Archive

Archive for October, 2012

Brownells Ar-15/M16 Combination Wrench

(4.5)


Buy Brownells Ar-15/M16 Combination Wrench

We found a great deal on the Brownells Ar-15/M16 Combination Wrench for only $34.99 at Brownells.

An exact duplicate of the original factory/military design so you know it will fit and work. Use for several jobs: to remove the barrel nut; to remove and install old and new flash suppressors; to remove and install the lower receiver extension. Check out the video demonstration of the Brownells AR-15/M16 Combination Wrench. Mfg: Brownells SPECS: Blued steel. 5″ (12.7cm) long x 2″ (5cm) wide x 1/4″ (6.35mm) thick.

Click Here to Buy Now

Pro Mag Ar-15/M16 Flip-Up Front Sights

(4.5)


Buy Pro Mag Ar-15/M16 Flip-Up Front Sights

We found a great deal on the Pro Mag Ar-15/M16 Flip-Up Front Sights for only $89.25 at Brownells.

Machined aluminum, flip-up sights clamp to flattop Picatinny rails for emergency backup sighting if your primary optic fails. Or use alone as reliable “iron” sights that fold down to avoid damage during storage. Lock securely into upright position, while a push-button release prevents accidental lowering if you bump the sight. Can be co-witnessed with non-magnifying red dot and holographic sights. Easily mounts to any MIL-STD 1913 Picatinny rail via a locking bar and slotted, knurled thumbscrew. Gas Block Front Sight clamps to a gas block with a Picatinny rail on top; A2-style front post is adjustable for elevation with 1/4 turns for 1.25″ MOA at 100 yards. Protective & Mfg: Pro Mag SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Crossbolts are steel, phosphate finished, matte black. Overall heights measured from top of base to top of sight. Gas Block Front Sight – 1.7″ (4.3cm) overall height, .8″ (20.3mm) folded height, 1.4″ (3.5cm) wide.

Click Here to Buy Now

Cmmg Ar-15/M16 Dedicated .22 Lr Barrel

(4.5)


Buy Cmmg Ar-15/M16 Dedicated .22 Lr Barrel

We found a great deal on the Cmmg Ar-15/M16 Dedicated .22 Lr Barrel for only $139.99 at Brownells.

M4-contour barrel converts a standard .223/5.56 upper receiver to a dedicated .22 LR upper when used in conjunction with a CMMG, Ciener, or other Atchison-style .22 rimfire conversion kit (sold separately) and magazine (CMMG or Black Dog). Solves the accuracy problems sometimes caused by firing rimfire ammo in the .224″ bore of the centerfire barrel. Comes with a chamber adapter and pre-installed barrel extension with locator pin. Installs on a mil-spec upper receiver using a standard or free-float barrel nut. Requires removal of the conversion unit’s .223/5.56-to-.22 LR chamber adapter, using caution to avoid “springing” the unit’s rails, and replacement with th Mfg: Cmmg SPECS: Chrome-moly steel, black oxide finish on barrel, Parkerized adapter, matte black. 16″ OAL. .750″ O.D. at position where gas port is normally located. 1-16″ twist rifling. 1/2″ x 28 tpi muzzle threads.

Click Here to Buy Now

Surefire Ar-15/M16 60 & 100 Round Magazines

(4.5)


Buy Surefire Ar-15/M16 60 & 100 Round Magazines

We found a great deal on the Surefire Ar-15/M16 60 & 100 Round Magazines for only $90.30 at Brownells.

Ultra-high capacity magazines keep your rifle running longer between mag changes during competition or tactical operations. These magazines meet NATO STANAG 4179 specifications and are compatible with all rifles that accept AR-15/M16/M4 magazines. Less than two standard magazines wide, so they’re easy to hold and handle with one hand. 60-round model fits most dual-mag pouches for 30-round magazines. Weight is centered under the weapon to help you maintain a normal shooting grip and stance. Seats fully loaded on a closed bolt. “Nesting” nylon followers require no lubrication and fully support the round stack to aid in reliable feeding. Cadmium coating on springs reduces friction and resists c Mfg: Surefire SPECS: Aluminum body, hardcoat anodized, matte gray finish. Nylon followers. Cadmium-coated springs. 60-Rd 8.7″ (22.1cm) tall, 1.66″ (4.2cm) wide at base. 6.4 oz. (181g) wt. empty, 2 lbs. (907g) wt. fully loaded. 100-Rd 12.2″ (31cm) tall, 1.66″ wide at base. 9.6 o

Click Here to Buy Now

Mounting Solutions Plus Ar-15 Sightlink Front Sight

(4.5)


Buy Mounting Solutions Plus Ar-15 Sightlink Front Sight

We found a great deal on the Mounting Solutions Plus Ar-15 Sightlink Front Sight for only $49.95 at Brownells.

