silicon spring. Teflon-reinforced plastic follower. Available in Military Gray. Ranger – includes stainless steel floorplate overmolded with Santoprene synthetic rubber.

Click Here to Buy Now

Brownells Ar-15 Upper Receiver Cleaning Kit

(4.5)


Buy Brownells Ar-15 Upper Receiver Cleaning Kit

We found a great deal on the Brownells Ar-15 Upper Receiver Cleaning Kit for only $19.99 at Brownells.

Make short work of cleaning heavily fouled AR-15 upper receivers, right down to the locking lug recess. Specially sized and shaped bronze receiver brush and wool mop quickly loosen stubborn carbon residue from the bolt carrier way and locking lug recess. Standard Kit for cleaning upper receiver, bolt carrier way. Deluxe Kit features a longer rod and a chamber brush that lets you thoroughly clean the bolt carrier way, plus the chamber and locking lug recess. Check out the video demonstration of the AR-15 Upper Receiver Cleaning Kit. Mfg: Brownells SPECS: Standard Kit includes bronze receiver brush, wool mop, and brass cleaning rod with plastic handle. Overall length – 6 1/2″ (16.5cm) long, threaded 5/16″-27 tpi. Deluxe Kit includes bronze receiver brush, wool mop, AR-15 chamber brush, thread adapter and brass cleaning rod with p

Click Here to Buy Now

Links