Archive

Archive for February, 2010

Smith Enterprise Ar-15/M16 6.8Mm/.30 Cal. Vortex Flash Eliminator

(4.0)


Buy Smith Enterprise Ar-15/M16 6.8Mm/.30 Cal. Vortex Flash Eliminator

The Smith Enterprise Ar-15/M16 6.8Mm/.30 Cal. Vortex Flash Eliminator can be found at Brownells for $57.99, which is a pretty good price.

Provides the Vortex system’s superior flash hiding benefits for 6.8mm/7.62mm/.30 caliber AR-15-type rifles and carbines. Clean, streamlined design with rounded edges minimizes snagging; skirt extension conceals gap between barrel shoulder and flash eliminator. Thread-on design requires no washer. Models available to fit rifles with “-28 tpi and 9/16″-24 tpi threaded muzzles. Check out the video demonstration of the Smith Enterprise Flash Hiders. SPECS: 8620 steel, Parkerized matte black finish. 2 ” (5.7cm) long, .859″ (22mm) O.D. 2.9 oz. (81 g weight). Fits AR-15/M16/M4 type rifles.

Click Here to Buy Now

Brownells Ar-15/M16 Magazine W/Cs Spring

(4.0)


Buy Brownells Ar-15/M16 Magazine W/Cs Spring

Brownells has a pretty good price on the Brownells Ar-15/M16 Magazine W/Cs Spring, for only $99.99.

Load a smooth-feeding Brownells 30-round AR-15/M16 magazine to maximum capacity and fire all the rounds–no jams, no misfeeds, no hangups. All components are manufactured under strict ISO quality control standards from top-quality mil-spec materials. The heat-treated, welded aluminum body is hard-anodized for superior corrosion resistance, then given a tough, dry-lube coating to eliminate the need for additional lubricants that attract dust, sand, or dirt. The latest military-type glass-fiber reinforced composite follower further guarantees flawless feeding in the harshest operating conditions. The high-lubricity, dry-lube coated chrome silicon spring is corrosion-resistance certified to 500-hour salt spray standards, and resists taking a “set” when a fully loaded mag is stored for a long time. The same updated material and design features have been adapted to our straight-bodied, 20-round model. With our combo-pak deal, it’s easy to make sure you have plenty both sizes on hand–and still have some money left over for ammo! SPECS: Aluminum body, hard-anodized, dry-lube coating. Fiberglass-filled plastic follower. Gray with dry-lube-coated chrome silicon (CS) spring.

Click Here to Buy Now

Brownells Ar-15/M16 Combination Wrench

(4.0)


Buy Brownells Ar-15/M16 Combination Wrench

The Brownells Ar-15/M16 Combination Wrench can be found at Brownells for $34.99, which is a pretty good price.

An exact duplicate of the original factory/military design so you know it will fit and work. Use for several jobs: to remove the barrel nut; to remove and install old and new flash suppressors; to remove and install the lower receiver extension. Check out the video demonstration of the Brownells AR-15/M16 Combination Wrench. SPECS: Blued steel. 5″ (12.7cm) long x 2″ (5cm) wide x 1/4″ (6.35mm) thick.

Click Here to Buy Now

Troy Industries, Inc. Ar-15/M16 Folding Battle Sights

(5.0)


Buy Troy Industries, Inc. Ar-15/M16 Folding Battle Sights

Brownells has a great price on the Troy Industries, Inc. Ar-15/M16 Folding Battle Sights, at only $129.99.

