Archive

Archive for November, 2009

Double Star Ar-15/M16 Service Rifle Barrels

(4.5)


Buy Double Star Ar-15/M16 Service Rifle Barrels

We found a great deal on the Double Star Ar-15/M16 Service Rifle Barrels for only $220.99 at Brownells.

Ready-to-install barrels let you customize your AR-15/M16/M4/CAR-15 or replace a “shot-out” factory barrel with one that preserves your gun’s original specs and appearance. Machined from 4140 steel, with a dark gray, military-type Parkerized finish. Button-cut, six groove rifling with 1:9 right-hand twist provides superb accuracy with most bullet weights. Barrel nut and handguard retainer cap included. Forged front sight housing has integral bayonet lug, and muzzle is threaded to accept the flash hider or compensator of your choice. Choose from Chrome Lined for maximum bore life or Standard (unlined) for an extra edge in accuracy. A1 has the correct dimensions and contours of the original M16A1 barrel. Offers a substantial weight reduction (10 oz. in 16″ configuration) for carrying ease and faster deployment in combat, with accuracy equal to the heavier HBAR barrel out to 100 meters. Front sight housing is specifically manufactured to fit the .625″ forward barrel, not a modified .750″ housing, to maintain correct appearance. 11 ” model provides an even lighter, more compact and maneuverable package; all NFA rules apply. SPECS: 4140 steel, dark gray Parkerized finish. A1 – .675″ (1.71cm) OD under handguard, .625″ (1.59cm) at front sight housing, .600″ (1.52cm) at muzzle. HBAR – .870″ ( 2.21cm) OD under handguard, .750″ (1.91cm) at front sight housing, .730″ (1.85cm) at muzzle.

Click Here to Buy Now

Geissele Automatics Llc Ar-15/M16/Ar-Style .308 Hi-Speed Triggers

(4.5)


Buy Geissele Automatics Llc Ar-15/M16/Ar-Style .308 Hi-Speed Triggers

We found a great deal on the Geissele Automatics Llc Ar-15/M16/Ar-Style .308 Hi-Speed Triggers for only $279.99 at Brownells.

Fully adjustable trigger gives a smooth, two-stage pull with a precise “icicle sharp” break and ultra-fast lock time to minimize accuracy loss caused by gun movement during trigger pull. Set first stage pull weight by bending the legs of the trigger spring; set second-stage weight within a pre-set range by turning its adjustment screw. Another screw on the trigger lets you adjust overtravel for clean, crisp letoff. Lightweight hammer provides a 50% reduction in lock time over factory hammer, yet uses standard weight hammer spring to ensure sufficient energy transfer for reliable primer ignition, even on AR-style .308 weapons. Trigger shoe is positioned 1/8″ farther forward than factory shoe for comfortable finger position during the squeeze. All contact surfaces are wire EDM cut to exact dimensions for full, precise engagement free of unwanted play. Available to fit both large (.169″) and small (.154″) pin receivers; small pin models include spare hammer pin to aid in proper fit on receivers with slightly oversized holes. Service model provides nominal 4 lb. pull weight required for NRA High Power Service Rifle competition and is also approved for CMP-sanctioned competitions. Most of the pull weight is loaded on the first stage, followed by a quick, clean second-stage break. First stage, 3.2 to 5 lb.; second stage, to 1 lb. Match model allows a very low combined pull weight for superb trigger control on highly modified raceguns used in unlimited NRA High Power Rifle competition. Helps you shave those extra hundredths of an inch from your groups for a competitive edge. First stage, 1.3 to 3 lbs.; second stage, 4 oz. to 14 oz. Designated Marksman Rifle (DMR) model combines the light first stage of the Match trigger with the heavier Service second stage to reduce risk of premature release in high stress situations. Perfect for precision tactical and competitive shooting where trigger pull is not regulated. Allows a high rate of semi-auto fire; an experienced shooter can fire 30 rounds in as little as 4 seconds. First stage, 1.3 to 3 lbs.; second stage, to 1 lbs. SPECS: Steel, black finish. Available for receivers with .154″ (military, current aftermarket, older Colt) and .169″ (current Colt without sear block) hammer and trigger pins. Kit includes trigger and hammer assemblies, plus oversized hammer pin, compact pin punch, three hex wrenches, tube of GA No. 1 grease, bottle of GA No. 2 oil, and complete illustrated instructions.

Click Here to Buy Now

Dpms Ar-15/M16 Free Float Tube

(4.5)


Buy Dpms Ar-15/M16 Free Float Tube

Brownells has a pretty good price on the Dpms Ar-15/M16 Free Float Tube, for only $49.99.

