Archive

Archive for March, 2010

Yankee Hill Machine Co., Inc. Ar-15 Customizable Free-Float Tube

(4.5)


Buy Yankee Hill Machine Co., Inc. Ar-15 Customizable Free-Float Tube

The Yankee Hill Machine Co., Inc. Ar-15 Customizable Free-Float Tube is only $128.99 at Brownells these days, which seems to be a pretty good price.

Versatile forearm system lets you choose exactly how much rail space you need to accommodate add-on, tactical accessories. Lightweight, aluminum, tube free-floats the barrel to eliminate shifts in bullet point-of-impact caused by sling or bipod tension on the handguard. Four, evenly spaced rows of threaded mounting holes accept Yankee Hill’s Pictainny-type, modular, Add-On Rails. One full-length rail and one 3″ elevated rail included; additional rails available separately. Front end is internally threaded to accept the ported, Yankee Hill End Cap. Included barrel nut features a slotted lock ring to allow proper indexing of added accessory rails. Lock ring is best tightened using the Yankee Hill Forearm Wrench. Choose from Carbine, Specter, or Rifle length tubes. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Includes tube, full-length rail, 3″ elevated rail, jam nut, and barrel nut. Carbine – 7-3⁄16″ (18.3cm) long x 2” (5.1cm) dia. 9.5 oz. (269 g) wt. Accepts up to four 3”, 4” or 7” rails. Specter – 9-5⁄8″ (24.4cm) long x 2” dia. 12 oz. (340g). Covers gas block on a carbine-length gas system; low-profile gas block required. Accepts four 6”, 7”, or 9 ” rails or a combination of eight 3” and 4” rails. Rifle – 12 ” (31.8cm) long x 2” dia. 14.6 oz. (414 g) wt. Accepts up to four 7”, 9 ” or 12” rails; eight 3” and 4” rails; four 6” rails and four 3” or 4” rails; four 7” rails and four 3”or 4” rails.

Click Here to Buy Now

Strac Technologies Ar-15/M16 F.A.S.T. System Magazine Carrier

(4.5)


Buy Strac Technologies Ar-15/M16 F.A.S.T. System Magazine Carrier

The Strac Technologies Ar-15/M16 F.A.S.T. System Magazine Carrier can be found at Brownells for $339.99, which is a pretty good price.

Chest-mounted magazine dispenser holds three, spare, 30-round USGI magazines ready for lightning-fast mag changes without taking your eyes off the target. Drop the spent mag from the weapon, retrieve a fresh one from the F.A.S.T. (Fast And Smooth Transition) pack, and seat it in the mag well, ready to fire, in as little as two seconds. When the operator pulls the first spare magazine from the carrier, a powerful spring-loaded mechanism snaps the next one into place, ready to grab for the next reload. The fresh mag is always in the exact same position, so there’s no fumbling for a different pocket each time. With brief training, the operator quickly develops muscle memory and instinctively reaches to the correct spot for the next mag without looking down. Fully ambidextrous design mounts on either side of chest for strong- or weak-hand access by left- and right-handed shooters. Shell is made from exceptionally strong ,yet lightweight, high-impact polymer composite, and comes with a durable, fitted, 1000 Denier nylon case fully compatible with load-bearing vests using MOLLE attachment systems. Case has removable dust cover secured via a hook-and-loop attachment system, plus MOLLE loops on the front to allow attachment of additional pouches or accessories. SPECS: Molded hard polymer, black; steel spring. Carrying Case 1000 Denier nylon, black or O.D. green. Requires mil-spec USGI-dimension 30-round magazines without extended floorplates or external accessories.

Click Here to Buy Now

Superior Shooting Ar-15 Magazine Spring

(4.0)


Buy Superior Shooting Ar-15 Magazine Spring

The Superior Shooting Ar-15 Magazine Spring is only $11.25 at Brownells these days, which seems to be a pretty good price.

Provides positive pre-load against the follower with extra power Plus consistent tension and less drag against the magazine side walls. Angled correctly to locate the follower in its optimum position. Made of chrome silicon steel to last well beyond the lifetime of the magazine. Faster, more positive bolt stop engagement to save wear on the part. Available for 30 & 40 round magazines. SPECS: Chrome silicon steel.

Click Here to Buy Now

Tangodown Ar-15 Rail Covers

(5.0)


Buy Tangodown Ar-15 Rail Covers

Brownells has a great price on the Tangodown Ar-15 Rail Covers, at only $12.99.

This SCAR Panel set was designed based on feedback from Special Forces. It features a slim design with an improved binary texture for added grip purchase. The locking tab fits easily to MIL-STD 1913 rails, while the panels are crafted from high strength, heat and impact resistant polymer, which also offers protection against barrel heat. Each set includes two panels.

