Archive

Archive for November, 2012

Midwest Industries, Inc. Ar-15/M16 Ss Series Bipod Adapter

(4.5)


Buy Midwest Industries, Inc. Ar-15/M16 Ss Series Bipod Adapter

We found a great deal on the Midwest Industries, Inc. Ar-15/M16 Ss Series Bipod Adapter for only $37.99 at Brownells.

Bolt-on hardware lets you maximize accessory mounting options while adding minimal weight and bulk. Bipod adapter lets you install a Harris bipod on any SS Series handguard. Mfg: Midwest Industries, Inc. SPECS: Base Machined 6061 T6 aluminum, hardcoat anodized, matte black. Adapter – Steel stud, black oxide finish. 2″ (5.1cm) long, 1″ (2.5cm) wide, 7/16″ (1.1cm) thick. 1.4 oz. (39g) weight. Fits SS Series handguards only. Mounting hardware included.

Click Here to Buy Now

J P Enterprises Ar-15/M16 Low-Mass Recoil Buffer

(4.5)


Buy J P Enterprises Ar-15/M16 Low-Mass Recoil Buffer

We found a great deal on the J P Enterprises Ar-15/M16 Low-Mass Recoil Buffer for only $49.95 at Brownells.

Lightweight, aluminum alloy buffer reduces the reciprocating mass of the operating system to reduce the overall recoil impulse felt by the shooter. Helps the competitive shooter keep the sights on the target for precise follow-up shot placement and tight groups. Designed for competition rifles with full-length receiver extension tubes and lightweight titanium or aluminum alloy bolt carriers, as well as any conventional mil-spec carrier where reduced mass is desired. Combine with a lightweight carrier to virtually eliminate felt recoil and increase bolt velocity without significantly impairing reliability. Mfg: J P Enterprises SPECS: Aluminum, anodized, red. 3 oz. (86g) weight. Fits AR-15 chambered in .223/5.56mm with rifle-length receiver extensions for fixed buttstock. For competition only; not recommended for duty weapons.

Click Here to Buy Now

J P Enterprises Ar-15/M16 Jp Le-M Handguard

(4.0)


Buy J P Enterprises Ar-15/M16 Jp Le-M Handguard

We found a great deal on the J P Enterprises Ar-15/M16 Jp Le-M Handguard for only $246.95 at Brownells.

FEATURES: Free float 12″ handguard Constructed of extruded aluminum Compatible with various piston systems Fully integrated 12 o’clock Mil-Std 1913 rail Radially holes are drilled and tapped to accommodate 2″ and 4″ JP accessory rails One 2″ and one 4″ accessory rail included Hard coat anodized matte black finish Includes barrel nut, handguard tube, lock ring, and two 10-32 swivel studs with washers Spanner and pin type armorers wrench needed for installation Loctite 263 or equivalent recommended for installationBENEFITS: Extruded aluminum free float tube provides a rigid and solid Mfg: J P Enterprises

Click Here to Buy Now

Smith Enterprise Ar-15/M16 Direct Connect Compensator

(4.5)


Buy Smith Enterprise Ar-15/M16 Direct Connect Compensator

We found a great deal on the Smith Enterprise Ar-15/M16 Direct Connect Compensator for only $71.99 at Brownells.

 Easy to install compensator substantially reduces felt recoil and muzzle flip for smooth shooting, better control, and improved accuracy. Screws directly to any barrel with standard 1/2″-28 tpi muzzle threads no crush washer or peel washer required. Twelve recessed gas ports redirect combustion gases to counteract recoil force. Made from the same 8620 steel bar stock as the popular Vortex Flash Eliminator, and heat-treated to a surface hardness of Rc 60 to resist gas erosion. Rounded edges give a streamlined profile and minimize risk of snagging on other gear. Accepts Smith Enterprise quick-detach sound suppressors. Mfg: Smith Enterprise SPECS: 8620 steel, Parkerized, matte black finish. 25/16″ (5.9cm) long, .860″ (2.2cm) dia. 3.4 oz. (97g) wt. Fits 5.56mm/.223 barrels with 1/2″-28 tpi threaded muzzles. No washers required.

Click Here to Buy Now

Brownells Ar-15/M16 M4 Barrel Extension

(4.5)


Buy Brownells Ar-15/M16 M4 Barrel Extension

We found a great deal on the Brownells Ar-15/M16 M4 Barrel Extension for only $24.99 at Brownells.