Fully adjustable, fiber optic, front sight gathers and funnels natural sunlight to create a bright, easy-to-see dot for close-up or long range shooting. Steel, sight blade secures a red fiber optic rod with small and large diameter ends (dots). Custom, detent plunger uses your factory detent spring, and allows easy blade reversal from large dot to small, and back again, without changing the blade height setting. Precise, 5/8″ MOA click adjustments make fine-tuning quick and easy (Mil-Spec is 1 1/4″ MOA per click). Replaces the standard issue, front sight using the provided tools. Includes additional red, green, and amber fiber optic rods. Military model features a standard, Mfg: Mounting Solutions Plus SPECS: Steel, blued. Military – .070″ (1.8mm) wide blade, .040″ (1mm) dia. rod. Match – .060″ (1.5mm) wide blade, .030″ (.75mm) dia. rod. Ultra-Match – .050″ (1.3mm) wide blade, .020″ (.5mm) dia. rod. Includes front sight blade, detent, installation tools, fiber optic rods, and detailed in

Click Here to Buy Now

Brownells Ar-15 Ejection Port Cover Springs

(4.5)


Buy Brownells Ar-15 Ejection Port Cover Springs

We found a great deal on the Brownells Ar-15 Ejection Port Cover Springs for only $0.99 at Brownells.

Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replacement springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks. Mfg: Brownells SPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS).

Click Here to Buy Now

Brownells Ar-15/M16 Lower Receiver Vise Block

(4.0)


Buy Brownells Ar-15/M16 Lower Receiver Vise Block

We found a great deal on the Brownells Ar-15/M16 Lower Receiver Vise Block for only $77.99 at Brownells.

Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won’t be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will not mar or scratch the finish. Check out the video demons Mfg: Brownells SPECS: High-density urethane plastic, black. 5″ (12cm) high, 2 1/4″ (5.7cm) wide, 3/4″ (19cm) thick.

Click Here to Buy Now

Brownells Car-15/M4 Flip-Up Tactical Rear Sights

(4.0)


Buy Brownells Car-15/M4 Flip-Up Tactical Rear Sights

We found a great deal on the Brownells Car-15/M4 Flip-Up Tactical Rear Sights for only $139.99 at Brownells.

Rugged flip-up sights provide instant backup when primary sight fails or weather conditions limit its use. Robust cross-bolt with oversized, slotted hex nut locks clamping block tightly to Picatinny accessory rail for zero sight movement. Clean, low profile design won’t snag on other gear when folded down. All models regulate with mil-spec A2 carbine sights or same-height aftermarket sights-perfect for co-witnessing with non-magnifying red dot and holographic optical sights. Precision machined from hardcoat anodized 6061 T6 aluminum and heat-treated 4140 steel for repeatable settings and the strength to handle the rigors of combat. A2 windage knob on rear sights provides precise Mfg: Brownells SPECS: 6061 T6 aluminum and 4140 steel, matte black. Standard Rear & Tritium Rear Sight – 1-3/8″ (3.5cm) overall length, 1-7/8″ (4.8cm) high (extended), 7/8″ (2.2cm) high (folded). 360 Series Rear – 1-3/8″ overall length, 1-7/8″ high (extend

Click Here to Buy Now

Blindhogg, Inc Ar-15/M16 The Jimmy Plug

(4.0)


Buy Blindhogg, Inc Ar-15/M16 The Jimmy Plug

We found a great deal on the Blindhogg, Inc Ar-15/M16 The Jimmy Plug for only $10.95 at Brownells.

Lightweight, magazine well plug keeps your lower receiver free of contaminants that could compromise reliable function of the weapon. Developed by a soldier to protect the M16 rifle in dusty and other harsh-weather environments. Plug is retained by the magazine catch and effectively seals the bottom of the rifle to help keep fine sand, grit and rain from reaching the bolt, carrier and chamber. Intended for use during storage or transport when weapon is unloaded. Mfg: Blindhogg, Inc SPECS: Molded, reinforced plastic, with neoprene seal, black. 2 1/2” (6.3 cm) high, 3” (7.6cm) long, 1 oz. (28.3g) weight. Fits AR-15/M16.

Click Here to Buy Now

Clark Custom Clark Custom Ar-15 Carbon Fiber Handguard

(4.0)


Buy Clark Custom Clark Custom Ar-15 Carbon Fiber Handguard

We found a great deal on the Clark Custom Clark Custom Ar-15 Carbon Fiber Handguard for only $102.99 at Brownells.

One-piece tube with aluminum barrel nut eliminates barrel pressure points to improve accuracy. Lightweight and strong, carbon fiber tube with fron swivel stud won’t absorb heat, so tube remains cool even after long strings of fire. Attractive and durable with a distinctive weave pattern that changes with the viewing angle. Requires installation of supplied, separate barrel nut and gluing of tube to nut with Elmer’s Ultimate, Devcon High Strength, Gorilla Glue, or equivalent bonding agent. Mfg: Clark Custom SPECS: Carbon fiber, black. 12″ (30.6cm) long. 2″ (5cm) diameter. 6.2 oz (175 g) weight.

Click Here to Buy Now

Links