Lightweight, two-piece aluminum handguard eliminates exterior pressure points on AR-15/M16 barrels to help increase accuracy. Exta rigid design is made from extruded aluminum. Separate barrel nut and forend tube thread together; easy to install and torque to proper specifications. Completely replaces the plastic, factoy handguard, barrel nut and front cap for less weight and better heat dissipation. SPECS: Extruded aluminum, black-anodized finish. 2″ (5cm) dia- meter. Standard; 12-3/8″ (31.4cm) long. Carbine; 7 ” (18.4cm) long. Fits AR-15, M16 rifles or CAR-15 carbines. Both models accept barrels up to 1″ (2.5cm) in diameter. Check distance from front of receiver to rear of front sight bridge.

Click Here to Buy Now

Brownells Ar-15/M16 Flash Suppressor Tap & Die

(4.5)


Buy Brownells Ar-15/M16 Flash Suppressor Tap & Die

We found a great deal on the Brownells Ar-15/M16 Flash Suppressor Tap & Die for only $29.99 at Brownells.

A must when threading custom barrels or chasing threads on standard barrels. Use to make custom supressors or clean up existing factory threads. Custom-made to factory specs. SPECS: High-speed steel. AR-15/M16 – .500″-28 thread, 1 ” dia. body. AR-10 – 5/8″-24 thread.

Click Here to Buy Now

Vltor Weapon Systems Ar-15/M-16/M-4 Modstock Basic Carbine Combo Kit

(4.0)


Buy Vltor Weapon Systems Ar-15/M-16/M-4 Modstock Basic Carbine Combo Kit

Brownells has a pretty good price on the Vltor Weapon Systems Ar-15/M-16/M-4 Modstock Basic Carbine Combo Kit, for only $159.99.

Rugged, tactical stock system contains all the parts you need to replace your AR-15/M16 or existing collapsible stock with an advanced, five-position, carbine stock. Unique, clubfoot design provides better overall control and a firm, tight grip in all combat situations. Three sling loops are molded directly into the stock and are wide enough for use with military-style, nylon web slings. One sling locking sleeve is also built-in to accept a quick-detach, push-button sling swivel. Two battery compartments with waterproof caps hold up to four, spare, 3-volt lithium batteries. Kit includes Clubfoot Modstock, buffer, buffer spring, endplate, locking nut, and two, long accessory storage compartments with caps. SPECS: Molded polymer, black. 11″ (27.9cm) to 14 ” (36.8cm) l.o.p.

Click Here to Buy Now

Blue Force Gear Car-15/M4 Combat Applications Sling

(4.5)


Buy Blue Force Gear Car-15/M4 Combat Applications Sling

The Blue Force Gear Car-15/M4 Combat Applications Sling is only $64.95 at Brownells these days, which seems to be a pretty good price.

Two-point design with front quick adjustment strap lets the operator change sling length without creating loose ends that can tangle with other gear. Allows for a variety of carry and shooting positions based on required tactical response. Fits M4 carbines with side sling swivels with 1 ” wide loop. Vickers is composed of two, separate sections of Cordura nylon webbing; 17″ forearm end, including quick adjustment loop, and 30″ rear buttstock end; joined together with a high strength steel channel. Separate 10″ removable, modular quick-release on the buttstock end allows for fast exit from sling and weapon in emergency situations. Can be used with or without modular release feature. Features machined aluminum front buckle, steel mid-section connector and polymer buckles. Vickers Padded and Vickers Padded Carbine are the same basic design as the Vickers with the addition of an extra wide shoulder strap with foam core padding for comfortable, all day carry without pinching or binding. Modular quick release not included. Composed of two, separate sections of Cordura nylon webbing; forearm end, including quick adjustment loop, and rear buttstock end with shoulder pad. Carbine model is slightly longer. Victory is composed of two, separate sections of filament nylon webbing; 16″ forearm end, including quick adjustment loop, and 28″ rear buttstock end; joined together with a high strength steel channel. Modular quick-release not included. Advanced polymer non-slip adjustment buckles are resistant to solvents. SPECS: Black, coyote, or O.D. green depending on model. Vickers/Vickers Padded – Cordura nylon web. Aluminum front buckle, with steel mid-section connector, other buckles are polymer. 1 ” (3.1cm) wide. Adjusts from 46″ (117cm) to 55″ (140cm) OAL. Vickers Padded Carbine – Cordura nylon web. Adjusts from 50″ (127cm) to 74″ (188cm) OAL. Victory – Filament nylon web. Steel mid-section connector with polymer buckles. 1 ” (3.1cm) wide. Adjusts from 34″ (86cm) to 44″ (112cm) OAL.

Click Here to Buy Now

Magpul Ar-15/M16 Ubr Buttstock

(4.5)


Buy Magpul Ar-15/M16 Ubr Buttstock

Brownells has a great price on the Magpul Ar-15/M16 Ubr Buttstock, at only $264.99.

