Archive

Archive for July, 2010

Dpms Ar-15 Round Handguards

(5.0)


Buy Dpms Ar-15 Round Handguards

The Dpms Ar-15 Round Handguards is only $27.95 at Brownells these days, which seems to be a pretty good price.

Strong, comfortable-to-hold replacement for the older, triangular handguards. Raised ribs improve grasp for easier carry and firing. Constructed from mil-spec, thermo-set resin for improved strength and durability. Includes aluminum heat shield. Fits standard or delta slip ring. SPECS: Plastic resin, black. A-2 Long; 12″ (30.5cm) long. Fits AR-15 with 20″ barrel. AR-15 Short; 6 ” (17.1cm) long. Fits CAR-15 with 11.5 or 16″ barrel.

Click Here to Buy Now

Precision Reflex, Inc. Ar-15/M16/Ar-10 Barrel Nut Wrench

(4.5)


Buy Precision Reflex, Inc. Ar-15/M16/Ar-10 Barrel Nut Wrench

Brownells has a pretty good price on the Precision Reflex, Inc. Ar-15/M16/Ar-10 Barrel Nut Wrench, for only $24.95.

Heavy-duty wrench provides plenty of leverage for installing and removing barrel nuts when used with a 3/8″ or ” drive breaker bar, socket wrench, or torque wrench. Cut from 3/8″ thick steel, with plenty of metal so it won’t flex under pressure while transferring the torque evenly to the nut. Models available for AR-15/M16 and ArmaLite AR-10 . SPECS: Steel, Parkerized, dark gray. AR-15 fits AR-15/M16/M4 and clones. AR-10 fits ArmaLite AR-10 only.

Click Here to Buy Now

J P Enterprises Ar-15/M16 Bennie Cooley Tactical Compensator

(4.0)


Buy J P Enterprises Ar-15/M16 Bennie Cooley Tactical Compensator

The J P Enterprises Ar-15/M16 Bennie Cooley Tactical Compensator is only $89.95 at Brownells these days, which seems to be a pretty good price.

Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1″ x 3″ size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750″ or .875″ O.D. at muzzle. Large Profile is a beefed-up version of Standard model for .875″ O.D. bull barrels and has extra baffle surface area for maximum reduction of felt recoil while retaining the cosmetics of the Standard series. Not legal for Limited Tactical Division competition. SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with “-28 threads. .281″ I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile 2-5⁄16″ (5.9cm) long, .989″ (2.5cm) O.D. Models to fit .750″ (1.9cm) and .875″ (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal. Large Profile 2 ” (7cm) long, 1.22″ (3.1cm) O.D. Fits .875″ O.D. barrels. Not Limited/Tactical Division competition legal.

Click Here to Buy Now

Safariland Ar-15/M16 Rk-M4 Forend Rail Mount

(4.5)


Buy Safariland Ar-15/M16 Rk-M4 Forend Rail Mount

The Safariland Ar-15/M16 Rk-M4 Forend Rail Mount can be found at Brownells for $39.99, which is a pretty good price.

Rugged polymer mount is the quickest way to get accessory rails up front without having to get a new handguard or modify your rifle. Clamps securely over the factory plastic handguard to provide rail mounting space for lights, lasers, IR illuminators, vertical grips, bipods, and other tactical accessories. Provides one 3 ” bottom rail along the centerline of the barrel and two 1 ” long top rails offset at a 45 angle to allow installation of a weaponlight or laser sight without interference from front sight. Reversible design can be mounted upside down. Reinforced injection-molded polymer is strong, yet lightweight, with no sharp edges to snag on gear. SPECS: Injection-molded polymer, matte black. 3 ” (9.5cm) long x 3” (7.6cm) wide x 3 ” (8.9cm) high. 3 oz. (86g) weight. Mounting hardware and installation instructions included.

Click Here to Buy Now

Brownells Ar-15/M16 Dust Cover Safety Flag

(4.5)


Buy Brownells Ar-15/M16 Dust Cover Safety Flag

Brownells has a pretty good price on the Brownells Ar-15/M16 Dust Cover Safety Flag, for only $6.99.

Bright, highly-visible yellow insert instantly lets the RSO and other shooters know your weapon is unloaded and safe. Perfect for training exercises and classroom activities where it’s vital to quickly identify that weapons are safe at all times. Blocks the chamber to ensure that a round cannot be loaded when the flag is installed. Completely seals the ejection port to keep out dust, dirt, and other debris. SPECS: Plastic, yellow.

Click Here to Buy Now

Desert Publications Build Your Own Ar-15

(4.0)


Buy Desert Publications Build Your Own Ar-15

Brownells has a great price on the Desert Publications Build Your Own Ar-15, at only $19.95.

Duncan Long. 98 pages. 5 ” x 8 “. Softbound. Comprehensive, how-to guide walks you through every step of building your own AR-15. Includes information on how to build your gun according to post-ban regulations. More than 40% of the book is devoted to assembly instructions; including easy-to-understand text and helpful illustrations.

Click Here to Buy Now

J P Enterprises Ar-15 Adjustable/Reversible/Ambi Safety Selector

(4.0)


Buy J P Enterprises Ar-15 Adjustable/Reversible/Ambi Safety Selector

Brownells has a pretty good price on the J P Enterprises Ar-15 Adjustable/Reversible/Ambi Safety Selector, for only $50.99.

