Archive

Archive for December, 2011

John Masen Ar-15 Raised Cheekpiece

(4.0)


Buy John Masen Ar-15 Raised Cheekpiece

The John Masen Ar-15 Raised Cheekpiece can be found at Brownells for $24.95, which is a pretty good price.

AR-15 Cheekpiece provides correct head position and eye alignment for scope sighted rifles. Clamps over A-1 and A-2 buttstocks, installs in minutes with no modifications to stock. Textured, matte-black surface blends well with stock. Soft rubber top section gives added comfort. Shorty Cheekpiece provides correct scope-to-eye alignment to AR-15 rifles with collapsible buttstock. Soft rubber cheekpad improves shooting comfort, gives 1 1/4″ additional height. Quick, snap-on installation. Mfg: John Masen SPECS: AR-15 Cheekpiece – Plastic, black. 6″ (15.2cm) long. Raises height of comb 1 1/4″ (3.2cm). Shorty Cheekpiece – Plastic, black. 5-3/4″ (14.6cm) long.

Click Here to Buy Now

Brownells 25 30-Round Gray Ar-15/M16 Magazines W/Cs Spring

(4.5)


Buy Brownells 25 30-Round Gray Ar-15/M16 Magazines W/Cs Spring

The Brownells 25 30-Round Gray Ar-15/M16 Magazines W/Cs Spring can be found at Brownells for $249.99, which is a pretty good price.

A battle rifle is only as reliable as its magazine make sure the one in your rifle is from Brownells. When the difference between a “bang” and a “click” is life and death, a magazine failure is more than inconvenient it can be fatal. So when we decided to build our own AR-15/M16 magazines, reliability was our first priority. Some of us have sons and daughters serving overseas or in law enforcement, and we aimed to build the kind of magazine we’d trust their lives with. We started with a clean slate, then worked out the bugs on the drawing board and the test range before we offered a single mag for sale, so you get a magazine of uncompromising qua Mfg: Brownells SPECS: Aluminum body, MIL-STD hard-anodized, dry-lube coating. Chrome silicon spring. MIL-STD plastic follower.

Click Here to Buy Now

Eotech Holographic Sight & Magnifier Combo

(4.5)


Buy Eotech Holographic Sight & Magnifier Combo

The Eotech Holographic Sight & Magnifier Combo is only $935 at Brownells these days, which seems to be a pretty good price.

Money-saving kit combines EOTech’s combat-proven Model 557 holographic weapon sight, 3x Magnifier, and quick-release Flip-To-Side (FTS) mount to produce a highly versatile short- and long-range sighting system for your flattop AR-15. Model 557 sight employs a ballistic matched reticle calibrated for the M4 carbine, with four vertically aligned 1 MOA aiming dots for target distances of 0-300m, 400m, 500m, and 600m. Flush-mounted control buttons on left side ensure easy, fast access with Magnifier installed. Front one-third of the base underside is elevated .275″ (7mm) for clearance over delta ring and standard military-style plastic handguard; lets you mount the 557 far enough forw Mfg: Eotech SPECS: 557 Aluminum & polycarbonate, matte, black. 5 3/4″ (14.6cm) long, 2-1/8″ wide, 2 3/4″ high. 12.3 oz. (349g) weight. Lens – 3/16″ thick, 3-layer, shatterproof laminate glass. Reticle – four vertically aligned 1 MOA dots. Requires two (2) 1.

Click Here to Buy Now

Magpul Ar-15/M16 Emag

(4.5)


Buy Magpul Ar-15/M16 Emag

Brownells has a great price on the Magpul Ar-15/M16 Emag, at only $22.99.

Lightweight molded polymer magazine combines features of Magpul’s popular PMAG with exterior dimensions engineered to meet NATO STANAG 4179 compatibility requirements. The EMAG (Export MAGazine) is fully compatible with all AR-15/M16 variants, HK 416, FN SCAR, SA-80, Beretta ARX-160, IMI Tavor, and other .223/5.56mm weapons that use AR-type mags. The crush-resistant, one-piece body of fiberglass-reinforced molded polymer has a slim, unribbed exterior that ensures it’ll fit in magazine pouches and couplers designed for USGI M16 magazines. The EMAG has the same sealed, constant-curve body and self-lubricating anti-tilt follower as the PMAG, and even accepts the PMAG Ranger Floorpla Mfg: Magpul SPECS: Molded polymer body and follower, stainless steel spring. Available in black only. 30-round capacity.

Click Here to Buy Now

Falcon Industries Ar-15 Vertical Forend Grip

(5.0)


Buy Falcon Industries Ar-15 Vertical Forend Grip

We found a great deal on the Falcon Industries Ar-15 Vertical Forend Grip for only $75.99 at Brownells.

Gives AR-15 rifles a forward hand hold that improves weapon retention and recoil control. Attaches quickly to a Weaver-style or Picatinny, handguard accessory rail. Single-screw attaching clamp provides fast on/off for storage or deployment. ERGO – Easy-to-grasp, pebble grain texture provides comfortable, hand filling control. Broomhandle – Rubber-covered grip has a ribbed, non-slip surface. Waterproof storage compartment lets you carry spare batteries for sights and night vision devices. Select from Straight or Angled 11deg to the rear. Attaches to Weaver-style accessory rail. Handguard model mounts directly to rifle or carbine handguard vent holes. Mfg: Falcon Industries SPECS: Steel mount; high impact polyurethane grip. Black. 4 1/2″ (11.4cm) long. Broomhandle is 1 1/2″ (3.8cm) in diameter.

