Super-capacity, dual drum magazine allows you to spend more time shooting and less time reloading. 100-round capacity is great for extended shooting sessions with inexpensive surplus ammunition. Even weight distribution ensures a well-balanced weapon that’s not cumbersome or awkward to shoot. Included tool provides easy loading, simply push five rounds at a time into the interlinking straight clip to automatically double stack and alternately load both drums. Polymer composite body is available in solid Black, or black with a Clear drum face to allow visual check of remaining ammo. Steel hardware and aluminum feed rails provide years of reliable service. Includes two tubes of graphite lubricant for optimal feeding, plus a snap-on, synthetic cover to keep dirt from entering the follower end of the magazine. Double-stitched, nylon carry case attaches to your web belt and includes individual compartments for the magazine, loading tool, and graphite tubes. Check out the 360 Image of The Beta Company C-Mags. Check out the segment from Jerry Miculek Practical Rifle where he demonstrates proper technique for shooting off of rooftops using a C-Mag. SPECS: Polymer composite body, aluminum feed rails, steel hardware. Available with solid black housing or black with clear drum face. Accepts .223 caliber. 2-5⁄8″ (6.7cm) long, 10” (25.4cm) wide, 4” (10.2cm) high. 2.24 lb. (1kg) weight.
Exceptionally rugged, combat- and competition-ready magazine functions flawlessly, even when left fully loaded for extended periods. Corrosion-proof, self-lubricating one-piece body of fiber-reinforced, molded polymer has no spot welds or joints to impair the follower, and the constant internal curve ensures smooth, unobstructed movement of the round stack. Anti-tilt follower stabilizes the stack to help prevent nose-diving and bolt-over-head failures. Heat-treated, stainless steel spring is stress-relieved for optimal performance. Included quick-release magazine cover seals out dirt and alleviates feed lip deformation caused by pressure from a full ammo stack during long-term storage. Withstands the heat from prolonged full-auto fire and is not harmed by most bore cleaners and solvents. Exterior ribbing provides added gripping surface; magazine catch notch, rather than a traditional hole, keeps dirt and debris out. Easy-to-grasp ledge on floorplate aids in extracting magazine from pouches; floorplate removes easily for cleaning. Curved-body 30-Round model is also available in MagLevel configuration with windows on both sides of the magazine and a bright, orange indicator to display ammo level. Compact, straight-body 20-Round model makes a tactical rifle easier to store and retrieve from a vehicle, and provides a stable rest for target shooting. All models available in Black, Flat Dark Earth, O.D. Green, and Foliage Green. SPECS: Molded polymer, stainless steel spring. 20- or 30-round capacity. Available in Black, Flat Dark Earth, O.D. Green, and Foliage Green.
M4-style receiver extension tube has six precision-machined notches on the underside for maximum flexibility in setting length-of-pull with adjustable buttstocks. Lets you install a mil-spec stock on a civilian carbine or refit a rifle with an A2-style fixed buttstock with an adjustable M4 stock. Outside diameter of tube is machined approximately .003″ oversized for snug, rattle-free fit of stocks designed for mil-spec extensions. Lightly sand interior of stock to get just the right combination of snugness and freedom over movement. Machined from a lightweight aluminum extrusion before hardcoat anodizing with a wear-resistant matte black finish. Rifle conversion also requires a carbine action spring and buffer, available separately. SPECS: Aluminum, hardcoat anodized, matte black. 7 ” (18.2cm) long, 1.149” O.D.
Completely covers the rail and contoured to give a rounded shape to Picatinny or Weaver-style rails. Grippy synthetic rubber snaps securely over rail and provides an excellent grasping surface. Long model has raised diamond-plate texture. Short model has two raised gripping ridges. SPECS: Synthetic rubber polymer, black or Coyote Brown. Long model is 5 ” (14.6cm) long x 1 ” (3.8cm) wide. Short model is 1 ” (4.5cm) long x 1 ” wide; sold in 12 pak.
Compact, height adjustable monopod eliminates the need for cumbersome rear sandbags and provides a rock-solid rest for shot-to-shot consistency. Features a 4140 steel, adjustable leg that extends up to 4″ vertically for coarse elevation adjustments and a micro-adjustable foot for fine-tuning. Extra long, polycarbonate lever provides plenty of leverage to lock the monopod leg in position. Lightweight, 6061 aluminum buttplate is hardcoat anodized for durability. Large, horizontal serrations provide a non-slip grip against the shoulder. Fits fixed, mil-spec buttstocks on AR-15 and AR-10 rifles (A1 and A2 variants). Includes new bottom mounting screw. Requires use of original top mounting screw. SPECS: 6061 aluminum buttplate, 4140 steel leg and foot, polycarbonate lever, black, matte finish. 5-3⁄16″ (13.2cm) long, 1-5⁄8″ (4.1cm) wide, 5⁄8″ (1.6cm) thick. 10.2 oz. (289g) weight. Fits mil-spec fixed buttstock on AR-15 and AR-10 rifles (A1 and A2).
