Home > AR-15 Parts > Geissele Automatics Llc Ar-15/M16/Ar-Style .308 Hi-Speed Triggers

Geissele Automatics Llc Ar-15/M16/Ar-Style .308 Hi-Speed Triggers

Buy Geissele Automatics Llc Ar-15/M16/Ar-Style .308 Hi-Speed Triggers

We found a great deal on the Geissele Automatics Llc Ar-15/M16/Ar-Style .308 Hi-Speed Triggers for only $279.99 at Brownells.

Fully adjustable trigger gives a smooth, two-stage pull with a precise “icicle sharp” break and ultra-fast lock time to minimize accuracy loss caused by gun movement during trigger pull. Set first stage pull weight by bending the legs of the trigger spring; set second-stage weight within a pre-set range by turning its adjustment screw. Another screw on the trigger lets you adjust overtravel for clean, crisp letoff. Lightweight hammer provides a 50% reduction in lock time over factory hammer, yet uses standard weight hammer spring to ensure sufficient energy transfer for reliable primer ignition, even on AR-style .308 weapons. Trigger shoe is positioned 1/8″ farther forward than factory shoe for comfortable finger position during the squeeze. All contact surfaces are wire EDM cut to exact dimensions for full, precise engagement free of unwanted play. Available to fit both large (.169″) and small (.154″) pin receivers; small pin models include spare hammer pin to aid in proper fit on receivers with slightly oversized holes. Service model provides nominal 4 lb. pull weight required for NRA High Power Service Rifle competition and is also approved for CMP-sanctioned competitions. Most of the pull weight is loaded on the first stage, followed by a quick, clean second-stage break. First stage, 3.2 to 5 lb.; second stage, to 1 lb. Match model allows a very low combined pull weight for superb trigger control on highly modified raceguns used in unlimited NRA High Power Rifle competition. Helps you shave those extra hundredths of an inch from your groups for a competitive edge. First stage, 1.3 to 3 lbs.; second stage, 4 oz. to 14 oz. Designated Marksman Rifle (DMR) model combines the light first stage of the Match trigger with the heavier Service second stage to reduce risk of premature release in high stress situations. Perfect for precision tactical and competitive shooting where trigger pull is not regulated. Allows a high rate of semi-auto fire; an experienced shooter can fire 30 rounds in as little as 4 seconds. First stage, 1.3 to 3 lbs.; second stage, to 1 lbs. SPECS: Steel, black finish. Available for receivers with .154″ (military, current aftermarket, older Colt) and .169″ (current Colt without sear block) hammer and trigger pins. Kit includes trigger and hammer assemblies, plus oversized hammer pin, compact pin punch, three hex wrenches, tube of GA No. 1 grease, bottle of GA No. 2 oil, and complete illustrated instructions.

Click Here to Buy Now

  1. Carlos
    January 9th, 2010 at 04:34 | #1
  2. Kenneth
    January 12th, 2010 at 14:30 | #2
  1. No trackbacks yet.