Archive

Archive for June, 2010

Dewey Ar-15/M16/Ar-Style .308 Pull-Through Cleaning Kit

(4.0)


Buy Dewey Ar-15/M16/Ar-Style .308 Pull-Through Cleaning Kit

We found a great deal on the Dewey Ar-15/M16/Ar-Style .308 Pull-Through Cleaning Kit for only $38.95 at Brownells.

Convenient, pull-through kit contains everything you need, in one compact unit, to effectively and easily clean your AR-15/M16 or AR-style .308 rifle while on the move. Flexible cable with protective coating allows thorough cleaning without damage to the bore or muzzle end. Large, nylon bead slides along the cable and provides a non-slip grasp and easy pulling. Patch loop, brush connector, and sliding pull bead are permanent parts of the cleaning cable. Connector is 8″-32 tpi for rifle size brushes. Includes a oz. bottle of Shooter’s Choice FP-10 for cleaning, lubricating, and deep-penetrating corrosion protection. Compact, 1000 denier Cordura nylon pouch stores all components and stows easily in a range bag, pocket, or on your belt. Separate kits available for AR-type rifles chambered in .223/5.56mm, 6.8mm/.243/.260, and .308/7.62mm. SPECS: Coated 30” cleaning cable with 8”-32 female end, brass loop, bronze/steel chamber brush, coated steel T-handle chamber rod, brass stuck case remover, brass scraper & brass/steel pick, nylon bore brush; oz. bottle of Shooter’s Choice FP-10, assorted cotton patches, and 1000 denier Cordura nylon pouch.

Click Here to Buy Now

Boonie Packer Products Ar-15/M16 Improved Redi-Mag

(4.0)


Buy Boonie Packer Products Ar-15/M16 Improved Redi-Mag

Brownells has a great price on the Boonie Packer Products Ar-15/M16 Improved Redi-Mag, at only $79.99.

Don’t lose precious seconds in competition or combat fumbling for a spare magazine during a reload. Rugged, all-steel speed loading system clamps directly to the receiver of any AR-15/M16 rifle or carbine and securely holds a second, fully loaded magazine alongside the mag well for super-fast mag changes. More reliable and easier to use than improvised methods, like taping two magazines together, that can cause malfunctions at critical moments. Closed-top design protects the spare mag from rain, dirt, dust, and debris and prevents the top round from jumping forward under recoil. Independent release system lets you drop the spare mag and the mag in the weapon separately to allow tactical reloads and greater flexibility in clearing malfunctions. Includes Bolt Catch Extension (BCE) that mounts directly to the factory bolt catch and lets you release the bolt, with or without the Redi-Mag attached to the gun, simply by slapping the BCE with an open palm. Installation requires no permanent alterations to receiver or mag well. Available in Standard configuration and Quick-Attach model that enables faster installation and removal of the entire Redi-Mag from the weapon. SPECS: Steel, Parkerized finish, dark gray, with reinforced molded polymer BCE and spacer. Approximately 3 ” (8.9cm) long, 2 ” (6.4cm) wide, 2 ” (7cm) high. 8.4 oz. (234g) weight. Fits AR-15/M16/M4 rifles and carbines.

Click Here to Buy Now

Hogue Ar-15 Overmolded Forend

(4.5)


Buy Hogue Ar-15 Overmolded Forend

Brownells has a pretty good price on the Hogue Ar-15 Overmolded Forend, for only $59.95.

Machined aluminum free-float forends provides an exceptionally positive, non-slip gripping surface for the support hand to help ensure maximum weapon control. Easy-to-install, two-piece free-float design eliminates handguard stress on the barrel that can compromise accuracy. Use with rifle’s factory gas tube; if changing barrel length, purchase replacement gas tube of appropriate length. Rifle- and carbine-length models available in all-aluminum Ridged design or cobblestone-texture Overmolded™ rubber grasping surface. Kits include an Overmolded pistol grip with a shock-absorbing pebble-textured rubber covering, palm swells, and finger grooves for increased shooting comfort. SPECS: Forend – Aluminum, hardcoat anodized, matte black, with synthetic rubber covering on Overmolded models. Rifle – 12 ” (31.1cm) long, 2” (5cm) diameter. Fits AR-15/M16 and clones with rifle-length gas system. Carbine – 7-1⁄8” (17.8cm) long, 2” diameter. Fits AR-15/M16/M4 and clones with carbine-length gas system. Pistol Grip – Molded synthetic rubber exterior over fiberglass core, black.

Click Here to Buy Now

Norgon Ar-15/M16 Ambi-Catch Tool

(4.5)


Buy Norgon Ar-15/M16 Ambi-Catch Tool

We found a great deal on the Norgon Ar-15/M16 Ambi-Catch Tool for only $6.95 at Brownells.

Convenient, patented tool gives you the leverage to keep the magazine release button completely depressed while removing the magazine catch. No more pinched, numb fingers or awkward balancing with a pen or plastic drift punch. You can hold the rifle and press down on the button with one hand and unscrew the catch with the other. Perfect for installing the Norgon Ambi-Catch, or for removing and reinstalling the fact ory catch during maintenance-as long as your rifle has the factory release button. One-piece construction of tough, solvent- and oil-resistant molded polymer. Fits easily in range bag, tool pack, or pocket. SPECS: Molded polymer in Black, Flat Dark Earth, or O.D. Green. Fits AR-15/M16/CAR-15/M4 with factory magazine release button.

Click Here to Buy Now

Colt Ar-15/M16 Upper Receiver

(4.0)


Buy Colt Ar-15/M16 Upper Receiver

We found a great deal on the Colt Ar-15/M16 Upper Receiver for only $210.99 at Brownells.

