Archive

Archive for July, 2011

Double Star Carbine Barrels

(4.5)


Buy Double Star Carbine Barrels

The Double Star Carbine Barrels is only $189.99 at Brownells these days, which seems to be a pretty good price.

Ready-to-install barrels let you customize your AR-15/M16/M4/CAR-15 or replace a “shot-out” factory barrel with one that preserves your gun’s original specs and appearance. Machined from 4140 steel, with a dark gray, military-type Parkerized finish. Button-cut, six groove rifling with 1:9 right-hand twist provides superb accuracy with most bullet weights. Barrel extension has M4-type feed ramps to help ensure smooth feeding and prevent jams. Barrel nut and handguard retainer cap included. Forged front sight housing has integral bayonet lug, and muzzle is threaded to accept the flash hider or compensator of your choice. Choose from Chrome Lined for maximum bore life or Stand Mfg: Double Star SPECS: 4140 steel, dark gray Parkerized finish. A1 – .675″ (1.71cm) OD under handguard, .625″ (1.59cm) at front sight housing, 1/2″-28 tpi threaded muzzle with .600″ (1.52cm) dia. shoulder behind threads. HBAR – .870″ ( 2.21cm) OD under handguard, .750″ (1.91cm) at

Click Here to Buy Now

Hahn Precision Ar-15 9mm Conversion Block

(4.5)


Buy Hahn Precision Ar-15 9mm Conversion Block

The Hahn Precision Ar-15 9mm Conversion Block can be found at Brownells for $200, which is a pretty good price.

One-piece, machined aluminum block converts AR-15 lower receiver to 9mm. Compatible with all, Colt-type, 9mm upper receivers, the feed ramp is cut for reliable feeding with all types of ammo, including hollow point and frangible ball. Roller retention device holds block securely in receiver, prevents accidental release. Hardened steel ejector, feed ramp and bolt hold open give long service life; last-round-hold-open feature on bottom-loading model works when used with Colt magazines. Also works with modified UZI magazines but last-round-hold-open will not function. No receiver modification required. Top-Loading Block installs from the top of the lower receiver and Botto Mfg: Hahn Precision SPECS: Aluminum, black, matte finish.

Click Here to Buy Now

Jo Ar-15/M16 Muzzle Break

(4.0)


Buy Jo Ar-15/M16 Muzzle Break

Brownells has a pretty good price on the Jo Ar-15/M16 Muzzle Break, for only $59.99.

Low-profile muzzle brake has an internal expansion chamber and five longitudinal vents that direct combustion gases upward to counteract muzzle rise. Tames muzzle climb during full- and semi-auto fire to help you keep the sights on the target for fast, accurate follow-up shots. Classic A2 profile replicates the external appearance of the USGI A2 flash hider, so your AR keeps an “as-issued” look and will continue to accept blank-firing adapters, sound suppressors, and other muzzle devices that fit the original A2 hider. Precision machined from A2 chromium-molybdenum alloy tool steel, heat-treated for additional hardness to resist erosion from hot gases, with a durable, black oxide Mfg: Jo SPECS: A2 tool steel, black oxide finish. 1.925″ (4.9cm) long, .905″ (2.3cm) O.D. 2.4 oz. (68g) weight. 1/2″-28 tpi RH thread. Fits AR-15/M16-type rifles and carbines chambered in .223/5.56mm.

Click Here to Buy Now

Agi Disassembly/Reassembly Video Courses

(4.0)


Buy Agi Disassembly/Reassembly Video Courses

Brownells has a great price on the Agi Disassembly/Reassembly Video Courses, at only $33.99.

1 DVD per course. Approx. 90 minutes each. Videos geared toward the average gun enthusiast teach you how to disassemble and reassemble popular guns with complete confidence. Master gunsmith Ken Brooks gives clear, step-by-step instructions on taking each gun all the way down to the small parts. Detailed explanations of actions and major components help you keep your gun in safe, reliable, top-notch condition. Each DVD is fully indexed, so you can quickly access the information you’re looking for. Professional video production with sharply focused close ups and excellent sound quality. 1911 and AR-15 courses are applicable to most models, calibers, and manufacturers. Mfg: Agi

Click Here to Buy Now

A.R.M.S.,Inc Throw Lever Optic Mounts

(4.5)


Buy A.R.M.S.,Inc Throw Lever Optic Mounts

We found a great deal on the A.R.M.S.,Inc Throw Lever Optic Mounts for only $114 at Brownells.