Rugged, flip-up sights provide failsafe backup when your primary optic or red dot sight fails. Sight post flips up easily when you need it and locks securely in place under powerful spring pressure and two locking detent balls, so it can’t be accidentally bumped down until you hit the spring-loaded button on the left side of the base to retract it. Positions apertures at the same height as factory sights, simplifying integration of these sights on your rifle. Base with sturdy side clamp and heavy duty stainless steel crossbolt attaches to any military or commercial Picatinny rail. Installs with a standard flathead screwdriver—no protruding knobs or levers to catch on brush, clothing, or other equipment. Machined from 6061 T6 aluminum and Type III hardcoat anodized for durability with Teflon additive to resist surface abrasion; available in Black and Dark Earth. Front sight clamps to handguard accessory rail and is only ” high when folded. Available in HK and M4 styles, both with M4-type sight post that is elevation adjustable in MOA increments. Protective ears on both models shield the post from damage. Distinctive “globe” shape of HK sight aids in fast target acquisition under stress. Deep grooves in sides of M4/M16 sight post ensure a firm grasp for fast deployment. HK-Style Rear Sight bolts to flattop receiver rail and is only .460″ high when folded. Flip between two same-plane apertures; large .190″ aperture provides a wide field of view for close-in targets, while .070″ aperture is calibrated for engaging long-range targets. Sturdy, protective “ears” guard the aperture from impact. Large adjustment wheel with deep serrations lets you change the windage setting in MOA increments; positive-locking detent ensures settings change only when you want them to. SPECS: Stainless steel and aluminum, Black or Dark Earth finish. Rear – 1.17” (3cm) long, 1.25” (3.2cm) wide, 1.85” (4.7cm) high extended. 1.8 oz. (52g) wt. HK Front – 1.17” long, 1.25” wide, 1.9” (4.9cm) high extended. 1.6 oz. (45g) weight. M4/M16 Front – 1.17” long, 1.25” wide, 1.75” (4.5cm) high extended. 1.6 oz. weight.

Click Here to Buy Now

Midwest Industries, Inc. Ar-15/M16 Front Sling Adapters

(4.0)


Buy Midwest Industries, Inc. Ar-15/M16 Front Sling Adapters

The Midwest Industries, Inc. Ar-15/M16 Front Sling Adapters is only $33.99 at Brownells these days, which seems to be a pretty good price.

Two-piece clamp with single cross-bolt secures adapter to Picatinny/Weaver-style handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1 ” wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 11⁄4″ wide, 360 rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1 ” wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08HDO has same features as MCTAR-08HD, but is offset from centerline for unobstructed use of weapon light, laser, vertical grip, or other tactical accessories. MCTAR-TS has a fixed, round, 5⁄16″ (7.8mm) ID loop for clip-on, H&K-style or similar quick-release slings. SPECS: Bases – 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD – 7⁄8″ (2.2cm) long x 13⁄16″ (3cm) wide. MCTAR-08HDO – 2″ (5cm) long x 1″ (2.5cm) wide. Other models – 9⁄16″ (1.4cm) long x 13⁄16″ (3cm) wide. Swivels/Studs – Steel, black finish. Swivels accept slings up to 11⁄4″ (3.2cm) wide.

Click Here to Buy Now

Sabre Defence Industries, Llc. Ar-15/M16 M4 Carbine Barrel

(4.0)


Buy Sabre Defence Industries, Llc. Ar-15/M16 M4 Carbine Barrel

Brownells has a pretty good price on the Sabre Defence Industries, Llc. Ar-15/M16 M4 Carbine Barrel, for only $399.99.

Premium-quality, M4-contour, 16″ barrel is machined from ordnance-grade chrome-moly-vanadium steel alloy to give you outstanding accuracy, exceptional wear resistance, and maximum service life. Sabre manufactures these barrels to the same uncompromising standards they bring to the .50 caliber M2 machine gun and 7.62mm mini-gun barrels they make for the United States military. Each barrel is heat treated to relieve internal stresses in the alloy’s grain structure that can lead to accuracy-robbing heat distortion during sustained fire. Chambered for 5.56mm NATO, with a 1-9″ twist. Includes A2 flash hider, gas block with A2 front sight, bayonet lug, and sling swivel. Chrome-lined for maximum bore life. SPECS: Chrome-moly-vanadium steel alloy, Parkerized, matte black finish. 16″ (40.6cm) long. 1-9″ twist. Chambered for 5.56mm NATO (.223).

