Archive

Archive for August, 2012

Brownells Ar-15 Trigger Springs

(4.0)


Buy Brownells Ar-15 Trigger Springs

We found a great deal on the Brownells Ar-15 Trigger Springs for only $2.99 at Brownells.

Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replacement springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks. Mfg: Brownells SPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS).

Click Here to Buy Now

Leupold Ar-15/M16 Mark 2 Integral Mounting System

(4.5)


Buy Leupold Ar-15/M16 Mark 2 Integral Mounting System

We found a great deal on the Leupold Ar-15/M16 Mark 2 Integral Mounting System for only $94.99 at Brownells.

Machined aluminum mounts clamp directly to a MIL-STD 1913 Picatinny flattop rail to raise the scope and push it forward, eliminating the need for separate risers or specialized short eye relief optics. Slides into place and secures with steel crossbolts that hold tight. Uses the same clamping system as the Mark 1 and adds built-in scope rings with the correct elevation for proper eye alignment with the scope no need for a separate riser assembly. Cantilever on the front ring lets you position the scope far enough forward for comfortable eye relief. Models available for 1″ or 30mm diameter scope tubes. Mfg: Leupold SPECS: Aluminum, hardcoat anodized, matte black. Steel crossbolts. 5 1/2″ (14cm) OAL.

Click Here to Buy Now

Magpul Ar-15/M16 Moe+ Grip

(4.5)


Buy Magpul Ar-15/M16 Moe+ Grip

We found a great deal on the Magpul Ar-15/M16 Moe+ Grip for only $22.75 at Brownells.

Same shape as the original MOE Grip with the addition of an anti-slip rubber coating Helps you keep control of weapon with wet or sweaty hand Internal storage compartment for small items; accepts Magpul MIAD grip cores (sold separately), too Rubber coating is not applied to bottom edge of grip to reduce risk of snagging on other gear Drop-in replacement for AR-15/M16/M4 A2-type pistol grip; mounting hardware included Also fits AR-style .308 rifles that accept AR-15/M16 grips; on some guns, there may be a gap between the grip’s beavertail and receiver Mfg: Magpul

Click Here to Buy Now

Command Arms Acc Ar-15/M16 One Point Sling Mount

(5.0)


Buy Command Arms Acc Ar-15/M16 One Point Sling Mount

We found a great deal on the Command Arms Acc Ar-15/M16 One Point Sling Mount for only $36.99 at Brownells.

The One Point Sling Mount is available in two models. One mount comes with a Push Button Quick Detach Sling Swivel and the other one will allow the use of sling webbing or snap connectors. It simply slides over the tube and is secured quickly. CNC machined from aluminum wth matte black finish. Mfg: Command Arms Acc SPECS: Aluminum. Weight 0.64 oz.

Click Here to Buy Now

Trijicon Ar-15/M16/Ar-Style .308 Ta33 3×30 Acog Scope

(4.5)


Buy Trijicon Ar-15/M16/Ar-Style .308 Ta33 3x30 Acog Scope

We found a great deal on the Trijicon Ar-15/M16/Ar-Style .308 Ta33 3×30 Acog Scope for only $1037.00 at Brownells.

Lightweight, compact ACOG combines ample 3x magnification with Bindon Aiming Concept (BAC) for quick, instinctive, both-eyes-open aiming-perfect for a patrol rifle or military carbine. Battery-free, dual illumination system uses a fiber optic rod and glowing tritium lamp to illuminate the reticle in bright daylight and low light. Available with two reticle styles. Amber Chevron reticle resembles an upside down “V” and provides the benefits of a triangle reticle while covering less of the target. Also available with Green Horseshoe reticle with a single center dot. Clamps securely to a flattop receiver with the integral base. Available in two models, with a choice of a bulle Mfg: Trijicon SPECS: Forged 7075-T6 aluminum housing, matte black anodized; coated lenses. 61/8″ (15.6cm) long. 11.8 oz. (334g) total weight. 3x magnification, 30mm objective lens. Adjustable for windage and elevation. TA33-8 – Amber chevron BDC reticle calibrated for .223 AR-15/M16. TA33G-H Green inve

Click Here to Buy Now

Brownells 25 30-Round Gray Ar-15/M16 Magazines W/Cs Spring

(4.5)


Buy Brownells 25 30-Round Gray Ar-15/M16 Magazines W/Cs Spring

We found a great deal on the Brownells 25 30-Round Gray Ar-15/M16 Magazines W/Cs Spring for only $249.99 at Brownells.

