Archive

Archive for January, 2013

Magpul Ar-15/M16 Acs? Buttstock

(4.5)

Buy Magpul Ar-15/M16 Acs? Buttstock

We found a great deal on the Magpul Ar-15/M16 Acs? Buttstock for only $104.45 at Brownells.

Adaptable Carbine/Storage (ACS) stock is a drop-in replacement for standard USGI M4 collapsible stock that gives the tactical operator extra storage options, a secure, comfortable cheekweld, and an advanced dual-locking lever. Smooth, streamlined exterior contours prevent snagging on clothing, sling, or vegetation, and help ensure fast exits from vehicles without snagging on gear. Removable battery storage compartments run the full length of the extra-wide comb and hold 2 AA or 3 CR-123 batteries, while providing a wide, contoured area for an exceptionally solid, comfortable cheekweld. Secure molded rubber caps keep water and dust out of compartments and face the rear of the stock for easy r Mfg: Magpul SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green or Foliage Green. 77/8″ (20cm) OAL, 5 1/4″ (13.3cm) high. 13.6 oz. (385g) weight. Mil-Spec fits mil-spec 1.14″ O.D. carbine buffer tubes. Commercial fits commercial 1.17″ O.D. carbine buffer tubes.

Click Here to Buy Now

J P Enterprises Ar-15/M16 16″ Barrel Kits

(4.0)

Buy J P Enterprises Ar-15/M16 16

We found a great deal on the J P Enterprises Ar-15/M16 16″ Barrel Kits for only $607.05 at Brownells.

FEATURES: 16″ JP Supermatch barrel kits Kits include 16″ barrel, adjustable gas block, Bennie Cooley compensator, gas tube, and jp enhanced bolt JP Supermatch barrels are turned from 416 stainless steel, lead lapped, air-gauged and cryogenically treated 223 Wylde chamber 1-8 twist Mid-length gas system .750″ at the gas block Lightweight contour Works with ar15/m16 rifles 1/2-28 threads Included JP enhanced bolt is precision machined from SAE 9310 steel JP enhanced bolt is individually headspaced to the included barrel Compensator is seamlessly blended into the barrel Available with a Mfg: J P Enterprises

Click Here to Buy Now

Maglula Ltd. Ar-15/M16 Benchloader

(4.5)

Buy Maglula Ltd. Ar-15/M16 Benchloader

We found a great deal on the Maglula Ltd. Ar-15/M16 Benchloader for only $509.99 at Brownells.

Heavy-duty, polymer loader makes it easy for you to load a 10-, 20- or 30-round magazine in less than 30 seconds. Load hundreds of magazines a day without the pain, pinched fingers, or bruises of hand-loading-perfect for military/law enforcement armorers, shooting ranges, and any high-volume AR-15 shooter. Standard model accepts USGI-type AR-15/M16 (NATO STANAG 4179) magazines; Universal also accepts other AR-style magazines, including HK 416, SAR-80, Beretta AR-70/90, plus Magpul PMAG, Thermold, Orlite, and SIG Sauer polymer mags. Foolproof design, with only one moving part, makes it impossible to load magazines incorrectly and requires no maintenance. Feeds rounds into the magazine without Mfg: Maglula Ltd. SPECS: Machined polymer, black. Stainless steel magazine retention bar. 21 1/2” (54.6cm) long x 5 1/2” (14cm) wide. Both models accept 10-, 20-, and 30-round USGI-type AR-15/M16 magazines. Universal also accepts HK 416, SAR-80, Beretta AR-70/90, Magpul PMAG, Thermold, Orlite, SIG Saue

Click Here to Buy Now

Tapco Weapons Accessories Ar-15/M16 Intrafuse Handguard

(4.5)

Buy Tapco Weapons Accessories Ar-15/M16 Intrafuse Handguard

We found a great deal on the Tapco Weapons Accessories Ar-15/M16 Intrafuse Handguard for only $39.99 at Brownells.

Modular, snap-on carbine handguard offers a comfortable, secure hand-hold and integral Picatinny rails to give the operator exceptional accessory mounting flexibility without sacrificing weapon controllability. Comfortable, hand-filling contours, molded-in grasping ridges, and a non-slip textured surface ensure a secure grip for superior weapon control that aids speedy target acquisition and quick recovery for follow-up shots. Picatinny rails at the 3, 6, 9, and 12 o’clock positions provide plenty of real estate for mounting vertical grips, laser sights, flashlights, bipods, and other tactical accessories in a custom configuration to meet the shooter’s needs. Removable panels cov Mfg: Tapco Weapons Accessories SPECS: Reinforced injection-molded polymer composite, black or Dark Earth. 6 1/2″ (16.5cm) OAL, 2 3/4″ (7cm) wide, 2-7/8″ (7.3cm) high with panels installed. Fits AR-15/M16/M4 rifles with carbine-length gas system, Delta ring, and round handguard cap.

Click Here to Buy Now

Hahn Precision Ar-15/Car-15/Cav-15 Pistol Caliber Buffer

(4.5)

Buy Hahn Precision Ar-15/Car-15/Cav-15 Pistol Caliber Buffer

We found a great deal on the Hahn Precision Ar-15/Car-15/Cav-15 Pistol Caliber Buffer for only $64.99 at Brownells.

