Archive

Archive for March, 2012

Brownells Ar-15 Replacement Bore Mops

(4.5)


Buy Brownells Ar-15 Replacement Bore Mops

The Brownells Ar-15 Replacement Bore Mops can be found at Brownells for $11.99, which is a pretty good price.

Make short work of cleaning heavily fouled AR-15 upper receivers, right down to the locking lug recess. Wool mop quickly loosen stubborn carbon residue from the bolt carrier way and locking lug recess. Mfg: Brownells

Click Here to Buy Now

Brownells Ar-15/M16 22lr Conversion & 525 Rounds Of 22lr Ammo Pack

(4.0)


Buy Brownells Ar-15/M16 22lr Conversion & 525 Rounds Of 22lr Ammo Pack

Brownells has a great price on the Brownells Ar-15/M16 22lr Conversion & 525 Rounds Of 22lr Ammo Pack, at only $215.99.

Get started shooting 22LR out of your AR15 with this package Includes 22LR conversion and 3 22LR magazines 525 rounds of 22LR allows you to start shooting as soon as you install the conversion Mfg: Brownells

Click Here to Buy Now

Midwest Industries, Inc. Sig 556 Folding Front Sight

(4.5)


Buy Midwest Industries, Inc. Sig 556 Folding Front Sight

The Midwest Industries, Inc. Sig 556 Folding Front Sight can be found at Brownells for $89.99, which is a pretty good price.

Flip-up front sight deploys with the flick of a finger to provide instant back-up to keep you in the fight if your Sig 556’s primary optics or laser sight fails. Fits the factory dovetail on the gas block, and is the correct height to allow use of any Midwest Industries AR-15 flip-up rear sight. Uses standard A2 front sight post to ensure correct sight picture and easy adjustment using an A2 front sight tool. Super-smooth pivot mechanism with sturdy ball-bearing detent locks positively in the raised position and stays locked until you hit the pushbutton release. Folds down neatly out of your sight path when not in use. Mfg: Midwest Industries, Inc. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black.

Click Here to Buy Now

Yankee Hill Machine Co., Inc. Ar-15/M16 “smooth” Free Float Handguard

(4.5)


Buy Yankee Hill Machine Co., Inc. Ar-15/M16

We found a great deal on the Yankee Hill Machine Co., Inc. Ar-15/M16 “smooth” Free Float Handguard for only $139.99 at Brownells.

Lightweight, machined aluminum forearm combines the accessory mounting versatility of a quad-railed forearm with a “smooth,” un-railed area for support hand comfort to aid in enhanced weapon control. Integral, full-length Picatinny top rail, plus forward 2.5″ rails on the sides and bottom, offer plenty of attachment space for lights, lasers, optics, backup sights, and other accessories. Modular design accepts a variety of bolt-on YHM accessories, available below. Smooth areas are drilled and tapped to accept Add-On Rails for additional accessory mounting options. Side and bottom rails have receptacles for Threaded Swivel Studs; also accepts YHM Forearm End Cap. YHM’s f Mfg: Yankee Hill Machine Co., Inc. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Carbine 9 1/4″ (23.5cm) OAL, 2 1/2″ (6.4cm) diameter. 12.4 oz. (352g) weight. Fits AR-15/M16 with carbine-length gas system. Rifle 12 1/2″ (31.8cm) OAL, 2 1/2″ diameter. 16.6 oz. (471g)

Click Here to Buy Now

Mission First Tactical, Llc Ar-15 M33 Handguard

(4.0)


Buy Mission First Tactical, Llc Ar-15 M33 Handguard

The Mission First Tactical, Llc Ar-15 M33 Handguard can be found at Brownells for $39.99, which is a pretty good price.

Easily mount lasers, lights, optics, bi-pods, and other mission-specific accessories. Picatinny rails are injection molded directly into each handguard top and bottom half to provide a snag-free profile. Furnished with a slide-on cover that gives a comfortable grip, plus protects the rails when not in use. A stainless steel heat shield acts as a heat sink to dissipate the high temperatures created during sustained, rapid fire sequences. Mfg: Mission First Tactical, Llc SPECS: High density polymer, black. 6-7/8″ (17.5cm) long. Fits all M-16/AR15 style carbines.

Click Here to Buy Now

Midwest Industries, Inc. Ar-15/M16/Ar-Style .308 Flip-Up Rear Sight

(4.5)


Buy Midwest Industries, Inc. Ar-15/M16/Ar-Style .308 Flip-Up Rear Sight

The Midwest Industries, Inc. Ar-15/M16/Ar-Style .308 Flip-Up Rear Sight can be found at Brownells for $116.99, which is a pretty good price.

