Button rifled and fully machined to very tight tolerances for unmatched accuracy. Designed for match rifles with free-float tubes and flat top receivers. Integral muzzle brake greatly diminishes recoil and muzzle flip. Sleek, contoured gas block will not obstruct view with low-mounted scopes or red dot optics. Legal for installation on both pre- and post-ban receivers. SPECS: 410 stainless steel, bright-machined finish. Chambered .223 Rem. 1-9″ twist, nominal 16″ (40cm) or 20″ (50cm) long, .951″ (24mm) dia. under the handguard. Compensator adds 11/4″ (3.1cm) to overall length. Includes gas block and barrel extension.
A full stock, with the same length as a collapsed M4, CAR stock; quick to shoulder, fast handling and maneuverable in confined or restricted areas. Provides a consistent and comfortable cheek weld for greater control and accuracy. Compact dimensions reduce overall length to 32″ when used with a 16″ barrel. Furnished with carbine-length buffer, tube and recoil spring. SPECS: Fiberglass/kevlar, black, matte finish. 7″ (17.8cm) long.
Rugged, lightweight, high-capacity magazine designed for 9mm AR-15 conversions like Colt and Rock River Arms that use a Colt or modified UZI magazine. Tough, molded polymer construction resists damage if dropped on a hard surface, and the anti-tilt follower ensures smooth movement of the round stack for reliable feeding. Easy to remove floorplate makes disassembly for cleaning fast and simple. Requires a lower receiver conversion block, available separately. SPECS: Molded polymer, matte black. 32-round capacity.
Extra-thick handle includes a gas defection groove to protect shooters face and eyes from oil and gas blowback. Extended finger latches offer easier loading, faster jam clearing; improves speed when performing immediate action drills. Flat Latch has a deep hook contour that gives your finger better purchase to quickly retract the bolt while wearing gloves. Military Latch has smooth latch face with round edges that is easy on your fingers, less painful during lengthy firing sessions. SPECS:Aluminum, black, matte finish.
Rugged, machined aluminum components with weather resistant seals withstand the rigors of rough, field use. Provides brilliant, target-illuminating light on demand. Clamps to the side of the front sight post, out of the field of view. Machined aluminum light can be removed from mount. Puts out 65 lumens of light from two, 123A, lithium batteries. Weather resistant seals and knurled grasping surfaces. Operated by a fingerpad, momentary pressure switch, that attaches along the handguard. SPECS: Machined aircraft aluminum, black, anodized finish. Length – 5 ” (14cm). Includes batteries, instructions.
Precision machined from tough, stressproof steel with square-profile fingers that grip the sight notches firmly and won’t “roll out”; provides easy, exact sight adjustment. Plus, they resist bending and breaking to give years of service. Deeply drilled body fits both issue and tall blade sights. An extra-nice touch are the hex-shaped bodies; they’re easy to grasp, easy to turn and won’t roll off your bench. Three tools: A1 five-prong and A2 four-prong fit front and rear sights. A1/A2 is double ended to fit both five-detent A1 and four-detent, square blade, A2 front sights only. Check out the video demonstration of the AR-15 Sight Wrench. SPECS: Stressproof steel, blue finish. A1: five-prong and A2: four-prong (adjusts front and rear). 1-3/8″ (3.5cm) long x ” (19mm) dia. A1/A2: 2 ” (6.4cm) long four-prong/five-prong front only wrench.
Injection-molded, reinforced, polymer-resin mount makes it easy to use your flashlight in tactical situations. Screw-adjustable, radiused pads hold light tightly in place; push-button locking system gives quick attachment and removal. Use on AR-15/M16, Glock, Sig, and Smith & Wesson guns equipped with Picatinny or Weaver-style rails. Mfg: Command Arms Acc SPECS: BK 1 Mount – Polymer, green 1-7/8″ (4.7cm) long. 1-5/8″ (4.1cm) high. .75″ (1.9cm) I.D.
The CHR rifle/pistol rod combined with a bronze/steel bristle brush keeps the critical locking lug area clean and free from fouling. SPECS: Brass rod, plastic handle. 8-32 tpi. 12 ” (31.1cm) long.
Steel adapter allows you to install muzzle brakes and flash hiders on tactical rifles with an unthreaded barrel. No machining necessary; four setscrews secure adapter to barrel in seconds. C-1 Adapter features 14mm-1.0 lefthand threads for 7.62×39 caliber AK-47 and SKS rifles. C-5 Adapter has -28 threads for installation on Colt sporter and similarly contoured, AR-15 barrels. SPECS: Steel, blued finish. C-1 – 1-3/16″ (3cm) long, .552″ (14mm) I.D., .830″ (21mm) O.D. Fits AK-47 and SKS. C-5 – 1-3/16″ long, .708″ (18mm) I.D., .978″ (25mm) O.D. Fits Colt AR-15.
The new Advanced Modular Chassis System is the direct result of long-range shooting. The JP chassis delivers the best of all worlds. The cheek piece can be raised to accommodate an AR-15-type optics mounting system like the JPFTSM-30 with the line of bore relative to shoulder identical to the gas gun. Combined with the palm shelf grip, you have the most comfortable chassis system with the most linear impulse feel and reduced muzzle rise possible. For a more traditional bolt gun setup, you need only lower the cheek piece and use your preferred standard height rings. The Advanced Modular Chassis System is completely machined from 6061 T6 aircraft-grade aluminum with a mil-standard bl Mfg: J P Enterprises