Click Here to Buy Now

Tti Intl Ar-15/M16 Bolt Gas Rings, 5 Sets Of 3

(4.5)


Buy Tti Intl Ar-15/M16 Bolt Gas Rings, 5 Sets Of 3

Brownells has a great price on the Tti Intl Ar-15/M16 Bolt Gas Rings, 5 Sets Of 3, at only $7.99.

Genuine, Mil-spec quality small parts for the AR-15/M-16 that wear out, break, or just get lost. Great for creating your own emergency parts kits. Mfg: Tti Intl SPECS: Parts sold 5 per pack.

Click Here to Buy Now

Jard Ar-15 Non-Adjustable Trigger Kit

(4.5)


Buy Jard Ar-15 Non-Adjustable Trigger Kit

Brownells has a pretty good price on the Jard Ar-15 Non-Adjustable Trigger Kit, for only $148.99.

Easy to install, non-adjustable, AR-15 trigger replaces the heavy, gritty-feeling, factory hammer and trigger for a smooth, clean-breaking pull that’s sure to improve accuracy. Unique, single-stage design positions the sear engagement point behind the hammer for added leverage and a dependable, 3-pound pull weight. High-performance, low mass hammer reduces lock time. Precision-cut engagement surfaces are heat-treated for low wear. Requires gunsmith fitting in receivers with a sear block. Mfg: Jard SPECS: Steel, black matte finish. Includes hammer, hammer spring, trigger and trigger spring. Non-adjustable, 3 lb. (1.4 kg) pull weight. Available for rifles with .154″ or .171″ hammer and trigger pins.

Click Here to Buy Now

Bob Hahin Ar-15/M16 Original Bob Sled

(4.0)


Buy Bob Hahin Ar-15/M16 Original Bob Sled

The Bob Hahin Ar-15/M16 Original Bob Sled is only $41.67 at Brownells these days, which seems to be a pretty good price.

Self-lubricating, Delrin(R) loading block replaces the magazine and follower for smooth, single round loading. Bolt holds open after every shot. CNC-machined loading tray ensures proper cartridge alignment and reliable feeding. OBS10 provides a short, match-length loading block. OBS20 is the same size and shape as a 20-round AR-15 magazine; approved for Service Rifle competitions. Mfg: Bob Hahin SPECS: Delrin. OBS10 – Approx. 2 1/2″ (6.4cm) long, 7/8″ (2.2cm) wide, 3″ (7.6cm) high. OBS20 – Approx. 2 1/2″ long, 7/8″ wide, 5″ (12.7cm) high. Fits AR-15/M16, .223 cal.

Click Here to Buy Now

Maglula Ltd. Ar-15/M16 Striplula

(4.5)


Buy Maglula Ltd. Ar-15/M16 Striplula

The Maglula Ltd. Ar-15/M16 Striplula is only $34.99 at Brownells these days, which seems to be a pretty good price.

Thumb-saving, lightweight magazine loader provides fast, painless 30-round magazine loading in less than 13 seconds. Accepts 10-round stripper clips or loose rounds for easy loading of 10-, 20-, and 30-round magazines, and is capable of unloading a 30-round magazine in 15 seconds. Ambidextrous, grooved thumb slide provides a non-slip grip for right- or left-hand loading. Constructed of durable, reinforced polymer for dependable operation under extreme field conditions. Fits all AR-15/M16 metal and plastic magazines. Mfg: Maglula Ltd. SPECS: Polymer, black. 5-15/16″ (13.5cm) long, 1-1/8″ (2.8cm) wide, 1-3/16″ (3cm) high. 1.2 oz. (34g) weight. Accepts 10-round stripper clips or loose rounds. Fits all AR-15/M16 magazines.

Click Here to Buy Now

Specter Gear Ar-15/M16 Two-Point Tactical Sling

(5.0)


Buy Specter Gear Ar-15/M16 Two-Point Tactical Sling

The Specter Gear Ar-15/M16 Two-Point Tactical Sling can be found at Brownells for $34.99, which is a pretty good price.

Wrap-around nylon-webbing sling secures to the side of an AR-15/M16 with a fixed rifle buttstock for enhanced freedom of movement without tangles or twisting. Allows the weapon to hang in a vertical orientation when carried in the “Military Patrol Ready” position. Features a quick-release buckle for emergency disengagement that lets you instantly move into an unconventional shooting position without removing the body loop. Spring loaded, self-locking rapid-adjust buckle has an easy-to-grasp paracord pull for fast, one-handed sling length changes. Hook-and-loop straps provide a tight hold around buttstock and forend, using the USGI front sling swivel on the gas block for added security. Compo Mfg: Specter Gear SPECS: Nylon webbing, polycarbonate clasp. Steel adjustment buckle. 3/4″ (1.9cm) wide forearm strap, 1 1/2″ (3.8cm) wide shoulder strap. Adjusts from 40″ (102cm) to 63″ (160cm) OAL. Fits all AR-15/M16 variants with a fixed rifle buttstock, round or triangular handguard

Click Here to Buy Now

Links