Archive

Archive for February, 2011

Aimtech Ar-15/M16 “second Sight” See-Thru Base

(4.5)


Buy Aimtech Ar-15/M16

The Aimtech Ar-15/M16 “second Sight” See-Thru Base can be found at Brownells for $23.5, which is a pretty good price.

Lightweight, see-thru bases attach quickly to factory drilled and tapped receivers with no modifications to the factory sights required. Hollow base gives you full vision of factory, barrel-mounted sights for closer shots, or if your scope becomes damaged. Clearance cut ensures proper ejection. Accepts Weaver-style rings. AR-15 Short has Weaver-style rail. AR-15 Long is Picatinny configuration. Mfg: Aimtech SPECS: Aluminum, anodized, black, matte finish. Approx. 6″ (16cm) long, 1 oz. (28 g) wt. AR-15 bases fit carry handle receivers. AR15 Short: 4″ (10cm) long. AR-15 Long: 7-1/2″ (19cm) long. Includes screws, instructions.

Click Here to Buy Now

Black Dog Machine Llc Ar-15/M16 Upper Receiver Bolt Saver

(4.5)


Buy Black Dog Machine Llc Ar-15/M16 Upper Receiver Bolt Saver

We found a great deal on the Black Dog Machine Llc Ar-15/M16 Upper Receiver Bolt Saver for only $2.99 at Brownells.

Molded polymer cover fits in the underside of a disassembled .22 LR conversion upper receiver to prevent the bolt from falling out. Keeps dirt and debris out of internal components, too. Slide over the takedown and pivot pins, then secure in place with the two included cotter pins. Can be installed on any disassembled centerfire upper as well to protect the bolt carrier. Mfg: Black Dog Machine Llc SPECS: Polymer, black. Fits AR-15/M16/M4 upper receiver and .22 LR conversions.

Click Here to Buy Now

Scherer Ak-47/Ar-15 Thread Adapter

(5.0)


Buy Scherer Ak-47/Ar-15 Thread Adapter

The Scherer Ak-47/Ar-15 Thread Adapter can be found at Brownells for $4.99, which is a pretty good price.

Steel adapter allows you to install muzzle brakes and flash hiders on tactical rifles with an unthreaded barrel. No machining necessary; four setscrews secure adapter to barrel in seconds. C-1 Adapter features 14mm-1.0 lefthand threads for 7.62×39 caliber AK-47 and SKS rifles. C-5 Adapter has 1/2-28 threads for installation on Colt sporter and similarly contoured, AR-15 barrels. Mfg: Scherer SPECS: Steel, blued finish. C-1 – 1-3/16″ (3cm) long, .552″ (14mm) I.D., .830″ (21mm) O.D. Fits AK-47 and SKS. C-5 – 1-3/16″ long, .708″ (18mm) I.D., .978″ (25mm) O.D. Fits Colt AR-15.

Click Here to Buy Now

Brownells Ar-15/M16 Oversize Magazine Release

(4.0)


Buy Brownells Ar-15/M16 Oversize Magazine Release

Brownells has a great price on the Brownells Ar-15/M16 Oversize Magazine Release, at only $19.99.

Extended, drop-in replacement for factory part offers a wide, flat finger pad for fast, “can’t miss” magazine changes. Perfect for competition, tactical operations, and self-defense-any high-stress situation where the speed of a magazine change makes the difference between success and failure. Nearly three times the surface area of the factory button with crisp, 24 lpi checkering for positive, nonslip finger contact, so you release the mag on the very first try. Stands .225″ higher to give you extra leverage that ensures the mag catch disengages completely. Precision machined from 4140 steel and heat treated for added hardness and wear resistance, with a tough, black oxide finish. May requir Mfg: Brownells SPECS: Steel, oxide finish, matte black. Fits any AR-15/M16/CAR-15/M4 with a USGI-spec magazine release.

Click Here to Buy Now

Bushmaster Firearms Int.Llc. Ar-15/M16 V-Match Upper Receiver

(4.0)


Buy Bushmaster Firearms Int.Llc. Ar-15/M16 V-Match Upper Receiver

The Bushmaster Firearms Int.Llc. Ar-15/M16 V-Match Upper Receiver is only $181.99 at Brownells these days, which seems to be a pretty good price.

Stripped, A3-style flattop upper receiver is carefully machined to mil-spec or better dimensions to serve as the foundation for a top-quality AR rifle customized to your exact requirements. Just add the bolt/carrier, charging handle, ejection port cover, and forward assist of your choice to complete the upper. Precision machined from a forging of 7075 T6 aluminum that is almost 40% stronger than the alloy used in standard AR-15 receivers, so it stands up to the unrelenting tempo of competition or tactical operations. After machining, a dark gray, non-reflective, hard-anodized finish is applied for strength and corrosion resistance, with a baked-on dry-lube coating inside to reduce wear and Mfg: Bushmaster Firearms Int.Llc. SPECS: 7075 T6 aluminum, hardcoat anodized, dry-lube finish, matte dark gray. .250″ (6.3mm) diameter pivot pin holes.