Drop-in replacement for factory buffer shortens stroke and reduces recoil on pistol caliber AR-15 conversions with collapsible M4 carbine-type stocks. Extra weight behind carrier reduces cyclic rate for improve controllability, feeding, and extraction on full-auto carbines. Self-contained unit with long head consists of long-wearing, precision-machined, cold-rolled Parkerized steel exterior, fully enclosed 8 oz. lead insert, and polyurethane bumper. Will not work with rifle caliber uppers. Installation of this buffer is mandatory on Cavalry Arms CAV-15 Mk II receivers converted to .45 ACP with the Hahn Precision Grease Gun Adapter to prevent receiver damage. SPECS: Cold-rolled steel exterior, Parkerized, matte dark gray; lead insert; polyurethane bumper. 3-11⁄16″ (9.4cm) long. Fits rifles and carbines with pistol caliber upper receiver and collapsible M4 carbine-type stock.
Feeding problems and jams in your AR-15 can often be attributed to bent or malformed magazine feed lips. This easy-to-use tool is designed specifically to bend the feed lips back into place, so they guide the cartridge body like they’re supposed to. Trying to straighten the lips with pliers can create rough, unsightly gouges, or worse yet, cracks in the metal that can’t be repaired. The machined, steel shank with bevel cut and slot allows you to hook the lips and keep them supported, while you tweak their angle of contact on the cartridge case. Helps you recondition those old magazines, and saves the cost of buying new ones. SPECS: Handle – Impact-resistant polymer, black. Shank – Steel, blued finish. 5 ” (14cm) long.
Semi-auto, small pin lower receivers are premium-quality forgings machined to precise dimensions and ready to serve as the foundation of a fully customized tactical, competition, or hunting rifle. Exceptionally strong, rigid 7075 T6 aluminum forging has extra metal in the right places for added strength without unnecessary bulk. Features a beefy, M16A2-pattern reinforced area around the front pivot pin, a strengthening ridge over the receiver extension threads, and a ridge around the mag release button to guard against accidental magazine drop by preventing unintentional button activation. Bead blasted after machining to ensure a uniform, non-reflective surface before application of lusterless black military hardcoat A8625, Type III, Class 2 anodized finish that adds surface strength and resists abrasion. A final, nickel acetate seal coat provides extra protection against corrosion. Available as a complete, fully assembled lower, with fire control system, pistol grip, receiver extension, buffer, spring, and buttstock installed and ready for the upper receiver of your choice. Choose adjustable, six-position M4-style buttstock of high-impact, molded polymer, or fixed, A2 buttstock with “trapdoor” storage compartment just like original USGI rifles. Both stocks include sling loop at the toe. Stripped Lower is the perfect companion for Bushmaster Lower Receiver Parts Kit, available separately, and the receiver extension/buttstock system of your choice. SPECS: Receiver – 7075 T6 aluminum, hardcoat anodized, matte black. Buttstock Reinforced molded polymer. .154″ hammer/trigger pin holes. .250″ pivot pin holes. FFL required for purchase.
Lightweight, machined aluminum forend combines the accuracy-improving benefit of free-float attachment with four Picatinny rails for customized mounting of tactical accessories. One-piece free-float design attaches directly to upper receiver with the included barrel nut to eliminate pressure points on the barrel that can compromise accuracy. Large vent holes help keep weight to a minimum and ensure plenty of air circulation to cool barrel. Unobstructed interior provides adequate internal clearance for most gas piston systems, and allows installation on a rifle/carbine with a gas system shorter than the handguard if a low-profile gas block is also installed. Clean, streamlined exterior has no gap between receiver rail and top rail of handguard. Slots are marked with white, laser-etched alphanumeric position markers for precise positioning of accessories and fast, repeatable configuration changes. Includes anti-rotation pin to keep handguard aligned. Requires removal of factory barrel nut and delta ring. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. All models 2.4” (6.1cm) wide x 2.4” high. T7 – 7” (17.8cm) OAL. Fits AR-15/M16 with carbine-length gas system. T9 – 9” (22.9cm) OAL. Fits AR-15/M16 with mid-length gas system or shorter gas system with low-profile gas block. T10 – 10” (25.4cm) OAL Fits AR-15/M16 with carbine-length gas system and low-profile gas block. T12 – 12” (30.5cm) OAL. Fits AR-15/M16 with rifle-length gas system or shorter gas system with low-profile gas block.
These flat wire, high-quality action/buffer springs from champion shooter David Tubb will perform flawlessly and are duty rated for 500,000 compression cycles at maximum performance. Made to “extra power” specs without the extra material, these springs are surprisingly lightweight, yet exttremely durable. Gives correct timing and resistance on the recoil stroke and a controlled rebound ensures reliable feeding with consistent forward thrust on every shot. Keeps the bolt locked a little longer to allow pressures more time to subside for perfect cycling. SPECS: Chrome silicon steel. AR-15 fits both fixed and collapsible stocked AR-15 rifles and carbines without modification to spring or gun. AR-Style .308 fits standard length rifles only.