Click Here to Buy Now

Superior Shooting Ar-15/Car-15 Extractor/Ejector Spring Set

(4.0)


Buy Superior Shooting Ar-15/Car-15 Extractor/Ejector Spring Set

The Superior Shooting Ar-15/Car-15 Extractor/Ejector Spring Set can be found at Brownells for $12.95, which is a pretty good price.

Replacement, drop-in fit chrome silicon extractor and ejector springs from David Tubb provide long term durability and up to 80% more power than factory springs in AR-15 rifles. Precision manufacturing and high quality steel give extremely consistent compression cycle for smooth operation over thousands of rounds. SPECS: Chrome silicon steel.

Click Here to Buy Now

Magpul Ar-15/M16 Moe Grip

(4.5)


Buy Magpul Ar-15/M16 Moe Grip

Brownells has a great price on the Magpul Ar-15/M16 Moe Grip, at only $20.99.

Magpul Original Equipment (MOE) grip is a durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing. Compatible with Magpul MIAD Grip Cores and Enhanced Aluminum Triggerguard, available separately.Check out the 360 Image of the Magpul AR-15/M16 MOE™ Grip in Black.Check out the 360 Image of the Magpul AR-15/M16 MOE™ Grip in Dark Earth. SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, or Foliage Green.

Click Here to Buy Now

J P Enterprises Ar-15/Ar-Style .308 Adjustable Trigger System

(4.0)


Buy J P Enterprises Ar-15/Ar-Style .308 Adjustable Trigger System

We found a great deal on the J P Enterprises Ar-15/Ar-Style .308 Adjustable Trigger System for only $182.99 at Brownells.

Easy-to-fit replacement for factory trigger is fully adjustable for engagement and overtravel, and is available with pull weight as light as 3.5 lbs. Redesigned sear geometry and advanced metallurgy result in a precision-ground sear edge that delivers a precise, consistent letoff and prevents the kind of wear that causes doubling and other problems. Extremely short reset enables fast follow-up shots, a critical advantage on tactical and competition rifles. Machined to exceptionally tight tolerances from hardened steel, and installs in minutes with no permanent alterations to the rifle. Models to fit small (.154″) and large (.169″) pin receivers. Standard pull weight is between 3 and 3.5 lbs.-perfect for competition and recreational shooting. Tactical pull weight is between 3.5 and 4 lbs. for applications demanding a high level of ignition reliability, including police/military use, mil-spec ammunition with hard primers, and in AR-style .308 rifles. Adjustable Trigger Kit lets you install J.P. trigger components while keeping your factory or aftermarket hammer and pins. Disconnector spring, engagement screw, and overtravel screw are already installed; also includes disconnector, trigger return spring, hammer spring, and .050″ hex key. Use with J.P. Enterprises Speed Hammer for best performance. Fire Control Package contains contents of the Kit, plus low-mass J.P. Speed Hammer for faster lock time and two anti-walk pins with button head cap screws for easy removal and reinstallation of trigger system when making adjustments. SPECS: Steel, parkerized finish. Models for rifles with either .154″ (military and current aftermarket) or .169″ (current Colt) diameter trigger pins. Measure your pins and select the correct kit. Includes complete instructions and a CD-ROM with 35-minute video showing step-by-step installation.

Click Here to Buy Now

Accuracy Speaks Ar-15 Adjustable Butt Plate

(4.5)


Buy Accuracy Speaks Ar-15 Adjustable Butt Plate

Brownells has a pretty good price on the Accuracy Speaks Ar-15 Adjustable Butt Plate, for only $146.28.

No-gunsmithing! Add increased shooting comfort to any AR-15 equipped with an A1 trap door butt plate. After mounting, loosen the two set screws to make fast adjustments in length of pull, drop at heel, height at comb and angle of stock. Replaces the A-1 trap door butt plate and includes a serrated-face, rubber recoil pad. SPECS: Alum. plates, black-anodized finish. 5″ (12cm) long, 1-5/8″ (4.1cm) wide. 12 oz. (351 kg).

Click Here to Buy Now

Links