Click Here to Buy Now

Patriot Ordnance Factory Ar-15/Ar-Style .308 Machined Lower Receiver

(4.5)


Buy Patriot Ordnance Factory Ar-15/Ar-Style .308 Machined Lower Receiver

The Patriot Ordnance Factory Ar-15/Ar-Style .308 Machined Lower Receiver can be found at Brownells for $449.99, which is a pretty good price.

Stripped, semi-auto lower receiver is fully machined from U.S.-sourced 7075 T6 aluminum billet for superb strength and precise dimensions. Extra metal in the right places gives a big payoff in added support and rigidity with minimal extra weight. Available in AR-15 and AR-style .308 sizes, both models accept mil-spec and aftermarket components, so you can select the upper, trigger group, pistol grip, receiver extension, and buttstock that best serve your needs-the perfect foundation for a custom tactical rifle. Integral, oversized triggerguard machined as part of the receiver further enhances structural rigidity and provides plenty of clearance for trigger finger when wearing gloves. R Mfg: Patriot Ordnance Factory SPECS: 7075 T6 aluminum, hardcoat anodized. Small-pin, .154″ (3.9mm) hammer/trigger pin holes. P-415 – Available with matte black Teflon finish or matte medium gray NP3 finish. Accepts mil-spec AR-15/M16 rifle or carbine upper receiver and internal components. .250″ (6.3mm)

Click Here to Buy Now

Tactical Supply Depot Ar-15/M16 Engraved Trigger Guards

(4.5)


Buy Tactical Supply Depot Ar-15/M16 Engraved Trigger Guards

We found a great deal on the Tactical Supply Depot Ar-15/M16 Engraved Trigger Guards for only $21.99 at Brownells.

Custom engraved AR15/M16 trigger guards Enlarged designed allows for easier use with gloves Mounting hardware & wrench included for install Mfg: Tactical Supply Depot

Click Here to Buy Now

Zediker Publishing The Competitive Ar-15

(5.0)


Buy Zediker Publishing The Competitive Ar-15

Brownells has a great price on the Zediker Publishing The Competitive Ar-15, at only $29.95.

Compiled and edited by Glen D. Zediker, 300 pages, photo illustrated, 9″ x 11″, Softbound. Covers modifying, shooting, maintaining and handloading a match-grade AR-15 for NRA High Power Service rifle, Match Rifle, IPSC Practical Rifle, sniper, varmint and other special purpose applications. Includes interviews with top AR-15 shooters, gunsmiths, barrel makers, ammunition producers, parts designers and manufacturers. Mfg: Zediker Publishing

Click Here to Buy Now

Brownells Ar-15/M16/Ar-Style .308 Benny Hill “rolling Thunder” Compensator

(4.0)


Buy Brownells Ar-15/M16/Ar-Style .308 Benny Hill

We found a great deal on the Brownells Ar-15/M16/Ar-Style .308 Benny Hill “rolling Thunder” Compensator for only $108.99 at Brownells.

Heavy duty compensator designed by noted custom gunsmith and 3-gun competitor Benny Hill employs a unique internal expansion chamber that redirects some of the combustion gas out a topside gas port to virtually eliminate muzzle climb. The sights stay on the target, so you can make exceptionally fast follow up shots. Precision machined from a solid billet of high-grade stainless steel, with large side ports that vent more gas to help reduce felt recoil. Solid bottom prevents dust signature when shooting close to the ground. Perfect for USPSA and 3-gun competition where seconds count, and for varmint hunters who want the sight to stay the target when they take a shot. Models available for rifl Mfg: Brownells SPECS: Stainless steel, natural finish. .223 fits AR-15 chambered in .223/5.56 with 1/2″-28 tpi muzzle threads. .308 fits AR-style rifle chambered in .308/7.62 with 5/8″-24 tpi muzzle threads.

Click Here to Buy Now

Samson Manufacturing Corp Ar-15/M16 Quickflip~ Folding Rear Sight

(4.0)


Buy Samson Manufacturing Corp Ar-15/M16 Quickflip~ Folding Rear Sight

We found a great deal on the Samson Manufacturing Corp Ar-15/M16 Quickflip~ Folding Rear Sight for only $109.99 at Brownells.

Machined aluminum tactical sight deploys at the touch of a button to provide immediate backup if your primary optic fails. Spring loaded mechanism locks positively in both deployed and folded positions, and is protected from dust and dirt. Deeply grooved knob with positive clicks allows easy windage adjustment. Locking bar and cross-bolt clamping system locks securely to a Picatinny rail using just a slot-head screw driver. Both models regulate correctly with an A2 front sight or Samson QuickFlip FFS Front Sights for AR-15/M16 or SIG 556, available separately. Dual A2 Aperture model has a folding A2-type aperture with a large, .197″ diameter peep for short-range or low-light shots, and Mfg: Samson Manufacturing Corp SPECS: Machined 6061 T6 billet aluminum, hardcoat anodized, matte black. Dual A2 Aperture 7/8″ (2.2cm) long when deployed, 2″ (5.1cm) long when folded, 1 1/4″ (3.2cm) wide. CQB 7/8″ long when deployed, 2″ long when folded, 13/8″ (3.

Click Here to Buy Now

Links