Drop-in replacement for factory buffer shortens stroke and reduces recoil on pistol caliber AR-15 conversions with collapsible M4 carbine-type stocks. Extra weight behind carrier reduces cyclic rate for improve controllability, feeding, and extraction on full-auto carbines. Self-contained unit with long head consists of long-wearing, precision-machined, cold-rolled Parkerized steel exterior, fully enclosed 8 oz. lead insert, and polyurethane bumper. Will not work with rifle caliber uppers. Installation of this buffer is mandatory on Cavalry Arms CAV-15 Mk II receivers converted to .45 ACP with the Hahn Precision Grease Gun Adapter to prevent receiver damage. Mfg: Hahn Precision SPECS: Cold-rolled steel exterior, Parkerized, matte dark gray; lead insert; polyurethane bumper. 3-11/16″ (9.4cm) long. Fits rifles and carbines with pistol caliber upper receiver and collapsible M4 carbine-type stock.

Click Here to Buy Now

Arredondo Ar-15/M16 Oversize Magazine Release Button

(4.0)

Buy Arredondo Ar-15/M16 Oversize Magazine Release Button

We found a great deal on the Arredondo Ar-15/M16 Oversize Magazine Release Button for only $27.99 at Brownells.

Oversized magazine release button allows fast mag changes in competition or combat, in daylight or total darkness. Serrated surface and slightly angled configuration draws your finger immediately to the button and enables positive, no-slip release in all weather conditions. Two-piece design replaces the factory mag release button with no gunsmithing required. Mfg: Arredondo SPECS: Molded polymer, black. 5/8” (1.6 cm) long x 5/8” wide.

Click Here to Buy Now

Brownells Ar-15/M16/Ar-Style .308 Bolt/Carrier Pins

(4.0)

Buy Brownells Ar-15/M16/Ar-Style .308 Bolt/Carrier Pins

We found a great deal on the Brownells Ar-15/M16/Ar-Style .308 Bolt/Carrier Pins for only $3.99 at Brownells.

Precision machined replacement pins let you repair or complete a new-build AR bolt and bolt carrier. Perfect for custom builds using a bolt and carrier obtained from different sources. Firing Pin Retaining Pin is made from chrome-plated steel and based on the original “push-pin” design by Eugene Stoner. Steel Cam Pins have a dry-lube finish to reduce friction and wear. Available for AR-15 and AR-Style .308. Mfg: Brownells SPECS: Firing Pin Retaining Pin 1045 steel, chrome-plated. Cam Pin 4340 steel, heat treated to Rc 45-48, Parkerized, dry-lube coated.

Click Here to Buy Now

C. J. Weapons Acc. Ar-15/Ar-Style .308 Chamber Maid Kits

(5.0)

Buy C. J. Weapons Acc. Ar-15/Ar-Style .308 Chamber Maid Kits

We found a great deal on the C. J. Weapons Acc. Ar-15/Ar-Style .308 Chamber Maid Kits for only $14.99 at Brownells.

The perfect kit for fast, thorough cleaning of the chamber and hard-to-reach lug recesses in the barrel extension of AR-15 and AR-style .308 rifles. Each kit contains a detachable handle, a flexible steel braid, rubber coated cleaning rod, and a heavy duty bronze bore brush with a wider-diameter section of stainless steel bristles to scrub the lug recesses. Compact enough to fit comfortably in a pocket or range bag and ideal for quick cleaning jobs at the range or for thorough cleanings at home. Check out the video demonstration of the Chamber Maid Kits. Mfg: C. J. Weapons Acc. SPECS: Flexible, rubber-coated, braided steel 10” (25.4cm) rod, plastic handle, bronze/stainless steel brush. Models for AR-15 and AR-style .308 rifles. Accepts brushes with 8-32 thread.

Click Here to Buy Now

Daniel Defense Ar-15/M16 Fixed Backup Front Sight

(4.5)

Buy Daniel Defense Ar-15/M16 Fixed Backup Front Sight

We found a great deal on the Daniel Defense Ar-15/M16 Fixed Backup Front Sight for only $57.00 at Brownells.

Lightweight, streamlined backup sights are built on the K.I.S.S. principle to ensure the tactical operator has a reliable, always-deployed sighting option if the main optic fails. One-piece design slides easily on a MIL-STD 1913 rail and clamps securely with a single machine screw. Rounded edges and recessed attachment screws resist snagging on other gear. Lightweight, streamlined backup sights are built on the K.I.S.S. principle to ensure the tactical operator has a reliable, always-deployed sighting option if the main optic fails. One-piece design slides easily on a MIL-STD 1913 rail and clamps securely with a single machine screw. Rounded edges and recessed attachment screws resist snaggi Mfg: Daniel Defense SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Front Sight – 1″ (2.5cm) long, 1-1/8″ (2.8cm) wide, 1 3/4″ (4.5cm) high from top of receiver rail to top of sight housing. 1.1 oz. (30g) weight. For proper regulation with A1.5 or USGI A2-type rear sight, must

Click Here to Buy Now

Brownells Ar-15 Hammer Trigger Jig With Dry Fire Block

(4.0)

Buy Brownells Ar-15 Hammer Trigger Jig With Dry Fire Block

We found a great deal on the Brownells Ar-15 Hammer Trigger Jig With Dry Fire Block for only $55.99 at Brownells.

Easy-to-use fixture allows full assembly and testing of any AR-15 trigger prior to installation. Aluminum angle bracket with extended length trigger pins secures trigger group to side of lower receiver. Provides a clear, unobstructed view of the sear, hammer, and disconnector engagement points while under normal spring tension. Takes the guesswork out of achieving that perfect trigger pull. Durable, Delrin dry fire block drops into magazine well for safe test firing. Great for trigger modifications, checking adjustments before installation, or for use as an armorer’s training aid. A “must-have” for AR-15 trigger work. Mfg: Brownells SPECS: Bracket – Aluminum with black, protective finish. Dry Fire Block – Delrin. Fits .154″ dia. pin holes. Includes instructions.

Click Here to Buy Now

Links