Click Here to Buy Now

Double Star Ar-15/M16 Rubber Recoil Pad

(5.0)


Buy Double Star Ar-15/M16 Rubber Recoil Pad

Brownells has a great price on the Double Star Ar-15/M16 Rubber Recoil Pad, at only $12.

Soft, rubber buttpad reduces felt recoil on all ARs fitted with the Ace ARFX stock. Contoured to fit your shoulder, provides a non-slip fit that improves comfort and control. Available in two models, ” and 1″ thick. SPECS: Rubber, black. Aluminum backing plate. 4-5⁄8″ (11.8cm) long, 1-1⁄8″ (2.8cm) wide. Available in ” (1.3cm) and 1″ (2.5cm) thicknesses. Includes mounting screws.

Click Here to Buy Now

Yankee Hill Machine Co., Inc. Ar-15 4-Rail Free-Float Handguard

(4.5)


Buy Yankee Hill Machine Co., Inc. Ar-15 4-Rail Free-Float Handguard

The Yankee Hill Machine Co., Inc. Ar-15 4-Rail Free-Float Handguard can be found at Brownells for $119.99, which is a pretty good price.

Four, integral, full-length Picatinny rails machined into a single piece of high-strength, rigid aluminum forms a handguard that delivers maximum stability and reliability. Stress-free tube design ensures complete free-float of the barrel for optimal accuracy. Barrel nut locks in place with two anti-rotation screws to ensure handguard remains locked in place, even under the added torque from vertical grips. Four, threaded, swivel stud mounting holes allow attachment of Yankee Hill threaded swivel stud at the top, bottom, or either side of the handguard. Available in Carbine or Rifle lengths. Heavy duty, Standard model features narrow cooling vents that run lengthwise along the handguard. Lightweight model is a skeletonized version specifically machined to reduce weight from the rails; oversized cooling holes provide maximum ventilation and allow clear view of the barrel for the ultimate tactical look. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Carbine Models 7-3⁄16″ (18.3 cm) long x 2-3⁄8″ (6 cm) wide. Rifle Models 12 ” (31.8cm) long x 2-3⁄8″ wide. Weight: Standard Carbine – 14.3 oz. (405 g). Standard Rifle – 22.5 oz. (638 g). Lightweight Carbine – 10.6 oz. (300 g). Lightweight Rifle – 14.75 oz. (418 g).

Click Here to Buy Now

Evolution, Inc. Ar-15 Match Barrel

(4.0)


Buy Evolution, Inc. Ar-15 Match Barrel

The Evolution, Inc. Ar-15 Match Barrel can be found at Brownells for $449.99, which is a pretty good price.

Button rifled and fully machined to very tight tolerances for unmatched accuracy. Designed for match rifles with free-float tubes and flat top receivers. Integral muzzle brake greatly diminishes recoil and muzzle flip. Sleek, contoured gas block will not obstruct view with low-mounted scopes or red dot optics. Legal for installation on both pre- and post-ban receivers. SPECS: 410 stainless steel, bright-machined finish. Chambered .223 Rem. 1-9″ twist, nominal 16″ (40cm) or 20″ (50cm) long, .951″ (24mm) dia. under the handguard. Compensator adds 11/4″ (3.1cm) to overall length. Includes gas block and barrel extension.

Click Here to Buy Now

Rock River Arms Rock River Arms Ar-15 Upper & Lower Receiver Set

(4.0)


Buy Rock River Arms Rock River Arms Ar-15 Upper & Lower Receiver Set

We found a great deal on the Rock River Arms Rock River Arms Ar-15 Upper & Lower Receiver Set for only $380 at Brownells.

Forged, upper and lower receivers are CNC machined to tighter than mil-spec tolerances, with critical contact points held to +/- .0005″. Hand selected and matched to ensure a tight, movement-free, lockup between the upper and lower halves. Accepts all aftermarket and mil-spec internal parts. NM A2 has carry handle machined to accept A2 rear sight. NM A4 is flattop style with multiple cross-slot, Weaver-style base for mounting optical and match sights. FFL required for purchase. SPECS: 7075-T6 aluminium, black, hardcoat anodized, matte finish. Small pin, hammer/trigger and pivot/takedown holes. .154″ (3.9mm) diameter hammer/trigger pin holes. .250″ (6.3mm) diameter pivot/takedown pin holes.

Click Here to Buy Now

Brownells Tool Kits For Ar-15/M16/M4

(4.5)


Buy Brownells Tool Kits For Ar-15/M16/M4

Brownells has a pretty good price on the Brownells Tool Kits For Ar-15/M16/M4, for only $109.5.