Easy-to-install, reversible safety selector ensures ultra-reliable engagement and eliminates the time-consuming job of “fitting the safety” to a factory or aftermarket trigger—the perfect upgrade to accompany a J.P. Enterprises Adjustable Trigger. Eliminates the risk of damaging the trigger during fitting and shortens installation time by as much as one-third. An adjustment screw on the selector drum lets you quickly and easily set the correct trigger/safety relationship to completely block trigger movement when the selector is set to “safe.” A second screw inside the drum ensures the adjustment screw stays locked in place. Deeply grooved control pad gives positive thumb engagement even when wearing gloves, and can be installed in the standard position on the left-side of the receiver or on the right side for fast, natural operation by left-handed shooters. Add the Ambi Selector Lever to give your rifle a safety lever on both sides of the receiver for fully ambidextrous operation. Ideal for tactical and competition shooters who may need to operate the selector with the weak hand to accommodate an unconventional shooting position or if the strong hand is injured. SPECS: Steel with aluminum control pad, matte black finish. Installation instructions included.

Click Here to Buy Now

Springer Precision Llc Ar-15/M16 Firebird Pmag Coupler

(4.0)


Buy Springer Precision Llc Ar-15/M16 Firebird Pmag Coupler

We found a great deal on the Springer Precision Llc Ar-15/M16 Firebird Pmag Coupler for only $42.99 at Brownells.

Rugged, yet lightweight, machined aluminum coupler puts extra firepower at your fingertips by clamping two Magpul PMAGs together, so your reload is right next to the mag in the gun. Saves you valuable seconds during competition or combat that would otherwise be lost fumbling for the spare mag in a pouch and raising it to the weapon. Simply remove the factory floorplates from two PMAGs and slip them into the Firebird. One-piece aluminum construction, with rounded edges and smooth contours makes it as easy and comfortable to grasp as a single magazine. Ensures proper clearance for access to magazine release button and bolt release. SPECS: Aluminum, hardcoat anodized, black finish. 30/30 – Holds two 30-round PMAGs; will not work with 20-round PMAGs. 20/30 – Holds a 30-round PMAG in the left-hand position and a 20-round PMAG in the right-hand position.

Click Here to Buy Now

Cmmg Ar-15/M16 Gas Piston Conversion Kit

(4.5)


Buy Cmmg Ar-15/M16 Gas Piston Conversion Kit

We found a great deal on the Cmmg Ar-15/M16 Gas Piston Conversion Kit for only $299.99 at Brownells.

Drop-in conversion kit contains everything needed to replace the standard gas system on a AR-15/M16/M4 carbine with a reliable, positive cycling direct impingement gas piston system. Updates AR to the type of operating system used on advanced weapons like the FN SCAR, Heckler & Koch G36, and HK416, as well as the highly reliable, classic FAL and AK-series rifles. Makes weapon run cooler, smoother, and more reliably, with less wear and easier maintenance. Because the gas no longer vents inside the receiver, fouling and carbon buildup are greatly reduced, requiring less frequent disassembly of the receiver for cleaning. Less fouling and lower operating temperatures mean substantially reduced wear on bolt, carrier, and receiver interior for fewer malfunctions caused by worn parts. Piston’s cushioning effect reduces felt recoil to help you stay on target for better control during rapid fire and fast, accurate follow-up shots. “Straight-line” design of the replacement gas block further ensures reliable operation by venting gas pressure directly on the operating rod. Rod transmits the force directly to a lug on the top side of the one-piece bolt carrier redesigned specifically to work with the piston system. Carrier is machined from a solid billet of steel with an integral impingement lug to eliminate breakage that can occur with a standard carrier modified for use with a gas piston system. A knob on the gas block allows gas flow to be shut off to allow use of a suppressor or a .22 LR conversion kit. Kit may be installed on semi-auto and burst/full-auto rifles, as well as ARs chambered in non-standard calibers, including 6.8 SPC and 5.45 x 39. Requires no permanent alterations to barrel or upper receiver; remove piston system any time and reinstall the original parts. SPECS: Piston Tube, Bolt Carrier, Handguard Retainer Cap – Steel, black oxide finish. Piston – Steel, hard-chromed. Gas Block – Aluminum, hardcoat anodized, matte black. Handguard – Reinforced polymer composite, black. Kit contains preassembled piston assembly, gas block, bolt carrier, handguard, handguard retainer, mounting hardware, and installation instructions. Does not include bolt assembly. Fits semi-auto and burst/full-auto rifles with carbine-length gas system and .750” O.D. barrel. Gunsmith installation recommended.

Click Here to Buy Now

Rock River Arms Ar-15/M16 Dominator2 Eotech Mount

(4.0)


Buy Rock River Arms Ar-15/M16 Dominator2 Eotech Mount

The Rock River Arms Ar-15/M16 Dominator2 Eotech Mount is only $185 at Brownells these days, which seems to be a pretty good price.

Rugged tactical mount provides secure attachment for an EOTech holographic weapon sight with correct elevation for co-witnessing iron sights through the optic. Clamps to flattop receiver and positions the EOTech’s dot just above the factory front sight for fast transition from primary to backup sighting. Integral A2-style rear backup sight is adjustable for windage and elevation with two-position, flip-up aperture with .195″ diameter peep for close-range targeting, and .065″ peep for long range. Machined aluminum base has seven Picatinny slots on the top for mounting most EOTech models. Two, steel crossbolts snug the steel clamping bar tightly to the receiver rail for an installation that won’t shift under recoil. SPECS: Aluminum, hardcoat anodized, and steel, Parkerized, matte black finish. 7 ” (cm) OAL. Requires 6” of Picatinny receiver rail space. Compatible with current model EOTech holographic sights except 553 and 557.

Click Here to Buy Now

Links