A battle rifle is only as reliable as its magazine make sure the one in your rifle is from Brownells. When the difference between a “bang” and a “click” is life and death, a magazine failure is more than inconvenient it can be fatal. So when we decided to build our own AR-15/M16 magazines, reliability was our first priority. Some of us have sons and daughters serving overseas or in law enforcement, and we aimed to build the kind of magazine we’d trust their lives with. We started with a clean slate, then worked out the bugs on the drawing board and the test range before we offered a single mag for sale, so you get a magazine of uncompromising qua Mfg: Brownells SPECS: Aluminum body, MIL-STD hard-anodized, dry-lube coating. Chrome silicon spring. MIL-STD plastic follower.

Click Here to Buy Now

Tactical Supply Depot Ar-15/M16 Engraved Charging Handles

(4.0)


Buy Tactical Supply Depot Ar-15/M16 Engraved Charging Handles

We found a great deal on the Tactical Supply Depot Ar-15/M16 Engraved Charging Handles for only $34.99 at Brownells.

Features: Standard AR-15/M16 Charging Handle with Custom Engraving Available as a “Zombie Hunter” or “Punisher” model Engraved on the rear of the handle and on the top of the interior Matte black finishBenefits: Engraving adds a custom look to your AR-15 or M16, with a simple drop-in part Rear engraving is visible when the charging handle is in the forward position When charged, the interior engraving is also visible Standard, mil-spec dimensions fit any traditional AR-15 or M16 Mfg: Tactical Supply Depot SPECS: Matte black. Aluminum. 1.6 ounces

Click Here to Buy Now

Dpms Firearms Llc Ar-15/M16 Competition Upper Receiver

(4.5)


Buy Dpms Firearms Llc Ar-15/M16 Competition Upper Receiver

We found a great deal on the Dpms Firearms Llc Ar-15/M16 Competition Upper Receiver for only $79.99 at Brownells.

Fully machined from aircraft grade aluminum alloy, with extra material around the bolt carrier to provide a strong, rigid, platform for mounting heavy match barrels. Integral Picatinny-style scope rail gives complete flexibility for mounting all types of sight systems. Accepts Weaver-style rings. Eliminates the forward assist and ejection port cover for easier operation and smoother profile. High Rider – 1″ high rail height is correct for scope mounting with low rings. No need for a cheek pad; permits large objective scopes to clear the hand guards. Lo-Pro – Standard height rail allows use of detachable carry handles. Convenient mounting for electronic dot sights. Mfg: Dpms Firearms Llc SPECS: Aircraft aluminum alloy, black, hardcoat anodized. Teflon coated. .250″ (6.3mm) pivot pin dia. .254″ (6.47mm) thick side walls.

Click Here to Buy Now

A.R.M.S.,Inc Ar-15/M16 Rear Folding Polymer Sight

(4.5)


Buy A.R.M.S.,Inc Ar-15/M16 Rear Folding Polymer Sight

We found a great deal on the A.R.M.S.,Inc Ar-15/M16 Rear Folding Polymer Sight for only $49.99 at Brownells.

Made from durable, metal-reinforced polymer and are a good option when seeking a quality sight Measures .610″ when folded Designed for 1913 mil-std rails Features the same metal dual apertures utilized in the A.R.M.S. #40l under contract with crane naval special warfare center, for both CQB and long range shooting applications Mfg: A.R.M.S.,Inc

Click Here to Buy Now

Midwest Industries, Inc. Ar-15 Sling Adapter

(4.0)


Buy Midwest Industries, Inc. Ar-15 Sling Adapter

We found a great deal on the Midwest Industries, Inc. Ar-15 Sling Adapter for only $39.99 at Brownells.

Hard anodized, 6061 aluminum sling adapter clamps to collapsible stock buffer tubes with no need for special tools or to remove the buffer tube. Two models available: Loop for claw-type clasp; or Slot for conventional web slings. Adapters can be used with single-point, two-point, or three-point tactical slings and are ambidextrous for use with right- or left-hand operation. Does not interfere with normal operation of collapsible stock. Mfg: Midwest Industries, Inc. SPECS: 6061 aluminum, hard anodized, matte black. Fits 4-6 position collapsible stocks. No gunsmithing required.

Click Here to Buy Now

Links