Archive

Archive for May, 2010

Tangodown Ar-15 Rail Covers

(4.0)


Buy Tangodown Ar-15 Rail Covers

The Tangodown Ar-15 Rail Covers is only $24.99 at Brownells these days, which seems to be a pretty good price.

This SCAR Panel set was designed based on feedback from Special Forces. It features a slim design with an improved binary texture for added grip purchase. The locking tab fits easily to MIL-STD 1913 rails, while the panels are crafted from high strength, heat and impact resistant polymer, which also offers protection against barrel heat. Each set includes two panels.

Click Here to Buy Now

Cavalry Arms Shotgun Ar-15 Stock Conversion

(4.5)


Buy Cavalry Arms Shotgun Ar-15 Stock Conversion

The Cavalry Arms Shotgun Ar-15 Stock Conversion is only $280 at Brownells these days, which seems to be a pretty good price.

Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate, tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump, and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket buttstock and pistol grip, A1 adds a fixed postion, A-1 buttstock and standard AR-15 pistol grip, M4 includes collapible stock and pistol grip. SPECS: Conversion Unit – Aluminum, anodized, black, matte finish. Approximately 3.7″ (9.4cm) high, 3.4″ (8.6cm) long, 1″ (2.54cm) thick. Rail – Aluminum, anodized, black, matte finish. 7″ (17.8cm) long, .64″ (16.2mm) wide, .64″ high. A1 Stock – 14 ” (36.2cm) L.O.P. M4 Stock – 11 ” (28.6cm) – 14 ” (36.2cm) L.O.P. Available for Remington 870 or Mossberg 500/590.

Click Here to Buy Now

Hahn Precision Ar-15 9Mm Conversion Block

(4.5)


Buy Hahn Precision Ar-15 9Mm Conversion Block

Brownells has a pretty good price on the Hahn Precision Ar-15 9Mm Conversion Block, for only $175.

One-piece, machined aluminum block converts AR-15 lower receiver to 9mm. Compatible with all, Colt-type, 9mm upper receivers, the feed ramp is cut for reliable feeding with all types of ammo, including hollow point and frangible ball. Roller retention device holds block securely in receiver, prevents accidental release. Hardened steel ejector, feed ramp and bolt hold open give long service life; last-round-hold-open feature on bottom-loading model works when used with Colt magazines. Also works with modified UZI magazines but last-round-hold-open will not function. No receiver modification required. Top-Loading Block installs from the top of the lower receiver and Bottom-Loading Block installs from the bottom of the lower receiver. SPECS: Aluminum, black, matte finish.

Click Here to Buy Now

Troy Industries, Inc. Ar-15/M16 Low-Profile Gas Block

(4.5)


Buy Troy Industries, Inc. Ar-15/M16 Low-Profile Gas Block

Brownells has a great price on the Troy Industries, Inc. Ar-15/M16 Low-Profile Gas Block, at only $49.99.

Minimal-profile replacement for factory front sight/gas block won’t interfere with extended-length tactical forearms, while ensuring proper function of gas system for reliable cycling. Protrudes only .420″ above barrel, covers less than 1″ of barrel length, and adds only 1.4 oz. of weight. Compatible with M4-style carbines and M16A2/A3/A4-style rifles with any length, .750″ O.D. barrel. Two steel setscrews keep the block securely anchored to the barrel to prevent shifting even under the force of full-auto recoil. Black oxide finish matches most factory barrel finishes. SPECS: Carbon steel, oxide finish, matte black. .950″ (24mm) long. 1.375″ (3.5cm) overall height. 1.4 oz. (41g) weight. Fits AR-15/M16 with .750″ O.D. barrel at gas block mounting position. Includes hex-head setscrews.

Click Here to Buy Now

C. J. Weapons Acc. Ar-15/M16 Mk-16 Combo Tool

(4.5)


Buy C. J. Weapons Acc. Ar-15/M16 Mk-16 Combo Tool

The C. J. Weapons Acc. Ar-15/M16 Mk-16 Combo Tool is only $89.99 at Brownells these days, which seems to be a pretty good price.