Flip-up sights deploy with the flick of a finger to provide instant back-up, so you stay in the fight if your optic or laser sight fails. Super-smooth pivot mechanism with sturdy ball-bearing detent locks positively in the raised position and stays locked until you hit the pushbutton release. Sight folds down neatly out of your sight path when not in use. Machined from high-quality 6061 T6 aluminum and hardcoat anodized for increased wear-resistance. Hex wrench included with all models for easy installation. Rear Sights clamp securely to flattop receivers. Flip-style A2 aperture features a small peep opening for long-range daylight shots and a large opening for close-range and low-light work Mfg: Midwest Industries, Inc. SPECS: Aluminum, hardcoat anodized, Black, Dark Earth, or O.D. Green. Fits flattop AR-15/M16 rifles. MCTAR-ERS – 13/8″ (3.5cm) long, 13/8″ wide, 1 3/4″ (4.4cm) high deployed, 1″ (2.5cm) high folded. 2.2 oz. (61g) weight. MCTAR-SPLP 2 1/4″ (5.7cm)

Click Here to Buy Now

Kns Precision, Inc. Ar-15/M16 Push-Button Receiver Pins

(4.5)


Buy Kns Precision, Inc. Ar-15/M16 Push-Button Receiver Pins

The Kns Precision, Inc. Ar-15/M16 Push-Button Receiver Pins is only $16.99 at Brownells these days, which seems to be a pretty good price.

Steel, push-button pins give a positive lock that quickly release with finger pressure for easy access to the inside of your AR-15’s upper and lower receivers. Three, spring-loaded detent balls hold pins in place and prevent wear or binding in the pivot hole or receiver hole when removed. Pivot Pin replaces the factory front pivot pin and is available for receivers drilled for .315″ or .250″ pivot pins. Swivel Stud Pivot Pin has a convenient sling swivel stud on one side for easy sling mounting close to your weapon’s point of balance on the left side of the receiver. Detent balls lock into the base of the stud, yet leave it free to rotate a full 360deg. Takedown Pin replaces the rear, factor Mfg: Kns Precision, Inc. SPECS: Steel, black oxide finish. Pivot Pin – Available for receivers with .250″ or .315″ diameter pivot pin. Swivel Stud Pivot Pin fits receiver with .250″ diameter pivot pin. Takedown Pin – Fits receivers with .250″ diameter takedown pin.

Click Here to Buy Now

Smith Enterprise M14/M1a Direct Connect Vortex

(4.5)


Buy Smith Enterprise M14/M1a Direct Connect Vortex

The Smith Enterprise M14/M1a Direct Connect Vortex can be found at Brownells for $100.99, which is a pretty good price.

Four, specially angled flutes hide nearly 100% muzzle flash, even during full-auto fire, by dissipating gas and retaining unburned powder for increased residual burn. Constructed of the same 8620 bar stock steel used in the manufacture of AR-15/M16 bolts and carriers, then heat-treated to provide a high-strength core and tough, outer shell. Special, helix design helps align exiting barrel gas to improve accuracy with all bullet types.Threaded, deep skirt design provides a clean-looking, direct connection to M14/M1A barrels. Self-tightening, helix design eliminates need for a lock washer. Requires removal of OEM front sight and replacement with Smith Enterprise M14/M1A Gas Cylinder Lock Sig Mfg: Smith Enterprise SPECS: 8620 steel. Parkerized, black, matte finish. .595″-32 tpi. 3-3/16″ (8.1cm) long. .858″ (22mm) dia. 4.1 oz (116 g) wt. Fits M14 and M1A rifles.

Click Here to Buy Now

Brownells Action Springs

(4.5)


Buy Brownells Action Springs

The Brownells Action Springs is only $4.99 at Brownells these days, which seems to be a pretty good price.

Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replacement springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks. Mfg: Brownells SPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS).

Click Here to Buy Now

High Standard Bolt/Carrier Assembly

(4.5)


Buy High Standard Bolt/Carrier Assembly

The High Standard Bolt/Carrier Assembly is only $179.99 at Brownells these days, which seems to be a pretty good price.

High-quality, mil-spec parts from a respected name in precision firearms for more than 75 years, now a premier maker of complete AR-15 rifles. Replace worn or damaged parts to return a service rifle to factory specs or use in building a precision custom rifle that meets your exact requirements. Complete, prepackaged kit includes all the parts you need for specific subassemblies. Saves time and money-no need to hunt down each item individually. Bolt/Carrier Assembly includes carrier, carrier key, bolt, extractor, extractor spring, extractor pin, ejector, ejector spring, ejector pin, firing pin, firing pin retainer, cam pin, (3) gas rings, and screws. Mfg: High Standard SPECS: Steel, parkerized, dark gray finish; aluminum, hardcoat anodized, matte black finish; or spring steel.

Click Here to Buy Now

Links