Specifically designed for carbine installations, this is a correct-spec M4 barrel extension with feed ramp and pre-drilled hole for locator pin. Perfect for custom builds, rebarreling jobs, and caliber conversion projects. Integral feed ramp is required for proper chambering in carbine configurations and adds an extra measure of insurance for smooth, reliable feeding in rifles. Fully machined from high-grade 4140 chrome-moly steel for precise fit, strength, and durability. Mfg: Brownells SPECS: 4140 carbon steel, in-the-white.

Click Here to Buy Now

Wolff Ar-15/M16 Service Pak

(4.0)


Buy Wolff Ar-15/M16 Service Pak

We found a great deal on the Wolff Ar-15/M16 Service Pak for only $14.99 at Brownells.

Return the rifle to original Colt factory specifications. Includes extra-power (XP) recoil spring that improves reliability and function. Mfg: Wolff SPECS: Includes one each of the following: bolt catch spring, buffer retainer spring, charging handle latch spring, disconnector spring, dust cover spring, ejector spring, extractor spring, forward assist spring, front sight retainer spring, hammer spring, magazine catch spring, trigger spring.

Click Here to Buy Now

Black Rain Ordance Inc. Ar-15/M16 Oversized Charging Handle

(5.0)


Buy Black Rain Ordance Inc. Ar-15/M16 Oversized Charging Handle

We found a great deal on the Black Rain Ordance Inc. Ar-15/M16 Oversized Charging Handle for only $59.99 at Brownells.

Oversized latch with serrations provides positive grip when charging weapon 7075 T6 aircraft grade aluminum 100% CNC machined to exact tolerances Mil S-8625 Type III Class 2 hard coat black Anodizing with Teflon coating Mil Spec Dimension to match other manufacturers Mfg: Black Rain Ordance Inc.

Click Here to Buy Now

Black Rifle Disease Engineerin Ar-15/M16 Gas Block Pinning Jig

(4.5)


Buy Black Rifle Disease Engineerin Ar-15/M16 Gas Block Pinning Jig

We found a great deal on the Black Rifle Disease Engineerin Ar-15/M16 Gas Block Pinning Jig for only $64.99 at Brownells.

Heavy steel fixture securely holds and aligns a low-profile Vltor gas block to enable precise drilling of a straight or taper pin hole for permanent installation of the block. Can be modified with file or rotary tool to fit other low-profile gas blocks, such as Yankee Hill and Stag Arms. Instructions included. Mfg: Black Rifle Disease Engineerin SPECS: 836 plate steel, black oxide coating. 1″ (2.54cm) long, 2″ (5.08cm) wide, 2 3/8″ (5.99cm) tall. 17.3 oz. (490g) weight.

Click Here to Buy Now

Phase 5 Tactical Ar-15/M16/Ar-Style .308 Winter Triggerguard

(4.0)


Buy Phase 5 Tactical Ar-15/M16/Ar-Style .308 Winter Triggerguard

We found a great deal on the Phase 5 Tactical Ar-15/M16/Ar-Style .308 Winter Triggerguard for only $26.99 at Brownells.

Uniquely shaped, machined aluminum triggerguard provides plenty of clearance to let you operate your rifle with gloves on during cold weather. Drop-in replacement for the factory has an usual “bat wing” shape that helps your rifle stand out visually from the rest of the pack. Larger opening makes this an excellent companion modification for use with the Phase 5 EBRv1 and EBRv2 extended bolt releases. Also fits the DPMS LR-308 and similar AR-style .308 rifles that use an AR-15 type triggerguard. Mfg: Phase 5 Tactical SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Steel roll pin and screw, black.

Click Here to Buy Now

Sog Armory Ar-15/M16 Front Sight Sling Adapter With Rail

(4.5)


Buy Sog Armory Ar-15/M16 Front Sight Sling Adapter With Rail

We found a great deal on the Sog Armory Ar-15/M16 Front Sight Sling Adapter With Rail for only $29.95 at Brownells.

Heat-resistant, graphite sling adapter attaches to the left side your front A2 sight with two screws and securely holds your sling in place. Picatinny rail allows for the mounting of an additional accessory for mission-specific configurations. Adapter installs with no special tools and no permanent modifications to the sight, accepts 1 1/4″ (3.2cm) slings. Mfg: Sog Armory SPECS: Heat-resistant graphite, black. Picatinny rail is 1.5″ (3.7cm) long. Fits A2 front sights.

Click Here to Buy Now

Links