Compact, all-in-one pocket toolkit has 11 basic tools needed to clean and service any AR-type rifle just about anywhere-at the range, in the field, on deployment. Think of it as a Swiss army knife for your rifle that’s so convenient and easy to use you may even reach for it at the workbench when other tools are available. U.S.A. made, all-steel construction with a durable, scratch-resistant black finish ensures years of service. Includes A1 (5-pin ) and A2 (4-pin) front sight adjustment tools, A1 rear sight adjustment tool, bolt carrier carbon scraper, screw-on 8-32 tpi bronze brush for cleaning bolt and bolt carrier key, pull-through bore cleaning cable with patch loop (also accepts the brush), broken shell extractor, receiver extension nut wrench for rifles with M4-style collapsible stock, screwdriver that also serves as a bolt face carbon scraper, small pin punch for disassembling bolt, and large pin punch for removing receiver takedown pins. Folds up into a compact 4 ” x 1 ” x 1 ” package that weighs a little more than a pound and fits in its rugged ballistic nylon case that clips to your belt with a sturdy spring steel belt clip. SPECS: Steel, black finish. 18 ounces (524g) weight. Fits .223/5.56 AR-type rifles including AR-15, M16A1/A2/A4, M4, and CAR-15. Instructions included.

Click Here to Buy Now

C. J. Weapons Acc. Ar-15 Gas Tube Cleaners

(4.5)


Buy C. J. Weapons Acc. Ar-15 Gas Tube Cleaners

We found a great deal on the C. J. Weapons Acc. Ar-15 Gas Tube Cleaners for only $11.99 at Brownells.

Extra long to let you scrub the full length of the gas tube. Highly-absorbent cotton carries solvent in and crud out. Regular use keeps gas tube free of fouling and carbon buildup for reliable function. SPECS: Cotton, wire core. 16″ (40.6cm) long, 1/8″ (3.2mm) dia. Package contains 50 cleaners.

Click Here to Buy Now

Gg&G, Inc. Car-15/M4 Agency Sling Adapter

(5.0)


Buy Gg&G, Inc. Car-15/M4 Agency Sling Adapter

Brownells has a great price on the Gg&G, Inc. Car-15/M4 Agency Sling Adapter, at only $31.5.

Clamps around the castle nut to eliminate any fitting issues associated with different sized buffer tube diameters. Use with a single point sling, or install a front sling mount for two-point sling attachment. Contoured clamping halves draw tight with Allen head cross-bolt for a solid, no-slip fit. Slotted version accepts 1 ” wide web slings; loop model accepts HK-style clasps and other clip-on sling fasteners. Precision machined from 7075 aluminum alloy and Mil-Spec Type III hardcoat anodized. Right Hand (RH) Slot attaches sling to left side of receiver for right-hand shooters. Left Hand (LH) Slot attaches sling to right side of receiver to accommodate left-hand shooters. Ambi Slot includes slots on both sides for ambidextrous attachment of web slings; Ambi Loop provides the same provisions for clip-on slings. SPECS: Aluminum, matte black. Fit AR-15 rifles and carbines with collapsible buttstocks. RH/LH Models – 5⁄8″ (1.7cm) long, 2″ (5.1cm) wide, 2″ (5.1cm) high. Ambi Models 5⁄8″ long, 23⁄8″ (6.1cm) wide, 2″ high.

Click Here to Buy Now

Sporting Conversions Tool Kits For Ar-15/M16/M4

(4.5)


Buy Sporting Conversions Tool Kits For Ar-15/M16/M4

The Sporting Conversions Tool Kits For Ar-15/M16/M4 is only $7.49 at Brownells these days, which seems to be a pretty good price.