Build your next custom AR-15 with an original Colt factory upper fully finished and ready for installation. Made from a high-quality aluminum alloy forging machined to precise tolerances for correct fit on Colt lowers and clones. Hardcoat anodized for added surface strength, abrasion resistance, and corrosion protection, with a uniform, matte black finish that matches other factory components and easily accepts alternate finishes. These are “stripped” receivers (except as noted below), so you can select the bolt assembly, carrier, gas key, and other components to suit your specific needs. All models designed to accept spring-loaded ejection port covers. Carry Handle Classic, carry handle configuration of U.S. military M16A2 rifles. Models for.223/5.56 and 7.62 x 39 chamberings come with forward assist housing and shell deflector behind the ejection port, and are pre-cut for A2-style adjustable rear sight assembly (not included). 9mm upper does not have shell deflector or provisions for forward assist; accepts original A1-type rear sight. Flattop for.223/5.56 rifles and carbines has topside Picatinny accessory rail for mounting optics and red dot sights. White alphanumeric position markers on rail slots aid in removal and reinstallation of sights without loss of zero. Available stripped or with forward assist and ejection port cover installed. SPECS: Aluminum, hard anodized, matte black. Fits standard Colt AR-15 lowers and clones with .250″ pivot pins.

Click Here to Buy Now

Olongapo Outfitters Ar-15/M16 Grab & Go Magazine Pouch

(4.5)


Buy Olongapo Outfitters Ar-15/M16 Grab & Go Magazine Pouch

We found a great deal on the Olongapo Outfitters Ar-15/M16 Grab & Go Magazine Pouch for only $66.99 at Brownells.

Heavy-duty magazine pouch made from top-quality mil-spec materials slings over your shoulder, so you can easily carry up to eight, fully loaded magazines while on the move. Constructed of woven, water-repelling ballistic nylon that resists tearing and fraying. Heavy-duty stitching won’t give way under stress, and all exposed edges are protected with tape binding. Adjustable carry strap of extra-tough nylon webbing lets you position the pouch exactly where you need it for fast reloads. Each compartment has a separate flap, so you won’t expose the other mags to the elements when you retrieve one. Generously proportioned hook-and-loop fasteners keep the flaps securely closed, yet release easily when you need a fast reload. Grommetted drain holes ensure mags don’t get water-logged when you’re on patrol in the rain. Large pocket behind the mags, with full-width hook-and-loop closure, provides storage for maps or other flat items. Models available for 30-round .223/5.56mm AR-15/M16/M4 magazines and UZI-style 9mm stick mags. Pockets on .223/5.56 pouch have plenty of length to accommodate magazines fitted with the Magpul Ranger Floorplate, including Brownells Tactical Magazines. Both models available in Coyote Brown and O.D. Green. SPECS: Heavy duty ballistic nylon, Coyote Brown or O.D. Green. .223 – 12 ” (31.8cm) long 8” (20.3cm) high. Holds eight 30-round magazines. 9mm – 12 ” long 9 ” (24.1cm) high. Holds 6 UZI-style 9mm stick magazines.

Click Here to Buy Now

Truglo Ar-15/M16 Brite-Site

(4.5)


Buy Truglo Ar-15/M16 Brite-Site

Brownells has a great price on the Truglo Ar-15/M16 Brite-Site, at only $89.95.

TFO technology combines the brightness of fiber optics with the glowing properties of tritium to produce a highly visible, bright green dot that keeps you on target, day or night. Radial designed fiber optic rod with tritium tube bends 90 degrees around a machined steel base to keep the sight protected and as compact as possible. Included, steel wrench makes installation easy and allows precise elevation adjustments. Directly replaces sight post in mil-spec front sight housing; spring with retaining nut holds adjustments tight and keeps sight from shaking loose during sustained fire. SPECS: Steel, blued base with fiber optic/tritium rod. .42″ (1.1cm) long, .13″ (3.3mm) wide, .35″ (8.9mm) high. Includes sight, sight wrench, and installation dowel.

Click Here to Buy Now

Dpms Ar-15 Oversized Selector Switch

(4.0)


Buy Dpms Ar-15 Oversized Selector Switch

We found a great deal on the Dpms Ar-15 Oversized Selector Switch for only $29.95 at Brownells.

Long, wide thumb pad provides fast, sure safety operation when wearing gloves, or at times when speed is important. Upturned pad lip ensures positive thumb engagement for full selector travel and positive disengagement. Drop-in installation. SPECS: Steel, gray, parkerized finish. Heat treated. Fits AR-15 only. Thumb pad – 1.2″ (3.5cm) long, .525″ (13.3mm) wide.

Click Here to Buy Now

Alley Supply Site-A-Line Sweany Ar-15/M16 Bore Spud

(4.0)


Buy Alley Supply Site-A-Line Sweany Ar-15/M16 Bore Spud

The Alley Supply Site-A-Line Sweany Ar-15/M16 Bore Spud can be found at Brownells for $39.99, which is a pretty good price.

Extra length and height. 5″ (12.7cm) long, 1-7⁄8″ (9cm) high. Aluminum block, steel spud.

Click Here to Buy Now

Mwg Ar-15 Plastic Magazine

(4.5)


Buy Mwg Ar-15 Plastic Magazine

We found a great deal on the Mwg Ar-15 Plastic Magazine for only $19 at Brownells.

Carry more clips with less extra weight. Made from light, extra-tough, nylon-impregnated, ABS plastic that’s impact resistant and won’t break down, rot or rust. Includes tempered steel springs and self-lubricating nylon followers. SPECS: Nylon ABS, black. Will fit M16.

Click Here to Buy Now

Links