Rugged, adjustable carbine buttstock combines the solidness of a fixed stock with a unique set of convenience and comfort features to provide a highly versatile, stable shooting platform. The Utility/Battle Rifle (UBR) stock’s tough, reinforced polymer construction stands up to the pounding of the new large-bore chamberings found in AR-style rifles. It can handle high-tempo tactical operations, while providing an extremely secure cheekweld in almost any position. Compact, streamlined design has minimal protrusions to snag on foliage, clothing, sling, or other gear. Provides seven length-of-pull positions, with a proprietary preset system that lets you pull the release lever and instantly snap the stock open to the position that’s right for you. Set your preferred preset position simply by moving a machine screw. Depress the Preset button and pull the release lever again to open the stock the rest of the way; then hit the Remove button, pull the release, and slide the stock completely off the UBR main tube. Comes with interchangeable narrow and ACR-style wide cheekpieces that can be installed in three positions to move the cheekweld point forward or back as needed. Includes a slot at the toe for a 1 ” sling, plus front and rear QD pushbutton sling receptacles that may be positioned on either side of the stock. Storage compartment for spare batteries, cleaning supplies, or other small items has a positive-locking door that may be positioned on either side. Or remove the compartment entirely to give the UBR a skeletonized look. Removable buttpad of synthetic rubber over hard-polymer core gives a comfortable, non-slip shoulder fit without impeding maneuverability. Kit includes Magpul’s machined aluminum “entry length” receiver extension that replaces your gun’s factory extension. If mounting on a rifle with A1/A2 fixed stock, you must also install an M4 carbine buffer and action spring (not included) for correct weapon function with UBR mounted. Instructions included. SPECS: Impact-resistant polymer and machined aluminum, Black, Dark Earth, O.D. Green, or Foliage Green. 8″ (20.3cm) OAL retracted. 11 ” (28.6cm) OAL fully extended. Approximately 5 ” (13.3cm) high. LOP adjustment range, 33⁄8″ (8.6cm).

Click Here to Buy Now

Gps, Llc. Ar-15/M16 Accessory Rails

(4.0)


Buy Gps, Llc. Ar-15/M16 Accessory Rails

We found a great deal on the Gps, Llc. Ar-15/M16 Accessory Rails for only $26.99 at Brownells.

Bolt-on, Picatinny-type rail increases the versatility and effectiveness of your Grip Pod by adding mounting space for tactical accessories directly below the handguard. Puts controls for lights and lasers in easy reach of your support hand for exceptionally fast activation in any situation. Made of the same tough, reinforced, high-density polymer as the Grip Pod itself, so it stands up to the rigors of tactical operations. No drilling or other permanent alterations required to install; simply remove a pin and plug from the front of the Grip Pod, insert the rail unit and lock it down by tightening the steel hex-head bolt with the included hex-wrench. Available in single, right-hand rail (GPRS1) and double rail (GPRS2) models. SPECS: Reinforced, injection-molded polymer, Black or Desert Tan. GPRS1 – 2 ” (5.4cm) length rail on right side of weapon. GPRS2 – 2 ” of rail space on each side.

Click Here to Buy Now

Grsc Car-15 Car Ambi Sling Adapter

(4.5)


Buy Grsc Car-15 Car Ambi Sling Adapter

The Grsc Car-15 Car Ambi Sling Adapter can be found at Brownells for $9.99, which is a pretty good price.

Steel, sling adapter replaces the standard issue, receiver plate to provide a rock solid attachment point for fast handling, tactical slings on CAR-15 rifles. Ambidextrous slots accept 1 ” wide webbing, rings accommodate carry straps with snap fasteners. Allows the sling to be switched from right or left side of receiver in seconds. Keeps sling tangle-free and provides the proper balance and stability for hands-free carry. SPECS: Steel, Parkerized finish. 2-9/16″ (6.5cm) long, 2-1/16″ (5.2cm) high, 3/32″ (2.4mm) thick. Fits CAR-15 rifles.

Click Here to Buy Now

Brownells Ar-15 Sight Wrench

(4.0)


Buy Brownells Ar-15 Sight Wrench

The Brownells Ar-15 Sight Wrench is only $15.99 at Brownells these days, which seems to be a pretty good price.

Precision machined from tough, stressproof steel with square-profile fingers that grip the sight notches firmly and won’t “roll out”; provides easy, exact sight adjustment. Plus, they resist bending and breaking to give years of service. Deeply drilled body fits both issue and tall blade sights. An extra-nice touch are the hex-shaped bodies; they’re easy to grasp, easy to turn and won’t roll off your bench. Three tools: A1 five-prong and A2 four-prong fit front and rear sights. A1/A2 is double ended to fit both five-detent A1 and four-detent, square blade, A2 front sights only. Check out the video demonstration of the AR-15 Sight Wrench. SPECS: Stressproof steel, blue finish. A1: five-prong and A2: four-prong (adjusts front and rear). 1-3/8″ (3.5cm) long x ” (19mm) dia. A1/A2: 2 ” (6.4cm) long four-prong/five-prong front only wrench.

Click Here to Buy Now

Links