The RIGHT way to repair and service the AR-15/M16/M4! These kits contain the tools the gunsmith or armorer needs to perform full maintenance and repairs of these rifles in the field or shop. Each tool is designed to do its job in the simplest, most effective manner to maintain and repair these guns correctly – and save time doing it. Standard Kit contains the tools needed to work on the AR-15 and the M16A1 through A4. Premium Kit contains all the tools of the Standard Kit, plus an additional 11 items necessary to repair and maintain the M4 carbine as well. Both kits come in a custom-fitted, hard-side tool box that’s made from nearly indestructible molded polymer resin and meets mil-spec MIL-C-4150 and ATA specifications. The Standard kit’s foam inserts are pre-cut with spaces for the M4 tools, so you can turn it into a Premium Kit anytime simply by adding the Upgrade Kit. SPECS: Standard Armorer’s Kit includes: 12 Ounce Ballpeen Hammer, ” Plastic/Brass Hammer, Firing Pin Protrusion Gauge, ” Square Drive Torque Wrench, Brownells Shop Apron, Vise Jaws, Parts Boxes, Brownells Bench Mat, 10-1/2” Long, ” Square Drive Handle, Magna-Tip #81 Handle, Magna-Tip Stubby Handle, Snap Ring Pliers, Barrel Nut Alignment Gauge, 5.56mm (.223) Headspace Gauge, Brownells #250 Chamber Mirror, Cleaning Rod Small Arms w/Adapter, Combination Wrench, Brownells Roll Pin Punches, Carrier Key Bit Kit, Brownells Roll Pin Holders (Starter/Setter Punches), Bolt Catch Pin Punch, Starrett 1/8” Punch, Taper Pin Starter, Starrett ” Punch, Starrett 5/32” Center Punch, Pivot Pin Detent Depressor, Pivot Pin Detent Installation Tool, Brownells Broken Shell Extractor, 445-6 Bit, Red Bit, LB Bit, Sight Tools, 3/8” Square Drive T-Handle Torque Wrench and Mil-Spec Tool Box. Additional Tools in Premium Kit: Accu-Grip Barrel Vise Jaws, Front Sight Bench Block, Upper Receiver Action Block, Lower Receiver Vise Block, Handguard Removal Tool, Magazine Catch Installation & Removal Tool, Takedown Pin Removal Tool, Bolt Ejector Tool, Magazine Feed Lip Tool, Gas Tube Wrench, Bolt Carrier Carbon Scraper and Buttstock Tool.

Click Here to Buy Now

Kns Precision, Inc. Ar-15 Quick Release Sling Swivels

(4.0)


Buy Kns Precision, Inc. Ar-15 Quick Release Sling Swivels

The Kns Precision, Inc. Ar-15 Quick Release Sling Swivels is only $14.95 at Brownells these days, which seems to be a pretty good price.

Parkerized finish provides correct appearance; QD swivel studs have cross drilled mounting holes for vertical or side carry. Front swivel stud attaches to free float or A-2-style detachable handguards. Requires drilling a single mounting hole in free float tubes. Rear QD sling stud replaces fixed military-type without modification to stock. Uncle Mike’s Quick Detachable Sling Swivels have a parkerized finish, accept 1-1/4″ slings. SPECS: Steel, parkerized, dark gray finish.

Click Here to Buy Now

Blade-Tech Ar-15/M16 Magazine Pouch W/3″ Belt Loop

(4.0)


Buy Blade-Tech Ar-15/M16 Magazine Pouch W/3

Brownells has a pretty good price on the Blade-Tech Ar-15/M16 Magazine Pouch W/3″ Belt Loop, for only $24.95.

Tough, injection molded Kydex magazine pouches allow you to carry extra magazines for fast reloads in tactical and competitive situations. Rigid, specially formed pouch bodies are molded to the shape of AR-15 and M-16 magazines to hold them firmly in place without crushing or denting. Adjustable tension screws eliminate the need for awkward flaps and hold magazines securely without rattling or falling out. Ambidextrous so you can put magazines in from either way depending on your preference. Low-profile single magazine pouch fits snugly and adjusts to fit from 1 ” to 3″ belts. Two adjustment screws allow you to modify the amount of tension holding the magazine in place. Also adjusts to fit your most comfortable angle of carry. SPECS: Injection molded polymer, black matte finish.

Click Here to Buy Now

Links