Compact, quick-detach mounts clamp directly to AR-15/M16/M4 flattop receiver rail for solid, ultra-secure attachment of optics and holographic sights. The strong, yet lightweight aluminum base is secured to the rail by steel throw levers and locking feet, while a recoil lug locks into one rail slot to prevent unwanted sight movement under recoil. Quick-release levers close securely against the side of the mount to prevent snagging on other objects, yet release easily when you want to remove the sight and mount as one unit without loss of zero. Adapter-mount lets you easily install a Trijicon(R) ACOG scope designed for carry-handle rifles on a flattop. Available in Dual Lever and Single Lever Mfg: A.R.M.S.,Inc SPECS: Aluminum rail, hardcoat anodized, matte black; steel levers, oxide finish, matte black. Dual Lever – 5-3/8″ (13.7 cm) long. 3.4 oz. (95 g) wt. Single Lever – 3-11/16″ (9.4cm). 2.5 oz. (72 g) wt.

Click Here to Buy Now

Buffer Technologies Rifle Recoil Buffers

(4.5)


Buy Buffer Technologies Rifle Recoil Buffers

The Buffer Technologies Rifle Recoil Buffers is only $9.95 at Brownells these days, which seems to be a pretty good price.

Shock-absorbing, polyurethane buffer helps extend the service life of your rifle; gives better muzzle stability, reduces action noise. Provides a gentle cushion that gradually slows the bolt and helps prevent expensive receiver damage. Installs easily; no permanent modifications required. AR-15 replaces the synthetic pad on factory buffer assembly. Requires drilling the recoil buffer for cross pin. Mfg: Buffer Technologies SPECS: Polyurethane, clear.

Click Here to Buy Now

M G I Ar-15/M16 D-Fender D-Ring

(4.5)


Buy M G I Ar-15/M16 D-Fender D-Ring

Brownells has a great price on the M G I Ar-15/M16 D-Fender D-Ring, at only $15.99.

Firm, rubber, D-shaped ring surrounds the extractor spring to multiply extractor spring tension by 400%. Easy installation prevents virtually all extraction problems associated with AR-15 and M16 firearms. Mfg: M G I SPECS: Rubber, black. .068″ (1.7mm) thick.

Click Here to Buy Now

California Comp. Works Semi-Auto Rifle Magazine Storage Pouch

(4.0)


Buy California Comp. Works Semi-Auto Rifle Magazine Storage Pouch

The California Comp. Works Semi-Auto Rifle Magazine Storage Pouch is only $34.99 at Brownells these days, which seems to be a pretty good price.

Convenient for carry and storage, keeps your magazines clean, damage free and ready to use. Carry in your range bag, attach to your back pack or use D-rings for shoulder strap. Quality-made, Cordura nylon pouch with double-stiched seams, full-width cover and velcro closures. .223 model holds eight AR-15 or twelve .30 Carbine, 30 round magazines. .308 model holds, eight 20 round, .308 magazines or twelve 30 round, .30 Carbine magazines. Mfg: California Comp. Works SPECS: Nylon, double-sewn seams. Closed size: Width – 8- 1/2″ (21.6cm). 13″ (33cm), Long.

Click Here to Buy Now

Command Arms Acc Rifle Magazine Loader

(4.5)


Buy Command Arms Acc Rifle Magazine Loader

We found a great deal on the Command Arms Acc Rifle Magazine Loader for only $12.99 at Brownells.

Easy-to-use loader snaps over top of detachable box magazine to help you quickly and efficiently insert rounds without pinching, bruising, or cutting fingers and thumbs. Lets you load up mags fast, so you spend more precious range time shooting. Wide thumb pad provides plenty of leverage to compress the magazine spring, even when close to full capacity. Quick-release tab locks into mag catch notch to prevent unwanted movement during loading. Fits any .223/5.56mm or 6.8mm magazine for AR-15/M16 and Ruger(R) Mini-14(R), as well as STANAG-compatible mags. Rugged, molded polymer construction with a textured, no-slip surface. Mfg: Command Arms Acc SPECS: Molded polymer, black. Fits any capacity AR-15/M16, STANAG-compatible, and Ruger(R) Mini-14(R) magazines in .223/5.56mm or 6.8mm.

Click Here to Buy Now

Brownells Ar-15 Ejector Springs

(4.5)


Buy Brownells Ar-15 Ejector Springs

Brownells has a great price on the Brownells Ar-15 Ejector Springs, at only $1.07.

Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replacement springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks. Mfg: Brownells SPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS).

Click Here to Buy Now

Links