The RIGHT way to repair and service the AR-15/M16/M4! These kits contain the tools the gunsmith or armorer needs to perform full maintenance and repairs of these rifles in the field or shop. Each tool is designed to do its job in the simplest, most effective manner to maintain and repair these guns correctly – and save time doing it. Standard Kit contains the tools needed to work on the AR-15 and the M16A1 through A4. Premium Kit contains all the tools of the Standard Kit, plus an additional 11 items necessary to repair and maintain the M4 carbine as well. Both kits come in a custom-fitted, hard-side tool box that’s made from nearly indestructible molded polymer resin and meets mil-spec MIL-C-4150 and ATA specifications. The Standard kit’s foam inserts are pre-cut with spaces for the M4 tools, so you can turn it into a Premium Kit anytime simply by adding the Upgrade Kit. SPECS: Standard Armorer’s Kit includes: 12 Ounce Ballpeen Hammer, ” Plastic/Brass Hammer, Firing Pin Protrusion Gauge, ” Square Drive Torque Wrench, Brownells Shop Apron, Vise Jaws, Parts Boxes, Brownells Bench Mat, 10-1/2” Long, ” Square Drive Handle, Magna-Tip #81 Handle, Magna-Tip Stubby Handle, Snap Ring Pliers, Barrel Nut Alignment Gauge, 5.56mm (.223) Headspace Gauge, Brownells #250 Chamber Mirror, Cleaning Rod Small Arms w/Adapter, Combination Wrench, Brownells Roll Pin Punches, Carrier Key Bit Kit, Brownells Roll Pin Holders (Starter/Setter Punches), Bolt Catch Pin Punch, Starrett 1/8” Punch, Taper Pin Starter, Starrett ” Punch, Starrett 5/32” Center Punch, Pivot Pin Detent Depressor, Pivot Pin Detent Installation Tool, Brownells Broken Shell Extractor, 445-6 Bit, Red Bit, LB Bit, Sight Tools, 3/8” Square Drive T-Handle Torque Wrench and Mil-Spec Tool Box. Additional Tools in Premium Kit: Accu-Grip Barrel Vise Jaws, Front Sight Bench Block, Upper Receiver Action Block, Lower Receiver Vise Block, Handguard Removal Tool, Magazine Catch Installation & Removal Tool, Takedown Pin Removal Tool, Bolt Ejector Tool, Magazine Feed Lip Tool, Gas Tube Wrench, Bolt Carrier Carbon Scraper and Buttstock Tool.

Click Here to Buy Now

Brownells Ar-15/M16/Ar-Style .308 M-Pro 7 Ar-15 Cleaning Kit

(4.5)


Buy Brownells Ar-15/M16/Ar-Style .308 M-Pro 7 Ar-15 Cleaning Kit

Brownells has a great price on the Brownells Ar-15/M16/Ar-Style .308 M-Pro 7 Ar-15 Cleaning Kit, at only $34.99.

Brownells has teamed up with M-Pro 7 to develop this cleaning kit specifically for maintaining an AR-type rifle in peak operating condition. Now you can clean your AR using the same operationally tested products used by the United States Armed Forces. Inside the kit’s compact hardshell case you’ll find M-Pro 7 Gun Cleaner that safely penetrates deep beneath even tough, scorched-on carbon fouling to lift away the gunk and leave the bore sparkling clean. M-Pro 7 Cleaner/Lubricant/Protectant delivers superior lubrication and corrosion protection, and can also be used for quick cleaning on the go, when there isn’t enough time for the complete cleaning routine. You get a military-style multi-section steel cleaning rod with a folding handle, plus five high-quality bronze brushes to clean ARs in the standard .223/5.56mm and .308/7.62mm calibers, as well as 9mm and .45 chamberings, plus a brush for cleaning the bolt carrier way-critical for maintaining reliable weapon cycling. There’s plenty of absorbent cotton flannel patches in three sizes to fit all those calibers, plus the M-Pro 7 Weapons Maintenance Guide. Due to its non-hazardous and non-flammable contents, this kit meets TSA regulations for legal transport in checked baggage aboard commercial airliners. SPECS: Kit contains polycarbonate box, black; 2 fl. oz (59ml) Gun Cleaner; 2 fl oz. Cleaner/Lubricant/Protectant; five-section steel cleaning rod w/30” maximum extended length; (4) bronze bore brushes to fit .22/.223/5.56mm, .308/7.62mm, 9mm, and .45; bronze bolt way cleaning brush; polymer patch loop; 1” circular, 2” square, and 2 ” square cotton flannel patches; lint-free gun cloth; and Weapons Maintenance Guide.

Click Here to Buy Now

Links